What else could it (usefully) do?

I was amazed to find how easy it is to use - just wipe my finger across the screen and see the result! Definitely need bigger "wipe" bars in Photoshop/ Photoshop Elements!
What else would I like? Well, many phone camera lenses are a bit fisheye, so it would be very useful to have some of Photoshop Elements' Camera Distortion effects to reduce this.
For the purposes of amusement, it would be useful to be able to distort a part of a picture, say making a nose bigger or a tummy smaller (click on a point on the photo, choose a radius for the effect, choose the scale of the effect). Of course this is exactly the same as reducing fisheye distortion, as if you had selected the centre of the photo as the point, and the whole photo as the radius.
The effect I use the most often in Photoshop Elements is Levels (again, particularly important with a phone camera which isn't high quality). I expand the range of the photo, so the dark greys become blacks and the light greys become whites (Enhance/ Lighting/ Levels or CTRL-L). Could you do this multi-touch?

Thanks for taking the time to share your thoughts! Direct user feedback really helps us understand user needs and trends.
--Charlie

Similar Messages

How to check if home directories are disabled & what else could cause this problem?

We're having this issue with our server where some clients are having an extended authorization time to log onto our server, whether they attempt to do so via VPN or on our Network directly. This issue only seems to persist for some users and happens every time they attempt to log on. Log on can take up to 10 minutes, however, rarely ever fails.
I was told to check size of the home directories but the other IT here said he's pretty sure he disabled the home directory things. The only reason we have these servers is so that people can dump files on them for later use or to transfer between eachother for whichever project they may be working on. How do I check whether the home directories are enabled or not, and if they are, where can I determine their size? All I am seeing in the filesystem is the login for the Admin account and the other IT's account on the server.
What else could be causing this problem? It is not a machine-based problem as I can log into the server using their machine almost instantaneously. About half of our users are logged on instantly as well. We've been getting complaints about this for about a couple months now. It didn't seem to happen prior to February (though I can't say for sure because I started here at the end of January).
The server is an Xserve running 10.5.x or 10.6.x (two different servers). Computers being used range from Mac OS 10.7-10.9.2. I don't believe anyone uses windows that is having an issue.

What you need is the dba_policies
select OBJECT_NAME, POLICY_NAME, ENABLE from dba_policies;

Is twinkle app draining my battery - what else could it be

I have noticed that in the last week my battery does not last a day -after being fully charge in the morning it normally runs out in the early evening when it used to last until the next morning.
The only difference i can think of is that i now use Twinkle - but i am not on it that often during the day. I only check in once or twice and then only for 5 - 10 mins.
Does anyone else have this issue with twinkle or a similar app. What else could it be a none of my other settings have changed re push, wifi, brightness
I do try to make sure i hold my home button down when coming out of most apps until screen shuts down as it has been suggested this makes sure app is fully off.
Any suggestions or similar findings?

then why is my phone draining the battery like never before. It was fully charged 2 1/2 hours ago and now the battery charger looks have way gone! Am hardly using it today to see what happens to battery. Tomorrow may delete twinkle app and see what happens then!
Very strange- any more ideas from anyone about why my battery is suddenly not lasting as long when i have made no changes to setting

Was watching a movie with AirPlay mirroring on apple tv from iMac. Got a Skype call. Turned off AirPlay on atv and on iMac. Could not hear my Skype caller until I unplugged the atv. What else could I have done?

Was watching a movie with AirPlay mirroring on atv from iMac.   Got a Skype call. Could not hear caller until I unplugged atv. Turned off AirPlay on both atv and iMac. Could not hear Skype caller until I turned off atv. What else could I have done?

I checked and found that the router did not have the latest firmware.   It does now.   The issue is still there.   I did a little research and found that the model number of my Apple TV (MC572LL/A) shows that it is a 2G version which uses the A4 chip.   The latest version uses the A5 chip and is 1080 capable. Both are supposed to be capable of using type "N" routers.   I don't think that should be an issue but I wonder if later updates may have introduced some issues in the 2G version.
I am going to try changing the "N" channel also- just to see if that makes any difference. The istumbler app does not show any "N" networks in my area so it is defaulting to 149.   I will note that even 1 foot away from the router I only get 75-85% for signal.   I would expect it to be 100% since it is so close.   I am also seeing noise go up from typically 13% to 21% when it is on channel 3 and that close.       I will play change locations and channels and see if there is any improvement.

HT201335 i have a 2013 model macbook pro and apple tv generation 3 . both connected to the same wifi , still no airplay mirroring icon or in my display setting . what els could be the problem

have a 2013 model macbook pro and apple tv generation 3 . both connected to the same wifi , still no airplay mirroring icon or in my display setting . what els could be the problem

Welcome to Apple Support Communities
Read > http://support.apple.com/kb/HT5404 Do you see the AirPlay icon on the menu bar? If not, restart the router

What else can I use beside Compressor?!

Compressor is now useless to me. Unknown time remaining will not fix. What else can I use? Anyone know?

Look, we understand your frustration and, since we've been hanging out here a long time, we differentiate newbie issues as separate from actual or legitimate problems by seeking information newbies refuse or simply do not understand how to supply. You've added significant information that will allow us to assist you.
Compared to the hundreds of thousands of successful and happy Compressor users, "plenty of people" is not significant.
The next post in this thread suggests your only hope is a complete system wipe and reinstallation. Do you want to try that and report back to us?
It is useless if it doesnt work and yes I've never gotten to use it. I have used lessons on lynda.com. It's not that I don't know what I'm doing. Try a simpler batch, I was using the simplest of batches. The setting is conventional. I spent time on the phone with 2 different Apple tech people who know compressor. I assure you I have spent the entire day trying to fix this to no avail.
I've learned that plenty of other people have this same problem with no solution being offered here or from Apple.
<
bogiesna

What else can be used

Hi all,
am having problem to iterate to next record when using when validate record trigger.
what else can be used instead of next_record to iterate through?
thanks.

following is the problem where i have to calculate backlog by comparing it with the value presented in the database and that of the changed by user.
for exmaple in ven_share table share_quota defined was 100% and user changes it to 40 backlog should contain 60
upto this my logic is working fine but when i iterate to next record i want backlog to show previous + newly changed value..
can you suggest now how can it work in any other way??
declare
     v_share number(3);
     bck number(4);
--     total_bck number(3);
cursor c1 is select share_quota from ven_share where vendor_code=:ven_share.vendor_code;
begin
          first_record;
--open c1;
--fetch c1 into v_share;
for i in c1
loop
     v_share:=i.share_quota;
     if v_share<>:ven_share.share_quota--,:system.cursor_record
          then
          if v_share>:ven_share.share_quota
               then
               :ven_share.backlog:=v_share-:ven_share.share_quota;
               bck:=:ven_share.backlog;
               --next_record;
--     total_bck:=bck+v_share-:ven_share.share_quota;
          end if;
     end if;
--          if :ven_share.vendor_code is null
--               then
--                    null;
                    --bck:=:ven_share.backlog;
          --     else
          --     if v_share>:ven_share.share_quota then
                                   --     message(v_share);
     --     message(:ven_share.share_quota);
          --          :ven_share.backlog:=bck+v_share-:ven_share.share_quota;
     --     end if;
--          end if;
     --     end if;
--     end if;
EXIT WHEN :SYSTEM.LAST_RECORD ='TRUE';
--NEXT_RECORD;
end loop;
end;
thanks

IMac late 2009 reads only 2GB RAM,I have re-installed the card 10 times now,what else could I do?

iMac late 2009 reads only 2GB RAM,I have re-installed the card 10 times now,what else could I do?

Please give us some more details on what exactly has gone wrong with your iMac.
What size RAM module/s are you trying to install and where did you purchase the RAM module/s from?
RAM has to be installed in matched size pairs.
Make sure the RAM module clicks into place. You need to apply a little bit of force to get the module to slide in and clIck into its module slot location.
Correct, compatible and reliable Mac RAM can ONLY be purchased from online RAM sources Crucial memory or OWC (macsales.com).
If you purchased RAM from ANY other source and still can't get the RAM to work, return it for a full refund and buy RAM from the sources I have listed.

The limit to imagination for what we could achieve using Labview

Hiya
I would like to create a user interface by customizing front panel so it could be used as an oscilloscope. This oscilloscope allows user to do following selections.
Analogue or digital signal
which channel
raw binary data or scaled measurement
enter mathematical formula
and then it displays the signal. There are some knobs which could be used to zoom in or alter display to ficilate analysis. This is just imagination, Is it possible to achieve this on Labview. What are the steps please??
Your help is much appreciated.
Ta

You can download and install the NI-SCOPE driver, which includes the NI-SCOPE Soft Front Panel, an oscilloscope application written entirely in LabVIEW. This will give you an idea of what is possible (essentially anything even vaguely reasonable, plus a lot more, limited only by your imagination and skill). Unfortunately, the driver is very large. If you want a picture, check this out.
The underlying architecture of this application is virtually identical to the architecture given in this post. However, you would probably be better off following Ben's suggestion to hone your LabVIEW skills, then dive into the xylophone example.
<fullDisclosure> I am a National Instruments employee. </fullDisclosure>
Message Edited by DFGray on 01-28-2010 08:52 AM
This account is no longer active. Contact ShadesOfGray for current posts and information.

HT5569 My i-touch keeps searching for a wi-fi network where it use to connect and all my other apple devices still connect. I have reset, reload, off and on and off and on....what else could I try?

My ipod touch just keeps searching for a wi-fi connection in my house where it use to connect automatically. My other apple devices still are connecting so not the wi-fi. I have reset to original settings, turned off-on-off-on... nothing seems to work. Does anyone have any ideas?
Thanks!

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. (I think you did this)
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

TS1433 I have tried to reset the SMC and still have the fans running. What else could be causing this?

My iMac has been continuously running its internal fan. Sometimes with just the internet running, or upon startup. I put it into sleep mode and wake it back up, which turns the fan off, but sometimes it starts back up shortly after. I have tried resetting the SMC by powering off and unplugging. Anything else that could be causing this?

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

New to IPS 4240 - What else can I use to manage it?

I have just purchased a Cisco IPS 4240 and have it up and running. Have been using the IEV to view IPS information and that works ok. The VMS 2.2 that came included with the IPS will not work with the current Cisco works (LMS 2.5) installation that we have.
My question is, is there any other tool besides the IEV and the VMS 2.2 that I can use to mange/monitor my IPS? the IEV seems so limited.
I have downloaded the newer VMS from the Cisco site and am planning to test that this comming week, but wanted to know ahead of time if I needed to waste my time with this tool or not.
Thanks!

The latest CSMARS release is promising and honestly the netforensics solution offered by Cisco probably wouldn't be a good fit for the op, but I think Cisco needs to rething pushing the MARS in leui of everything else. As a previous customer of netforensics, and now a user of CSMARS...there are definitely many things that netforensics does better than CSMARS.
My biggest beef with CSMARS is the seemingly casual way in which it treats time and "raw messages". IMHO, these should be sacred to any SIM. I can elaborate, but for the sake of brevity I'll just give a couple examples:
The signature name reported in the "raw message" that MARS makes available is not always correct. Also, custom signature events report as "unknown" in the "raw message". Clearly this is not a "raw message" by any reasonable interpretation...MARS is writing bits that never existed in the original message.
the event contextual information is very often truncated. If you rely on this a great deal, the MARS probably isn't for you. There's also no interface for decoding it, requiring a cut-and-paste into your favorite decoder.
Believe me, I could go on. On the bright side, the MARS is showing promise...I was able to cross off my list quite a few issues after the latest upgrade.
Matt

I opened something that won't seem to quit. Command Q is not working and nothing else will, what else could I do to quit?

I opened something that won't seem to quit. Command Q is not working and nothing else will. What could I do to quit?

Nevermind! I right-clicked on the application and clicked force quit and it worked! That's all I had to do!

I'm currently capturing with an Xha1 camera. What recorder could I use instead for use on cc7?

Instead of using my Xha1 to caputre HD footage to Adobe's cc7 software, is there a compatable HD recorder I could use instead, to save on the wear and tear of the camera's heads?

It depends what frame format you record in. If you shoot interlaced, most any HDV camcorder or deck will work. If you shoot progressive, i.e. 25p or 30p, only Canon devices will work, due to a proprietary method to write to the tape.
The least expensive HDV camera that Canon still sells is the HV40, but I'm sure you could pick up a HV20 or HV30 fairly cheap on eBay or such.
That said, head wear is largely a myth for these cameras, but if you are starting and stopping the tape a lot for transfer, worrying about wear on the transport mechanism is not unrealistic.

Yahoo is no longer loading right due "background" and "font weight" according to the web console but I've cleared the cache and checked the zoom and style settings. What else could suddenly be casuing this issue?

Using Firefox 4.0.1
Get the following errors:
[16:40:58.140] YUI is not defined @ http://www.yahoo.com/:977

Hi,
According to your description, my understanding is that the error occurred when you accessed SharePoint site through form based authentication.
How did you configure the form based authentication?
Here is a link about the steps required to configure FBA in SharePoint 2010 for your reference, and check the steps to see if there anything wrong in your configuration:
http://www.codeproject.com/Articles/352841/How-to-Configure-Form-Based-Authentication-FBA-in
Through the common error message, we cannot find what exactly caused the error.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the?forum=sharepointgeneralprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

What else could it (usefully) do?

Similar Messages

Maybe you are looking for