What effects is this PHANTOGRAM video using?

I wanted to know what kind of Final Cut Pro filters/effects..etc
Do you think they used to achieve this....
Thanks in advance...
http://www.youtube.com/watch?v=KHo5S93cEi0&feature=related

desaturate in 3 way CC with limit effect to create unequal washing out
a slight flicker (old projector) added with a little vignetting (some it could also be compression artifacting)
x

Similar Messages

  • We got a new Apple TV for Christmas and it works wonderful. However, my question is this. We are on a satelitte internet system and our bandwidth is limited. Can anyone tell me what effect it will have on using up my 10 megs of bandwidth?

    We got a new Apple TV for Christmas and it works wonderful. However, my question is this. We are on a satelitte internet system and our bandwidth is limited. Can anyone tell me what effect it will have on using up my 10 megs of bandwidth? If I run over the 10 mgs, the service either slows way down until it is reset on the first of the next month or I have to purchase additional bandwidth and it can get expensive.
    Any information would be greatly appreciated.

    If you only have a 10MB limit on the Internet connection you might as well not have Internet access and certainly should not attempt to stream anything.
    If the limit is 10GB, then you will need to be careful with streaming as most video is 1-3GB for a one hour show.

  • My iPod touch 2nd generation forced a software update to apply to my ipod via itunes. what effect did this update have on my ipod software, as i still cannot download some apps?

    My iPod touch 2nd generation forced a software update to apply to my ipod via itunes. what effect did this update have on my ipod software, as i still cannot download some apps?
    I would appreciate your support to help me figure out if this problem is solvable.
    The error comes about whilst trying to download certain apps from the app store, including CSR Racing which when i tap on install a message box pops up saying "This App Is Incompatible With This iPod touch", another time for a different app it came up with a message saying "This app requires OpenGL ES 2.0 graphics capability.
    Main questions:
    What was achieved from the latest forces iPod touch 2g update (17/07/2012)?
    solvable problem(s)?
    Will i need to buy a more recent model of iPod touch if this isnt fixable?
    ps. My iPod has lasted me 3 years so far so i am not suprised, still in good nick!
    thanks, Sim x

    i saw something on itunes just a moment ago saying iPod 1g can download 3.1 update for £2.99, will this help with the compatability of the csr racing app at all with that individual problem? |http://support.apple.com/kb/HT2052] (html for this)
    i didnt think graphics could change via software updates

  • When I issue the 'Force group Settings' command what effect will this have on existing flows? Do I need to disable WCCP prior to issuing this command on the affected WAE's?

    Hi WAAS Experts,
    I have a query, when I issue the 'Force group Settings' command what effect will this have on existing flows? Do I need to disable WCCP prior to issuing this command on the affected WAE's?
    Thanks,
    Shankar K

    Hi Shankar,
    A change of classifier/policy on the WAE is not affecting the existing flows so you shouldn't need to disable WCCP if you want to force group settings there.
    Regards,
    Nicolas

  • How did they make the effects in this music video?

    Hi everyone. I've been watching this amazing video thats on Youtube for an electro band called Lifelike. The Song is called So Electric, I believe this isn't even an official video of theirs but some fan put something together which is very very visually striking. The video is here:-
    https://www.youtube.com/watch?v=G22X5X49VhM
    I'm not a beginner with Adobe Premiere Pro, but I don't yet use After Effects. My main educated guesses as to what the editor did some blending of clips with partially translucant opacity, changed numerous colour channels around... they used old VHS footage too. On the thread underneath the video, supposedly he used Imovie to edit it, which is quite basic as far as I'm aware...
    Anyone able to take a good guess?

    I found out that some of the original footage was made using an analogue system called Scanimate, so that answers part of my question. However I still want to know how the editor blended together the different clips and added in aditional effects- anyone?

  • How to create a warm full chorus effect on a vocal track? What effects, plugins or methods to use?

    Hey, I am using Logic pro 9 and have been for quite sometime now. The reason I am here today is because I want to know how to create a warm, more full, (almost doubling) chorus effect for my vocal hooks for the hip-hop tracks that I create. I have always heard that type of effect on hooks and never knew how they did it. For example in this song (This song is not my song, excuse the language but this is the type of effect i am looking for. Go to 1:12 of the song)
    http://www.youtube.com/watch?v=5aok9Hq7GQ4
    This is what I am looking for. PLEASE SOME ONE HELP I WOULD REALLY APPRICATEIT!! Thanks

    True, the equipment that I am using does matter and at the moment I am only using a usb microphone with no pre amps or audio interface. I was asking that question to know what methods people use to create that chorus  effect. What I did for the time being until I get my new set up I had a main vocal track that was centered and had no effect on it, then made 2 other copies so I had 3 tracks all together I panned one track all the way left and the other track all the way right then I applied the stereo spreader to the two copied tracks and turned the mix 76% channel delay 250 same intensity 100% and speed 1.644 Hz. Then I manually moved the tracks so that the left panned track came first then the main track then the right panned track. It was very small moves not to the point were you could tell just gave it that chorus effect. Do you think those were the right things to do? So its close almost there and maybe with the new setup it will be what I am looking for. But PLEASE KEEP COMMENTING EVERYONE HAS THERE OWN METHODS I AM CURIOUS TO KNOW YOURS!

  • In my preferences on my mac mini when i click it, i find the lock the open even after changing the password what would cause this?I use my home wifi network and have never given the password out,as I asked what could cause this?

    What could cause the lock in my preferences to seemingly to click open on there own,I use my home wifi network which is private and have never given out that password either for my network or preferences password.....help,Thank you

    You're welcome.
    Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
    You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

  • Somebody knows what effect was used in this video on the text?

    somebody knows what effect was used in this video on the text?
    im talking about this "extreme drop shadow" he was using please help me i must have it for a project.
    thanks to anyone who can help me.
    Crown the Empire - Initiation - YouTube

    Search Google for "After Effects long shadow" or "After Effects Retro Shadow".
    Or spend a few dollars and buy this:
    http://videohive.net/item/the-ultimate-long-shadow-toolkit/6657312?ref=amigoproductions

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • I am exporting a 2 min video, using a custom compressor setting. i have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

    I am exporting a 2 min video, using a custom compressor setting. I have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

    Name: Vimeo HD Encode
    Description: No description
    File Extension: mov
    Estimated size: 2.3 GB/hour of source
    Audio Encoder
              AAC, Stereo (L R), 44.100 kHz
    Video Encoder
              Width: 1920
              Height: 1080
              Pixel aspect ratio: Square
              Crop: None
              Padding: None
              Frame rate: (100% of source)
              Frame Controls On:
                        Retiming: (Best) High quality Motion Compensated
                        Resize Filter: Statistical Prediction
                        Deinterlace Filter: Best (Motion Compensated)
                        Adaptive Details: On
                        Antialias: 0
                        Detail Level: 0
                        Field Output: Progressive
              Codec Type: H.264
              Multi-pass: On, frame reorder: On
              Pixel depth: 24
              Spatial quality: 75
              Min. Spatial quality: 25
              Key frame interval: 30
              Temporal quality: 50
              Min. temporal quality: 25
              Average data rate: 5.12 (Mbps)
    Compatible with Mac
    My video in the timeline is 1920 x 1080 / 23.98 fps
    I've installed Toast and photoshop elements recently, i also updated my apps the other day.
    I have had this problem before the updates of the apps though

  • What effect is used to provide this relief look on a lapel pin proof?

    I am working on sending a proof to someone for a project and have my file in vector for manufacturing.  I also have it in jpeg format and would like to be able to create an effect like this one shows.  Can anyone point me in the right direction?  It seems the gold outline looks raised and the colors of the pin are sunken in to provide a 3-D effect.
    I am also curious how to "mirror" the image and fill with a solid color to create the backside markings.  I have done this in the past in Corel but am somewhat new to PS.
    The image below is the image I am working with where the black would be raised and the red, white, blue would have the "sunken" appearance

    With the image all rasterized in pixels, you'll have to do it a bit differently than if you had it in vector shapes in several layers.
    Just one possible way to get there from here:
    Increase the canvas size to include empty space all around.
    Select then mask or delete the white surround.
    Duplicate the graphic as a second layer, run Filter - Stylize - Emboss, then set that layer to Overlay.
    Add a Drop Shadow Layer Style to the original layer.
    Test it on several different backgrounds.
    Here's the PSD file if you'd like to look at the individual layers:
    http://Noel.ProDigitalSoftware.com/ForumPosts/EmbossPlusDropShadow.psd
    -Noel

  • Help determining what effect this is...

    Can anyone tell me what effect is being used in this video in seconds 0:41 to 0:47?
    http://youtu.be/z6UogdAqyW4
    Thanks,
    Matt

    What effect? I don't see anything special there, just some basic animation. If you mean the radial "ray" like stuff, then this could be a Bulge effect with strong settings or something similar.
    Mylenium

  • Using Adobe Premier Elements to create a video using the photos and it is make the photos blurry. Is there a setting to correct this?

    as the subject states, i am suing Premier Elements pro to create a video using photos. The photos are clear then when you play the video they become blurry. I would guess there would be a way to correct this but not having much success. any helps would be great.

    Iltowman
    Thanks for the follow up. Right now I see details that do need addressing. For one, you are importing 3:2 photos into a project set for 16:9.
    You still have not told us what version of Premiere Elements that you are using and on what computer operating system it is running. For now I will assume, Premiere Elements 13/13.1 on Windows 7, 8, or 8.1 64 bit. NTSC setup.
    Please try the following as a mini test run (just a few of your photos) to determine if the Timeline photos present better in the Edit area and in an export.
    1. Open Premiere Elements 13/13.1 to the Expert workspace and go to File Menu/New/Project and Change Settings.
    2. In Change Settings, change the settings to
    NTSC
    DSLR
    1080p
    DSLR [email protected]
    OK out of there.
    3. In the New Project Dialog that now opens, rename the project and make sure that you have a check mark next to Force Selected Project Setting on This Project. OK out of there.
    4. Back in the Export workspace, import your photos using Premiere Elements' Add Media/Files and Folders/Projects Assets from where you drag the photos to the Timeline. There will be an orange line over the Timeline content. Press the Enter key of the computer main keyboard. or the Render button above the Timeline to do Timeline rendering which will result in the best possible preview in the Edit area monitor.
    Also, right click the Edit area monitor, select Playback Quality, and then determine if the "Highest" gives better results than "Automatic".
    If all looks good, then let us look at the quality of a AVCHD.mp4 export of that Timeline....
    Publish+Share
    Computer
    AVCHD
    with Presets = MP4 - H.264 1920 x 1080p30.
    Is the quality of the photos in this mini test run better, the same, or worse?
    About your photos (3872 x 2592 3:2)...video is 4:3 or 16:9. So to avoid black borders, you could consider
    a. cropping the originals from 3:2 to 16:9 before import
    or
    b. importing them as is and doing any needed scaling in the Edit area monitor
    But, right now the focus is on image clarity rather than black borders.
    Please review and consider.
    Thank you.
    ATR

  • What effects were used in Desperate Housewives Season 7 Promo?

    Students want to promote something on campus and want to use similar effects as used in the Desperate Housewives Season 7 Promo (see on YouTube here -->  http://www.youtube.com/watch?v=YGt0KEAKBPk )
    What was used to get the great coloring - very bright/sauturated?  Was iT saturation of certain colors only?
    The very orange horizon/sunset effect?
    The clothes 'falling' of the actress while she is walking, changing into other clothes
    Clothes falling of her when she is getting out of the car
    This is really a great promo and as a novice After Effects user, I would love to know how these were created (what effects/plugins/etc).
    Thanks in advance!
    Regards
    Danie

    Way over your head, if you are just a beginner...
    What was used to get the great coloring - very bright/sauturated?  Was iT saturation of certain colors only?
    The very orange horizon/sunset effect?
    Elaborate color correction.
    The clothes 'falling' of the actress while she is walking, changing into other clothes
    Clothes falling of her when she is getting out of the car
    Green screen shooting, 3D matchmoving, 3D animation, corrective warping, morphing and masking.
    All of these are advanced techniques which you won't be able to pull of on your own, even if you had worked with AE for years already. This requires a qualified team and a lot of planning and involves much more than just throwing on a few effects on possibly poorly shot footage...
    Mylenium

  • What type of effect is this?

    What type of effect do i need to use so i could get people from a normal photo to become black like on this one.
    https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/301715_10151222396407903_1747241031 _n.jpg
    thanks!

    HI
    Take your photos--Add a  'threshold' adjustment layer.  It should now be black and white.
    Add new layer.  Bucket fill layer with with desired colour and change layer type from 'Normal' to 'Multiply'.
    By changing the slider on the threshold layer you can reveal or hide more of the original image.
    Stuart

Maybe you are looking for

  • Rate change in Scheduling Agreement

    Dear Gurus, What is the method to change the rate specified in a scheduling agreement. I am receiving material regularly from a supplier, now the rates are changed. how to do this ? regards, Ashish

  • Java.lang.NullPointerException returned from webservice

    Hi I have an axis client which sends an image attachment to an axis webservice, however I am returned with a null pointer exception, this is my client, package chapter5; import java.net.URL; import org.apache.axis.client.Service; import org.apache.ax

  • Setting up inspection point in a scenario require more than one inspection

    Hi all, Maybe I am still not very clear on the PP-QM conceptu2026 hope you can see my problem on the following questionu2026.. According to SAP in the QM-production environment, we key in ONE inspection point in the task list header level (i.e. eithe

  • Not able to add rss to my mac mail

    i m not able to add rss to my mac mail after i deleted my rss folder in my mac mail

  • CS6 mushes fields with 486 source

    This is my first post in this forum.  Hope it hasn't been addressed already. When I bring a D1 NTSC 720x486 source movie into En CS6, the resulting DVD is field-squished, and blurry.  I infer that Encore is scaling the 486 vertical lines into the 480