What EHP and SP level?

How do I determine what enhancement packs and service packs are installed? No, I do not have access to disks or other media. No, I do not have access to people who know.
How do I use Solution Manger or the SAP system itself to determine this?
Thank you.

Hi there,
If you are logged in to a Solution Manager system, you may go to the menu system -> status, then click on the magnifying glass button, and you will see the component versions. Component ST 400 at Support Package levels 18 to 26 are Solution Manager 7 EHP1 versions. ST 400 at levels lower than 18 are Solution Manager 7.
You can also check the software component information at SMSY -> software component information tab, which can be found not at the top node for a system but in a product instance node.
For ERP systems, the EHP level is determined thus: when one or more application components have release 604, that is an EHP4 system. In EHP 4 systems, there are both Basis 700 components, ERP 6 application components in release 600, and EHP4 application componments which are recognized by the release 604. EHP3 is determined by release 603 components, and so on.
This applies for the basis components (SAP ABA and BASIS) as well. SAP ABA 701 means EHP1 for Netweaver 7 is present, SAP ABA 702 means EHP2 is present. There is no EHP3 yet though.
I hope this helps.
Best regards,
Miguel Ariñ

Similar Messages

Could you tell me what's the meaning of the logfile-path and log-level?

we are running an productive xml database. but it is not stable now. Sometime it would report resource conflict error while you access xmldb via http protocol. I read the database logs and listener logs, but no abnormal message could be found. So, I want to find more information from the xmldb logs. While I run select DBMS_XDB.cfg_get().getclobval() from dual, I found that there are several logfile-path and log-level tags and I guess that these would be xmldb logs. Does anyone know what's the meaning of these tags?

I wondered about that one often too. I didn't have a chance yet to investigate (but maybe Mark will elaborate a little here), my guess is that it / or will be a possibility to enable tracing regarding the protocols or servlets.
Though It look like if you enable it it will trace to the XML file defined in the xdbconfig.xml. I also guess that (because there is also a XSD counterpart) that one could create an resource that streams the errors into a XDB ftp or http or ... xmltype table based on these settings.
This would be great because it would mature the protocol server regarding functionality. You could enable the tracing and see what happens. Until now the documentation doesn't give much extra insight...

<element name="ftpconfig">
<complexType><sequence>
<element name="ftp-port" type="unsignedShort" default="2100"/>
<element name="ftp-listener" type="string"/>
<element name="ftp-protocol" type="string"/>
<element name="logfile-path" type="string" default="/sys/log/ftplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="buffer-size" default="8192">
<simpleType>
<restriction base="unsignedInt">
<minInclusive value="1024"/> 
<maxInclusive value="1048496"/> 
</restriction>
</simpleType>
</element>
<element name="ftp-welcome-message" type="string" minOccurs="0"
maxOccurs="1"/>
</sequence></complexType>
</element>

<element name="httpconfig">
<complexType><sequence>
<element name="http-port" type="unsignedShort" default="8080"/>
<element name="http-listener" type="string"/>
<element name="http-protocol" type="string"/>
<element name="max-http-headers" type="unsignedInt" default="64"/>
<element name="max-header-size" type="unsignedInt" default="4096"/>
<element name="max-request-body" type="unsignedInt" default="2000000000"
minOccurs="1"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="server-name" type="string"/>
<element name="logfile-path" type="string"
default="/sys/log/httplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="servlet-realm" type="string" minOccurs="0"/>
...etc...

What's my video adapter's IO address and interrupt level?

I installed solaris8.0 for intel platform. When I logged in as root, the graphic didn't appear normally.
I ran the program KConfiguration, and didn't find the item named "Standard VGA 256 colors". And the program let me input the video adapter's I/O address and interrupt level when I chose to add a new device.
My adapter is S3 Virdge or something like that. It do work on window2000. The windows operating system never let me input the I/O address and interrupt level, and I think it's "Plug & Play". Now, what can I input in the KConfiguration?
By the way, if the graphic is wrong,and I can do nothing on the computer,how can I install the adapter's driver?

http://www.zvenigorod.ru/solaris8x86/hcl.htm

What is prereq for reading above, and for start develop/reading with flex and cf(level?) ?

http://www.adobe.com/devnet/flex/pdfs/getting_started_with_Flex3.pdf
what is prereq for reading above, and for start develop/reading with flex and cf(level?) ?

The Flex Quickstarts will be a place for starters, if you want to know
about Flex/CF integration the first to know would be some basics of CF.
Sincerely,
Michael
Sent from my iPhone

What is Header level data and item level data? Please elaborate.

What is Header level data and item level data? Please elaborate.
Details:
EKKO is Purchasing Document Header; what is purchasing Document Header? who,what and where can i look for this data.
EKPO is Purchasing Document Item; what is Purchasing document item means?
what is item level data means?
When you take the Senario of SRM and ECC; where the purchase data is maintained primarily in SRM or ECC?
Thanks in advance. I will assign the points only to the valuable information.
York.

Hi York,
You are right in stating EKKO as header and EKPO as line item data. They are maintained in ECC.
Now for the details about the data:
In SAP every transaction is referred to as a document. In this case you are talking about a purchase document. Now what does purchaing document contain? I will contain information like: Who is the vendor? When was the transaction done? what was bought? What is the quantity of each item bought?
Whatever is applicable across the document is called header data... and what is applicable for each item is called line item data. In this case
1. Header data would be the vendor, date of transaction, purchaing organization ... etc.
2. Line item data would be the item details, the quantity of the item, the unit price of each item ...etc.
Hope this helps.
Best regards,
Kazmi

What are Header Level, Item Level and Schedule Level data?

Hi ,
Can anyone plz explain me what are Header Level, Item Level and Schedule Level Data in the R/3 system , means what actually is the data structure they contain. If is there any document or links available plz do send. Urgent.
Thanks
Prashant singhal

Hi Prashant,
check this link.
[Extractors;
Regards,
Harold.

What would you think if SCN hides points and displays only your badges and current level?

Hi
After recent change or improvement I must say, in SCN gamification and points system I just came up with an idea that what if SCN hides points completely and calculate and maintain them just they way they are being calculated now?
With this you'll be able to see reputation of users just with their badges (Answer Hero, Story Teller, Thought Leader etc) and their levels (Diamond, Gold, Topaz etc). Would you like that reputation system or this one with points showing with every name.? Please share your thoughts and views.
Thank$

Hi JP
Thank you for being part of this discussion and sharing your views. As you can see there are users with different opinions and its good that we have multiple thoughts on it.
When I post a question and get responses from users and if I like someone's response I always visit his profile and see his badges/level/points and area of expertise. It gives me an idea about his potential and increases my trust level. There are many users who sometimes give foolish suggestions without knowing anything. Some users respond just for the sake of points and they give irrelevant answers. If we see badges and points it gives us or at least me a trust level on poster. This is the reason that reputation system is mandatory for this type of forums.
It doesn't mean newbies can't post good and valuable posts. There can be a newbie who has tons of knowledge and years of experience but he is new in SCN. Exceptions are always there but if we see as a whole you must be agreed that newbies post basic or sometimes irrelevant posts mostly.
As you said points give us a barometer and sometimes this barometer can be misused specially when you are near to get some next level. You must have seen in car racings that driver boosts up speed to his maximum in last lap of race. When a user sees he needs just 300/400 points to reach next level (Topaz/Emerald) etc he can use tricks to get points. If we have only levels and badges and points are being calculating at background users will be contributing positively without curse of points.
This is what I believe in.
Thank$

How do I tell what version (update / release level) of version 6 has been applied to my system?

Question
How do I tell what version (update / release level) of version 6 has been applied to my system? I have applied several different release levels to version 6 of FF but all the about feature tells me is Version 6.0. no version! This seems to be a change in the way updates are handled. Is that a bending because of the speed of which you're pushing out updates and new releases?
contact me if you need something more
''deleted email address''

@cchur <br />
Nope, I never used Chrome, but I did try Chromium on my Windows desktop PC for a few months last year. I got tired of the Google updater. exe running all the time and Google's method of doing updates, so it's gone. I do have Chromium on my Linux EeePC since last summer, but Ubuntu handles all updates and gives the user the capability to accept or deny, any or all updates - much more to my liking, similar to the way Mozilla does it. I don't like software developers forcing to update until I am ready to proceed.
There's a lot more about this new Fast Release system, than just the lack of visible version numbers, that I don't like. The Nightly, Aurora, Beta, & Release sequence is dumb with the way it changes the version numbers. I prefer installing (for instance) what will become version 7 and have that installation progress thru the 4 stages, instead. Now it's like Nightly going from 7 to 8, Aurora going from 6 to 7, and Beta doing - hell, I won't know if it becomes a Release or if it just dies and I will have to install the Release version myself. ''Quite honestly I don't care, because I don't think this new "system" is going to last too long without major modifications. Too damn many users are so pissed off, that when Firefox starts losing large numbers of users, Chrome keeps growing and eventually passes Firefox in number of users and market share of usage - Mozilla will wake up and see the "light" and change back to the way things used to be done, to a certain extent.''
I also dislike the UI changes in 4/5/6/7 enough that I am still using Firefox 3.6 for almost everything and Firefox 2.0.0.20 for the rest. I have been setting my toolbars up almost like Mozilla did for Firefox 4, since Firefox '''0.7''' in 2003 and I haven't come up with a workable combination of mods and extensions to configure Firefox to look and work the way I have been doing for almost 8 years now.

Question about CHKDSK ,S.M.A.R.T and low level format

hi,
I like to know the difference exactly between CHKDSK and S.M.A.R.T and low level format program(I know that low level format writes zero"s) I mean besides the low level format writes zero's what onother
benefits it has , it repairs some bad sectors or mark bad sectors ect?
very short explanation wil be enough.
thanks
johan
h.david

H.david
1-CHKDSK http://en.wikipedia.org/wiki/CHKDSK CHKDSK verifies the
file system integrity on
hard disks or
floppy disk and fixes logical file system errors.
2-S.M.A.R.T http://en.wikipedia.org/wiki/S.M.A.R.T. smart is a monitoring system for
computer
hard disk drives (HDDs) and
solid-state drives (SSDs)<sup class="reference" id="cite_ref-1">[1]</sup> to detect and report on various indicators of reliability, in the hope of anticipating failures.
3-Low level formatting http://en.wikipedia.org/wiki/Low_level_format
Wanikiya and Dyami--Team Zigzag

Dunning Old dinning level and dunning level

Hi experts,
I have one issue in dunning. the issue is where the dunning history for particular customer shows as old dunning level as 3 and dunning level as 2.
i have checked the customer master there is change in the dunning procdure. But the document and master data shows the correct dunning level with the new procdure.
so i didnt understand what is the OLD dunning level and dunning level for the same cusomer. the issue is only with one customer.
I have also checked with old procdure with same customer in table MHNK. there are some notices done. but how come the current invoice shows the old dunning level for the same invoice.
can any once explain me how to proceed.
Regards
Ashok

Hi
Thnks for the reply so we need to apply this note for making the old dunning level and dunning level makes equal after you run the program.
Also one more doubt, since i have observed that the dunning after the parameters entered. looks like this
Parameters were maintained
Dunning selection executed, job deleted
Dunning notice printed, job deleted.
the above doesnt means that they will update the old dunning level right.
Regards
Ashok

Through Programaticaly How To change Dunning Procedure and Dunning level

I am having the requirement to change the dunning procedure and dunning level programatically.
Is there any Function module or BAPI or sample code where I can change the dunning procedure and push the dunning level to
30(No matter at what level but it has to push to 30).

Try these function modules available through T.code FQEVENTS
FKK_SAMPLE_0351 or FKK_SAMPLE_0307 or FKK_SAMPLE_0744 or FKK_SAMPLE_0304
Or try creating one procedure to exclusively handle a particular level /dunning activity only and replace the procedure in the master data
Hope it offers some help

Difference between sales order schedule line and item level data

Hi All,
Could you please let me know what is the difference between sales order schedule line and item level data?
Thanks,
Ramya

Hi Ramya,
Sales order schedule line contains del date, order qty, rounded qty, confirmed qty, delivery qty, schedule line category, purchase requisition etc., ie It contains the full details of sales order data with respect to the scheduled line of delivery. The total quantity of a sales order item can be subdivided into schedule lines that contain the various subsets with the corresponding delivering dates.
Sales order Item level data contains details of the item in the sales order like material code, net price, net value, UoM, PO details, reason for rejection if any, material group,billing date, plant etc., ie this
contains the full details of item irrespective of scheduled line.
Regards,
R. Senthil Mareeswaran.

What minimum Support Package level is needed in BW 3.5 / 640 to be able to

Hello Experts,
A quick question:
what minimum Support Package level is needed in BW 3.5 / 640 to be able to run the SAPGUI 7.10 (including BW add-ons)?
I am also searching at my end.
<removed_by_moderator>
Read the "Rules of Engagement"
Best Regards
Sachin Bhatt
Edited by: Juan Reyes on Jun 29, 2009 11:15 AM

Hi,
Refer the below link
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=30625
A. FEP stands for Front-End Patch. FEPs are the patches that SAP releases for the BW front-end components of the SAP GUI.
They can be downloaded from the SAP Service Marketplace (SMP login required), browsing to the following locations:
BW 3.5 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BW 3.5 ADDON FOR SAPGUI 7.10-> Win32.
BW 7.0 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BI 7.0 ADDON FOR SAPGUI 7.10-> Win32.
Let us know if u have any issues.
Regards,
Ravi

What's a good level to record voiceover?

Hi,
I'm completely new to audio production, and need to record a voiceover. I've got my mic hooked up, and am getting a level of some sort. What I'm wondering is, what's a good level? I mean, I understand that the closer to 0 dB I can get, the better the quality of the sound. But, in practical terms, as one's voice fluctuates, what "general" level should I shoot for? How much level is too little?
It seems that subtle movements of my head in relation to the microphone, or a little extra "energy", and I get clipped. Can anyone offer any suggestions/advice?
Thanks,
Vic

Hi Vixter101,
To add a limiter to the selected track click on the 'i' button on bottom right of GB.
The Info Pane opens. Here you can add/Edit the effects on the Real Instrument Track. You should find the 'AUPeakLimiter' is what you are looking for.
If you need extra help post here again. There are some useful videos by Apple.
http://www.apple.com/ilife/tutorials/#garageband
I personally recommend the macprovideo guys for video tutorials. The Garageband 08 and 09 tutorials are comprehensive and easy to follow.
http://www.macprovideo.com/tutorials/iLife
JG

How to confine various level of planning in to limited and lowest level of planning in DP by the users

Hi Gurus,
May I know the various methods to confine planning level at the lowest level and re-define the Primitive methods where business currently uses in excel sheet and plans at all level into demand planning with a minimum and lowest level by which the business reduces manual work and increases visibility and planning.
Example: Business currently plans at customer Hierarchies which has about 6 levels, product has Hierarchies at 5 levels, location hierarchies at 3 level in excel sheet and on monthly level for an year and then quarterly for 2 years and yearly basis for one year. This we need to confine to lowest level of customer, product and location.
HEIRARCHY LEVEL
PRODUCT
CUSTOMER
LOCATION
LEVEL
P0
C0
L0
HIGHEST
1
P1
C1
L1
2
P2
C2
L2
3
P3
C3
L3
4
P4
C4
SOLD-TO
5
P5
C5
6
P6
CUSTOMER
LOWEST
SKU
PLANNING LEVEL
PRODUCT
CUSTOMER
LOCATION(DISTRIBUTION CHANNEL)
HEIRARCHY LEVEL
P6
C5
L3
LOWEST LEVEL
WHERE
P6
SKU
C5
CUSTOMER
L3
SOLD-TO- PARTY
CVC
P6_C5_L3
So in this case, the cvc are created at lowest level of planning, at P6_C5_L3.
Now how to convenience the business that they need to do the planning at this level for planning, as the rest levels will be aggregated automatically in demand planning.
Is the grouping level place a major role? if so how to do that as the business says for some products they do at p4_c2_L1 level for some they do at P5_C4_L2 level.
Could someone guide us in giving some solution which ease the business need of planning at any level. Hope you have understood my requirement by the above example. If not do let me know, so that I may try to inform by further details. Thanks in advance.
Praveen

Praveen,
Not really sure what the question is. You say you want to 'confine' planning to the most detailed level, but you also want to support planning at an intermediate level.
No matter. DP transparently supports planning at any/all levels simultaneously. Data in DP is always stored at the detail level, no matter which level (or combination of levels) the forecast is entered at.
Creation of the Demand Forecast - SAP Library
Best Regards,
DB49

What EHP and SP level?

Similar Messages

Maybe you are looking for