What DVI-D cable please for HP Pavilion?

I have just bought a new Pavilion 500-250ea desktop + Pavilion 22xi screen. Unfortunately the description 'desktop' seems to have been taken too literally by HP <g> - once the PS was in its storage under the desk, then the DVI-D cable supplied with the monitor was too short to reach it, so I shall have to buy a new longer one :-(
Both PC and monitor have dual-mode DVI-D sockets, but the supplied cable was just a single mode DVI-D. Does either/both device(s) actually support dual mode, or will single mode be sufficient for the new cable?

As your HP Pavilion 22xi IPS LED Backlit Monitor only supports up to 1920 x 1080 resolution, a DVI-D single link cable is sufficient for your application.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

What is the battery available for hp pavilion dv4-1502 tu product number(vt100pa#acj)?

what is the battery available for hp pavilion dv4-1502 tu product number(vt100pa#acj)?

Hi:
You can query by the part number listed on your battery if you want the same one or an equivalent.
Below is the link to the dv4 service manual. Supported batteries with part numbers are listed in Chapter 3, page 23.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01597750/c01597750.pdf
Paul

ADC to DVI connector cable - 2 for 1?

Will this cable enable me to run a data projector from the ADC port at the same time as the monitor attached to the DVI?
G5 Dual 2.5 Mac OS X (10.3.7)

Can I use the Belkin ADC to DVI Connector Cable to
connect one of the DVI displays to the ADC output on
the G5?
Yes.
If so, am I right in assuming that I still use the
Cinema Display power connector in addition to using
this adaptor cable?
Yes. The adapter just provides the digital video signals. You still need to plug in the power, USB, and FireWire (if needed) cables from the display
All the documentation seems to be restricted to G4s,
When the adapter came out the only ADC computers were G4s. They haven't updated the documentation, but it will work on a G5.

What downloads do i need for my pavilion 500-267C 64bit desktop ?

I just bought a HP Pavilion Model 500-267C Desktop 64 bit. The page with downloads and drivers lists numerous choices. Do I download all of them to bring my unit up to current spec's or what? Thx for any help.

Hi,
The HP Support Assistant is part of the HP value added software and it will check on a schedule to determine if your PC needs updates. Windows update and many commerical antivirus programs also run on a scheule.
The computer industry spends millions and millions everyday to produce software, BIOS and firmware updates to not only correct problems but also to prevent rediscovery problems from occurring. While you may not be experiencing a problem that is documented by an update today it may trip you up big time tomorrow.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

In need of your assistance please, for HP pavilion DV6 7007tx

Hello,
I previously updated my bios into Insyde F.24 (see attached images) which was ok at first, but when i decided to update my graphics drivers to its manufacturers driver (Nvidia), I started to experience my HP Pavilion DV6 heating up whenever i play games.
I often check and put my graphics setting to balanced in hopes to lessen the heat up a bit. However as soon as i play or open up a game (Fable 3, mass effect 3 and others) the fans starts to spin wildly. To prevent my notebook from overheating i decide to exit my game after 30 minutes of playing and let it cool down first and start again.
I read some points that the update in Bios i made previously possibly has something to do with it, and am now asking your assistance if i can downgrade or roll back into my previous or original Bios.
Would it possible to downgrade? My current Bios version is Insyde F.24. I also searched for a Bios update at HP website and found out the current version i should be running is F.0A. Should i run this?
Any kind suggestion i must do?
Kindly check my notebook info on below images.
Thank you alll in advance.
Regards,
Edgar Duenas
learning and adapting.......

Hello,
Is there not anyone whose kind enough to assist me on this? Please do help for anyone who knows a countermeasure. Thank you all in advance.
Regards,
edgarduenas
learning and adapting.......

Whats the motherboard model number for hp pavilion notebook i3 15-n037cl

So I had gotten an error 90b fan error and it was freezing up on some video games , it was still under warranty but I did not want to part with it for weeks and attemted to clean it myself , I have since ripped the power button ribbon clamp out of the motherboard and it will not power up, My first question is this will not be covered will it?
My next question would be how would you recommend I rectify this error , what is the model number of the motherboard so I can get a replacement? and where can I find some directions on swapping the cpu and attaching what needs to be attached, thanks.
This question was solved.
View Solution.

Yes. It is an i3-3217U with integrated Intel graphics
So this is the motherboard:
Intel Core i3-3217U DC 1.8-GHz (3 MB L3 Cache, 1600MHz DDR3, 17 W) for use with Windows Standard. 737982-501
Also not in stock at Partsurfer.

HDMI Video input upgrade for HP Pavilion Elite m9060n Media-Center PC...What is simplest route?

The Media Centre came with TV tuner etc; I have upgraded the Graphics card to Nvidia GeForce 450GTS which has two HDMI outputs. I need an HDMI input to get the best signal input from my cable box...the best input the existing TV tuner offers is "S-Video",which ain't exactly high-grade. What is the simplest solution for a tech-challenged individual like me? (I don't really need "tuning" facility...but require some form of input. If you help a media-moron the gods will bless you.

You cannot run an HDMI out from a cable-box to a PC Tv-Tuner card in port. THe main reason is industry standard copy protection and HDCP. Unfortunately, you have an NTSC only tuner - so the answer is no HD from cable...only ATSC from an aerial antenna. If you install a QAM tuner, you can run the coax directly in and get unprotected HD programming.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Mini DisplayPort to DVI-D Dual Cable/Adapter for mid-2010 iMac?

Hi . . .
Sorry to pester with a question that's been covered from various angles before, but I'm new to the Mac world. Am a musician in BC, Canada doing a project remotely with people in Ontario. Decided to ditch my PC-based recording rig and went with a 2010 iMac and Logic Pro X (hallelujah!) because the other people are using Logic Pro X. So . . . I'm just learning the ropes.
Anyway . . . I have a spare monitor I want to run in dual setup extended desktop, and I'm not 100% certain of the cable and/or adapter I'll need. I'm also not sure why the adapters are bigger and seem to contain more internal components, whereas the cables just look like a simple "Plug 1" connected to "Plug 2" cable in a variety of lengths (in the same way you'd have a XLR to 1/4" phono cable).
Here's the info on my system, and any help would be greatly appreciated (will a cable suffice or do I need an separate adapter, DVI type, etc).
My iMac (mid-2010 21" Core i3 with Firewire running Moutain Lion 10.8.5):
http://www.everymac.com/systems/apple/imac/specs/imac-core-i3-3.06-21-inch-alumi num-mid-2010-specs.html
My monitor I want use as an extended desktop (Acer 22" X223W LCD):
http://reviews.cnet.com/lcd-monitors/acer-x223w-lcd-monitor/4507-3174_7-32627876 .html
So, it appears I'll need a male Mini DisplayPort to a male DVI-D Dual adapter and/or cable. Do I need to specifically buy a DVI-D Dual cable? Will a simple cable function properly or do I also need an adapter? I'm pretty sure a DVI-I cable won't work because it would have extra pins that aren't present in the DVI-D.
Thanks again . . . the assistance is appreciated.
Suds . . .

You are overthinking this.
"DVI dual link support" is concerned about the resolution of the display, not the number of displays.   A dual-link adapter or cable basically has double the number of wires to carry extra data to support higher resolutions than a single-link cable. Of course, both the computer and the external display must also support the higher resolutions in order to take advantage of the capabilities of dual-link.
You want to use two displays ... your iMac's buit-in display + your Acer display as a second monitor (what you called "dual monitors"). You can do this, as I explained earlier.
Your Acer monitor's maxiumum resolution of 1680 x 1050 is not high enough to require a dual-link connection.
"In single-link mode, the maximum pixel clock frequency is 165 MHz that supports a maximum resolution of 2.75 megapixels (including blanking interval) at 60 Hz refresh. For practical purposes, this allows a maximum 16:9 screen resolution of 1920 × 1080 at 60 Hz (1915 × 1436 at a 4:3 ratio).
To support higher-resolution display devices, the DVI specification contains a provision for dual link. Dual-link DVI doubles the number of TMDS pairs, effectively doubling the video bandwidth. As a result, higher resolutions up to 2560 × 1600 are supported at 60 Hz [via dual-link DVI]."   (See Digital Visual Interface, Wikipedia)
You can connect almost any VGA, DVI or HDMI display to your iMac, using the appropriate cable and/or adapter. Of course, you always have to make sure that your cable has the correct gender plug on each end.   The Apple adapter I recommended has a female connector, so you will need a cable with a male DVI-D plug on one end. As for the other end of the cable, check the input on your Acer display to see what it has and select a cable that has an appropriate gender connector on the end that will plug into your Acer monitor.
In extended desktop mode, you can set separate (independent) resolutions for your iMac display and your external Acer display, taking advantage of the maximum resolution of each.   (For example, that's why the MacBookPro example you cited works, it's because that model MacBook Pro can support higher resolutions on an external display than it's built-in LCD panel can.)

HT5219 I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.

Maximum cable lengths for USB / FW / DVI & sVGA?

I've hunted around on the net and can't find any kind of definitive answer regarding maximum cable lengths for USB, Firewire 400/800 and DVI / sVGA monitors. Can anyone shed some light?
I'm about to shift my studio into a new room, and have the oppourtunity to stick my G5 and external drives into a corridor cupboard adjacent to where my studio is - in other words, noise free bliss! But....
...if I map out how far my computer monitors, keyboard and audio interface will be from the cupboard, and take into account the twists and turns involved in neat routing, I'm looking at a distance of about 10 meters. I need to know if any of these devices will be OK with such a long run of cable, and if not, if it's possible to achieve a good result using hubs or repeaters?
So, can anyone help me out with info on:
an Apogee Ensemble (Firewire 400)
an Apple keyboard (USB 2.0)
an LCD flatscreen (DVI)
and another LCD flatscreen (sVGA)
Many thanks!

I was just researching the very same thing, though it does not sound like my studio setup will be as sweet as yours. Here are a few things I ran across:
FIREWIRE-
"The maximum cable length specified by the IEEE1394 standard is 4.5 meters. However, more recent tests have shown that certain high quality firewire cables can achieve longer lengths without significantly affecting transmission quality. Several manufacturers sell firewire cables longer than 5 meters (some up to 50 meters)."
~http://www.focusrite.com/answerbase/article.php?id=206
I found an example of a company who claims to sell a firewire cable of that length:
http://www.expansys.com/pf.aspx?i=102956
USB-
There is forum discussion on the topic I was reading yesterday:
http://www.everythingusb.com/forums/showthread.php?threadid=804
But don't go past the 11th post or so, they go off on another subject... the use of hubs & the words "active extension" in that post caught my eye. A quick google search came up with this site:
http://www.everythingusb.com/forums/showthread.php?threadid=804
There were a bunch sites with devices claiming to do this.
Finally I have this chart, which seems to support what what the articles say, without of course any other extension technology/solutions:
http://www.extron.com/company/article.aspx?id=dedigform10
I'm not making any claims at all about how true these sources are, I just have the same questions and decided to toss what I've been looking at into the discussion. Feel free anyone to jump in and tell me its all wrong - I'd love to hear whats right.
~sam

In order to start cable service for this device, please contact your cable provider

when i try to watch a program on the xfinity part of tivo i get this message.In order to start cable service for this device, please contact your cable provider . what is wrong.

stormey wrote:
when i try to watch a program on the xfinity part of tivo i get this message.
In order to start cable service for this device, please contact your cable provider . what is wrong.
Apologies for the issue that you described above. I have escalated your issue to the right teams so that we can get On Demand working for you on your TiVo. That team will review your account and contact you directly. Thanks again for your patience.

I want to start a new iTunes U course for catolog and I don't know what can I do please give me description about this title.

I want to start a new iTunes U course for catolog and I don't know what can I do please give me description about this title.

If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

What's the proper protocol for a reset on my ipod touch 4g? iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.

What's the proper protocol for a reset on my ipod touch 4g? iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.
It's a 64G ipod touch and was fine till Apple told me to upgrade to ios 6. Now most of my apps crash, my music won't play and I just get a white screen when I hit Music.
When I try to sync to itunes it acts like it's going to sync and appears to recognize the ipod, but it's grayed out and has an update circle by it that spins for a while until itunes eventually freezes alltogether. Is there a way to go back to ios 5 after a erase and reset?

iOS: Unable to update or restore

HT5299 What kind of cable should I use for movies on my macbook pro if I want to watch it on my 60 inch tv?

What kind of cable for my macbook pro, do I use to watch movies on my 60 inch tv ?

Which model MacBook Pro do you have (e.g., "15-inch Late 2011")?
Clinton

What is the keyboard shortcut for format painting in word please?

what is the keyboard shortcut for format painting in word please?

Goto the menu bar, choose tools and choose customize keyboard. you can then scroll down to format options and set a keyboard shortcut for the format option you are looking for.

What DVI-D cable please for HP Pavilion?

Similar Messages

Maybe you are looking for