What effect would changing the firmware have?

In:
http://discussions.apple.com/thread.jspa?messageID=2398164#2398164
Daniel Azuelos wrote:
Please don't waste any more of your time. 5.6 & 5.7
firmware
aren't stable. Downgrade your AEBS to 5.5.1.
See:
http://discussions.apple.com/click.jspa?searchID=-1&me
ssageID=1657869
dan
Daniel (or anyone else reading this post),
-- What differences should I really expect to see if I:
1) Downgrade to firmware 5.5.1?
2) Downgrade to or remain at firmware 5.6?
3) Remain at or upgrade to firmware 5.7?
-- Thank you,
---- Gino
-

When you went from 5.6 to 5.7,
did it get worse, better, or stay the same?
Same.
Is there
a detailed description of the three different
firmwares (i.e. like modified to allow different
protocols, security, bit rate, etc.)?
http://docs.info.apple.com/article.html?artnum=303072
So, there
should be no other loss of functionality if I go all
the way back to 5.5.1 (i.e. are there some products
that need to connect via a later firmware)?
None that I noticed (and I'm using AEBS in a public
library where hundreds of different users are using
them everyday).
- It is just so incredulous, that a two-step
down-date would actually be better for us! I guess
anything is possible. There were some real slow and
troublesome OSX betas, and early & significant
differences where OSX beta, OS 9, & Classic all
interacted & lived on the same Mac - so I guess that
maybe these firmwares are written with some "yet
future" technologies in mind, at the expense of the
current ones - who knows - I guess Apple would know
that, if it's so.
They know: bug report sent on the 8th of september.
dan

Similar Messages

Good day. I have a problem is a procedure to change the firmware? I have 5,0,1 but with our SIM only works 5,0,0

good day. I have a problem is a procedure to change the firmware? I have 5,0,1 but with our SIM only works 5,0,0

onix_76 wrote:
how come? Documents also have on hand to buy as photo and check the box
So what? The second-hand shop you bought it from didn't follow the right procedures. You also didn't follow the right procedures to make sure that iPhone was not in Activation Lock. It's like buying a car for cash but not getting the title signed over to you. It's not your car if you don' have the title. And that's not legally your iPhone if the previous owner's Apple ID is still registered to the device for Find My iPhone/Activation Lock.
Only a proof of purchase from the ORIGINAL retail store would do any good at all. Return the device to where you bought it and demand your money back. If they refuse, either get a lawyer and/or turn in the device to local police. If you're in possession of stolen property, then the cops won't care about where you got it from.

I have a macbook pro (13inch). I had a firmware password set on it and updated the firmware when apple update told me to. I cannot change the firmware password or remove it now.

Hello,
I have a macbook pro which had a firmware password set on it (security-mode = command).
Update asked me to install updates and one of them was an EFI update. I proceeded and the macintosh booted just fine.
I've tried changing the firmware password, and removing the password without success so far. It's almost like the nvram terminal command does nothing as far as security is concerned.
Help would be appreciated!
J

Apparently the newer macbooks use a different utility than the older macbooks.
setregproptool will ask for the current password, and nvram is not used for these anymore.
J

I would change the language displayed in the login window from u.s. to german

I would change the language displayed in the login window from u.s. to german in Lion (Mac OS X 10.7.2).
I use
sudo "/System/Library/CoreServises/Language Chooser.app/Contens/MacOS/Language Chooser"
Then I enter my admin password and choose german. It doesn't work
Then I use
sudo languagesetup
Then I enter my admin password and type 4 for german. It doesn't work
Still I habe the language u.s. at the login windows.
In the terminal appears following message:
System Language set to: German
2012-01-06 16:18:43.401 languagesetup[311:707] Warning: NSBundle NSBundle </System/Library/CoreServices/Language Chooser.app> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
What shell I do? Can you help me??

I found the solution!
One of the User in my MacBookPro was saved with an old version of FileVault. I deaktivated this old FileVault and aktivate the new FileVault and the language of the login Windows is sudenly german!

What effect does grouping employee subgroups have on personnel calculation

Hi Experts,
Please explain What effect does grouping employee subgroups have on personnel calculation rules?
Thanks,
Rashmi

Hai..
Personnel Management
Personnel Administration
Payroll Data
Basic Pay
Define EE Subgroup Grouping for PCR and Coll.Agrmt.Prov.
Check F1 for PCR.
Now open MODT PCR in PE02. U can find *, 1,2,3, etc... So these are the values which u had defined in the above table..
It means for each ES grouping u want the system to process differently....
Hope its clear now

What effect would re-installing the management server (with DBs intact) have on my configuration?

Hi,
If I have to re-install SCOM (the management server components) on the same Windows Server (i.e. uninstall/re-install) and re-connect to the same SQL Server and DBs, would I lose anything?
My understanding is that nothing is lost in terms of management packs, overrides, views, etc, as everything is stored in the DBs. However, I am not sure about things such as the configuration to connect to Azure Ops Insights.
Does anyone know for sure?

Hi
Uninstalling a Management Server and reinstalling ist no big deal and you should not experince any issue, but there are few things. I would assign the agents before uninstalling to the persistent Management Server, make sure all Management packs are redundant,
Keep track of the ressource pool Membership, scripts running on the Management Server etc. before removing the server
Cheers,
Stefan
Blog: http://stefanroth.net If my post helped you, please take a moment to vote as helpful and\or mark as an answer

What is the effect of changing the physical location of data files

Hello,
Here is the situation:
We have 2 physical hard disks (that's right - 2 separate disks). Their logical drives are respectively C: and D:.
We have an Oracle 9i2 database installed on the first disk C:. We have one database with datafiles on D:.
We want to replace the second disk (with the data files) with brand new one. So here is what we did:
1) We mount the disk and we named it drive F:
2) We stopped all Oracle services
3) We copied all data files from D: to F:
4) We remove the disk with letter D:
5) We renamed the disk F: to D:
So, now the new drive D: has identical structure as the old one.
Before starting the Oracle instance, I would like to ask: Is everything going to be OK when I start the service? Do we need to do something else?
As far as I know Oracle has internal addresses (ROWID) for the data so I think that changing the phisycal addresses of the files won't be a problem. Am I correct?
Thanks in advance.
Best regards,
Beroetz

I think your database can not be opend in this case.
If you follow this method,you can move a datafile to a new address.
1.alter tablespace tablespacename offline normal.
2.move datafile to new folder as you did
3.alter tabespace tablespacename rename datafile 'old datafile including fullpath' to 'new datafaile including fullpath'
4.alter tablespace tablespacename onlin

What effect does a transform function have on the _parent command

Hi
I am trying to load an image onto a symbol in a symbol, that
is spinning via timeline>transform and forms a symbol called
spinner1, spinner2. etc. I want every holder to be a different
image and one use suggested using the _parent function with a
substring function. Will the transform mess this up?
I was suggested to try:
holder.loadMovie("image"+this._parent._name.substring(7)+x);
Which as I understand it tells any instance of the symbol
"holder" to load an image called "image(the seventh letter of the
parent symbol)x" So for any instance of holder in spinner1 it will
load image1x.
My images are assigned using the following:
var image10:String = "logo/jamon.gif"; etc.
"holder" is in "spinner_components"
The symbol "spinner" contains "spinner_components" spinning
using the transform function.
Therefore I also tried the code as:
holder.loadMovie("image"+this._parent._parent._parent_name.substring(7)+x);
and also
holder.loadMovie("image"+this._parent.._parent_name.substring(7)+x);
Neither worked.
Is it the transform function that is messing it all up? or
some syntax?
Thanks

x is a varibale that increase each time it loops and changes
the image displayed.
x is 0, then 1 then 2
spinner is spinner 0, spinner1, spinner2 etc.
thus images should load image00, image01, image02 etc. should
load in spinner0's holder
and images 10,11, 12 etc. in spinner1's holder.
where should this code go - at holder or spinner_components
or spinner.
You can see the final effect (I got arround this problem by
making 8 almost identical spinners)
at
http://danielfield.freewebpage.org.
only my images don't load, like they did in the flash editor.
(I've posted on this separately).
thanks.

What situation would make the dbms_scheduler to delay the execution of jobs

Hello all,
Env: 10.2.0.3
I have a couple of jobs scheduled in DBMS_SCHEDULER to run at 6:00 AM everyday and it used to run at 6:00.
But today instead of 6:00 they ran at 13:00. Next_run_time for jobs are at 6:00AM tomorrow. I checked the log files and but did not hit on anything.
What are the situations that would hinder the scheduler from running jobs
1] If DB is down, scheduler will start jobs once the db is up. [ But in my case DB was up at that time]
2]
Are there any other situation that would make the scheduler wait?
TIA,
J J

Hi,
job_queue_processes is 64
MAX_JOB_SLAVE_PROCESSES is NULL and
sessions parameter is 665. The total sessions has never gone above 150.
There were no jobs running in dba_scheduler_running_jobs.
It so happened yesterday, one of the job scheduled in dbms_scheduler to run at 10:00AM didn't run. Then we manually ran it at around 11:00, though it was successful the last_start_date and next_run_date in the dba_scheduler_jobs didn't change.
select job_name,job_type,start_date,repeat_interval,state,max_runs,failure_count,to_char(last_start_date,'dd-mm-yy hh24:mi:ss') last_start,to_char(next_run_date,'dd-mm-yy hh24:mi:ss') next_start,event_condition,job_priority,comments
from dba_scheduler_jobs where job_name='OFAC'
OFAC EXECUTABLE 03-DEC-06 12.00.00.000000000 AM JAPAN FREQ=DAILY;BYHOUR=10;BYMINUTE=0;BYSECOND=0 SCHEDULED (null) 6 06-04-08 10:00:35 07-04-08 10:00:00 (null) 3 OFAC
Then the scheduler itself ran this job at 13:09 and the dates were changed.
OFAC EXECUTABLE 03-DEC-06 12.00.00.000000000 AM JAPAN FREQ=DAILY;BYHOUR=10;BYMINUTE=0;BYSECOND=0 SCHEDULED (null) 6 07-04-08 13:09:54 08-04-08 10:00:00 (null) 3 OFACI did apply the patchset 10.2.0.3 on 30th of March on this 2 node RAC.
In bdump i can see a log file shcn01_cjq0_2217.trc, which is always being populated with
jsksGetCurWindowId:1 got error 27468
jsksGetCurWindowId:1 got error 27468
jsksGetCurWindowId:1 got error 27468
jsksGetCurWindowId:1 got error 27468
jsksGetCurWindowId:1 got error 27468
jsksGetCurWindowId:1 got error 27468
jsksGetCurWindowId:1 got error 27468
jsksGetCurWindowId:1 got error 27468the same is on node2 also. It started this from the next day after applying the patchset.
Also the ora_cjq0_SHCN01 process is always in the top 3 (since 4 days) in o/p of top command on both nodes.
Any reason for this behavior ?
TIA,
JJ

What's new in the firmwares? - 6230i

Hi,
I have the 6230i with firmware 3.40.
I understand the latest out is v3.62. Can anyone list all the differences between 3.40 and this latest version, or is there a link to a site that lists the changes.
Many thanks,
Jon.

03-Jul-2006
02:23 PM
stuartfawcett wrote:
17-Jan-2006
09:52 PM
karlovac wrote:
I've been looking for this all over the Nokia UK website, but I couldn't find it. Where do you get the firmware update from? -Antun
Antun, Did you ever get a URL? Visual radio upgrade says nokia.com via phone browsing has a download section(i can't find it) http://www.nokia.co.uk/nokia/0,8764,93835,00.html Cheers Stuart
nokia.mobi allowed the visual radio upgrade. But this is not the for phone OS.

What specs would make the perfect MacBook Air for college?

I've decided I'm going to get a MacBook Air for college, but I want to make sure it's the best possible for my four years as an undergraduate so I don't have to get a new one over this time period.
For the processor: how much of a speed difference will there be between the i5 and i7? I'm thinking the i7 will be a better choice, but I really don't know what the difference will be.
For RAM: 4gb should be plenty for four years, right? Right now I have a late 2008 aluminum MacBook with only 2gb of RAM and only recently did I notice it to start getting slow.
Storage: My biggest concern. Will 256gb last me four years? I will be bringing an external hard drive, but I plan on only really using that for Time Machine backups and storage for photos. Should I make the jump to 512gb?
Any help will be greatly appreciated!
-Nick

JasonFear wrote:
The $100 upgrade from 4GB to 8GB (personally) I think is a total no brainer. RAM is one of those things that you can never have enough of and whatever decision you make at time of purchase is the one you're stuck with for the life of the machine. I can't tell you how many times I've had a user with the 2GB model from the previous generation complain of sluggish performance over a lack of available RAM. If it was hundreds of dollars I could see but it's not, especially when you factor in the cost of the machine. Over the course of three years the RAM upgrade translates into $2.78/month and you'd be "future proofing" yourself.
As with previous generations, Apple only lets you upgrade from 256GB to 512GB if you buy the higher end model. Which means you're looking at $1999 for the 13" model with 512GB (4GB of RAM) and $1899 for the 11" model (4GB of RAM). Absolutely not worth it, unless you absolutely have to have 300-400GB of data available locally.
I came into the conversation to clear up wrong information. If there's one thing I've learned in my time posting, more points doesn't mean good information. The OP, who's new, had a question about buying decisions and was given bad information. You've never corrected someone when they wrong? Doubt it...
Regrettably, because this an open discussion forum, we're all free to respond to whoever and whenever. It's very possible that the OP may not know the technical differences between the various CPUs and thus would base his purchasing decision on your false information. Imagine his surprise when he's told that his i7 CPU is a dual core and not a quad core.
Seeing you've asked (so eloquently I might add), I'm happy to provide information on the CPUs.
The i5 in the 13" MacBook Air is an i5-3337U, the i7 is an i7-3667U. Both machines when benchmarked against one another in a PassMark CPU test scored as followed:
i5 - 2,652
i7 - 2,841
A difference of 189 points. You're a numbers guy, Kappy. So if real estate property #1 is worth $2,652,000 and real estate property #2 is worth 2,841,000 how much more is that property worth? It's sure not 25%.
My apologies to the OP for the divergent of your topic, but I think it's important when a frequent poster who's opinion is highly regarded but (other) members on here to be corrected when bad information is provided. I know I would expect the same correction if I recommended something incorrectly.

No effect after changing the message mapping

Hi everybody,
i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
Should it be a cache problem? Where can i delete the caches?
regards,
Sid

Hi,
I guess there can be two things.
before going to the tcode sxi_cache...
Please go to the IR, Click Environment, Cache Notification and then select author as your id.
Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
Now press refresh.
I guess this will resolve your problem

My computer thinks firefox is running and will not open browser window,error = firefox is already running, you need to terminate the process or restart computer. restart has no effect. what file would make the computer think firefox is running?

Reinstalling does not help. Computer locked up for unkown reason and this has happened ever since when i try to start firefox.
Is there a file I can delete or kill that will terminate this process?

See:
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HT204053 My connection Doctor says its connecting to I-Cloud but the SMTP sending accounts are not merging correctly! What do I change the settings to to merge my mail.me accounts across to this?

Hello,
Yesterday under sufference I moved across to I-Cloud from my Mobile me accounts.
I had a deadline of 30th June to merge my email accounts or they would of ceased.
In order to remain compatible I also bought the Lion OSX platfrom which was upgraded from Snow Leopard.
I have moved all my .mac and .me accounts across to I-Cloud and the Connection Doctor recognises them to allow email to be downloaded,
but its seems when the SMTP part of the loggin tries to connect its booted off the mail server.
Im know that I have probably not managed to merge across competely to I-Cloud successfully and wondered if any one can please tell me the
setting I need to change under the mail preference account profiles to ensure this will work correctly.
Thanks
Denise

Hi Roger, Thanks for your suggestions. Do you think in fact that I could delete the SMTP part of the mailservers. It appears that they are dedundant as it now says it used Icloud only?
Thanks
Denise

What Effect Does Dma On/off Have On Dvd?

I know people recommend turning on DMA (which I have done), but i'm very curious as to what having DMA turned off would cause. Any advantages/disadvantages/known issues of having DMA turned on or off?

Without DMA enabled your burner will probably only be capable to burn at very low speeds. And even at low speeds you will run the risk of a failed burn.

What effect would changing the firmware have?

Similar Messages

Maybe you are looking for