What else in logical backups

Hi, DBA Professionals,
If i take logical backup of full database, what else in the database to take backup.
is this logical backup will take only logical data or physical data?
if it takes logical only then what about row=y
and what is difference between isqlplus and oem
could you please clarify my doubts.
thanks a lot in advance.

805547 wrote:
thanks a lot for guided me,
i am using 10g R2 database.
if i take complete, incremental, cumulative backups of my database, if i loss whole database is it possible to recover it with logical backups. if it is yes, what is the method.
A "complete, incremental, cumulative backups" would be physical backups using rman. a "logical" backup would be an export (exp or expdp) dump. The logical backup can only be imported back into a working database, and would be a point-in-time snapshot of the data. With use of proper backup options, a proper physical backup can recover a database from a total loss, and to any point in time covered by the backups.
if i loss system datafile only what is the method to recover it using logical backups.There is none. That's why "logical" backups are only one part - and the least important part - of a complete backup/recovery strategy.

Similar Messages

Ok, so I transferred my 3S info to my 4S by restoring from an old phone backup. But SIRI is gone and god knows what else?? Can I get my old stuff into the new phone and keep the 4S new functionality?

ok, so I transferred my 3S info to my 4S by restoring from an old phone backup. But SIRI is gone and god knows what else?? Can I get my old stuff into the new phone and keep the 4S new functionality?

I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

Mouse, trackpad or what else to optimal control for Logic ?

mouse, trackpad or what else to optimal control for Logic ?
give precise models if you have suggestions ty

skanner21 wrote:
i just talk to an apple store guy who told me magickpad was a pain in the *** and very tiring comparing mouse dealing with logic and other audio editors.... ?? so hes stupid ? how can you explain this opposite opinion please ?
I don't know if that guy at the Apple store is stupid because frankly, I don't know him.
But seriously, if he can work better with a mouse then he should use one. I'm sure there are still some people out there who don't like to send email and type a letter with a typewriter then put that piece of paper into another piece of paper (envelope), carry that to the post office which puts those pieces of papers from one truck to another to finally get it to their destination. You get the idea.
The bigger issue is that people don't realize that they get accustomed to a device that is a a compromise to begin with, the mouse. Just think about it what it takes to scroll down in a window on your screen.
In perfect world: You would take your hand and scroll down the window (or tell the computer the command)
Instead, you take your hand, grab a thing (A) that has nothing to do with the window. Now you move that thing A and you see that it corresponds to another thing (B) on the screen, the cursor. No you have to move that second thing on to a third thing ( C), the scrollbar. And now, instead of moving down the scrollbar, you have to move it up in order to move the actual page down. How many un-intuitive (or counter-intuitive) steps does the brain have to learn and process? This is insane.
People are used to it and they don't question it as long as there is no better solution.
Instead of moving a thing that moves a thing that moves another thing. You just move THE thing. The original solution is touch the thing that you want to move. That's why kids use the iPad or iPhone with no problem. It is intuitive and you don't have to learn a compromise. The Trackpad is at least half way there.
Remember when Apple changed the direction of the scroll bar recently. Another great example, where people get p**** when something get easier but they want to keep their old way "moving something up in order to move something down".
I don't say that the Trackpad is perfect (it has other issues) and yes it requires some "un-learning" of old habits. It is still a compromise. My first computer was a Commodore64 about 25 years ago and I used mice all those years but I didn't' have a problem dropping that "thing" in a second.

I ran out of storage for backup. I deleted 1/2 of my pics that was on my iphone and all the videos that I had and also Apps I haven't used in awhile. I still get a message that I can't backup my phone or Ipad. What else can I do?

I ran out of storage for backup. I followed the website directions and delted 1/2 of mmy pics, all my videos and the Apps I haven't used in a while. What else can I do?

Hello Terri0125,
Thank you for using Apple Support Communities!
You have a couple of options here. First you can use this article to manage your iCloud storage:
iCloud: Managing your iCloud storage
http://support.apple.com/kb/ht4847
You can manage the storage either from your device, or from a computer. Whichever is more convenient for you.
You can also backup your device to iTunes for a local backup if you want.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care,
Sterling

HT203177 My backups using Time Machine to my Time Capsule worked fine until a week ago. Since then it gets stuck on "Preparing ...". I have left it preparing overnight and it doesn't get past this stage. What else can I do? Bob

My backups using Time Machine to my Time Capsule worked fine until a week ago. Since then it gets stuck on "Preparing ...". I have left it preparing overnight and it doesn't get past this stage. What else can I do?

Mavericks does really nasty stuff..
Try manually mounting the sparsebundle and extract the files you want.
Yet another Pondini reference. http://pondini.org/TM/15.html
We have avoided Mavericks you see knowing that it would cause these kinds of issues..
You never ever load a new OS without doing a disk image beforehand.. TM is not reliable enough or trustworthy to be depended on.
If none of the above work..
I would get a USB drive on the computer and install Mountain Lion or whatever OS you had before you unfortunately upgraded to Mavericks.. Then use TM from that decent installation but mount the sparsebundle and choose the backup from a date well before mavericks was installed.
Once you have extracted the files.. or even done a full restore you might be able to extract the files you want.

What are the logical structure and physical structure in oracle

what are the logical structure and physical structure in oracle and how can allocate a DB block size as default size is 8192?

From the Concepts Guide
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/toc.htm
The physical structures are:
Datafiles
Control Files
Redo Log Files
Archive Log Files
Parameter Files
Alert and Trace Log Files
Backup Files
The Logical Structures are:
Tablespaces
Oracle Data Blocks
Extents
Segments

There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now?

There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now? I wont be able to make it to the Apple store until tomorow and would prefer if there was something I could do that didnt cost money, my computers very new and I really need help.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HT201263 My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

JesusDGZ wrote:
My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?
I have no clue what you mean by "all the different methods." Here are my suggestions.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Macbook purchased in June acting possessed, not sure what else I can do.

SPECS: MacBook Pro, 2.5GHz Intel Core i5 4gb 1600MHx DDR3 RAM, 500gb HDD running OS X 10.9.4
Okay, so my family purchased me a new MacBook back in June, after my other one died after nearly 5 years. Right out of the box I had problems with it. When I first booted it up, it froze and crashed. After I finally was able to reboot it and get it up and running, it was extremely slow and would constantly freeze. I immediately contacted Apple Support. Unfortunately, I was stuck home after knee surgery and couldn't get it to the store, so they remotely checked my computer out and deemed it was "fine". Okay. They informed me about the warranty, yadda yadda.
So the problems continued, I re-contacted them and they instructed me to take it in for service as soon as I could. I had to wait a bit for my knee to heal up before I could get myself over to the mall. I went, they ran some tests and also declared everything was fine. By this point, my computer was routinely crashing, failing to start up properly, and started just doing.. strange things. They recommended I back all my photos up to an external HD (which I did), bring it back another time and have them completely wipe and reset it. Did that about 3-4 weeks ago.
I've essentially left everything alone besides putting some of my photos back on from the external HD. Not long after they reset it, it's back to doing all sorts of crazy things. I haven't even been able to use this thing besides being a thousand dollar Facebook and email machine.... try and do anything else and it crashes or freezes. I can't even use iPhoto to edit photos because it immediately locks up and I sit there for 5 minutes per photo watching the dang pinwheel go round and round. Now the computer overheats and the mousepad has become possessed. I've started recording some of the bizarre things it does, and showed them at the Apple store and just get a "hmmm..." from them... I can be sitting here watching Netflix and besides barely loading half the time, the mouse just spazzes out and goes all over the screen clicking on things. Trying to type this out is already a nightmare because the mouse just shoots all over the place, clicks on things, highlights things, erases things and goes over to the other dashboard screen... so I'm constantly having to sit here clicking ESC to come back to where I was. The brightness will change from time to time too, and the plugging in/unpluging the power adapter instantly sends the computer into a frenzy (yes, I am using the charger that came with the computer, and it is plugged into a surge protector). When I try to regain control of the mouse, it still shoots all over the place and clicks on things.
I don't know what to do. I've deleted everything, reset everything, put on a firewall, etc. I tried to boot in Safe Mode and it won't work. The computer has a mind of its own. I think there has got to be some sort of problem with the logic board, I don't know what else it could be. I find myself having to hold down the power button to shut it down because it absolutely refuses to shut down if I click on the shut down option on screen.. it pretty much just tells me NOPE.
Please help. The Apple Store/Support said there is nothing more they can do for me because my family apparently purchased it through Best Buy, so they said they don't cover things bought through 3rd party. I wasn't aware of it and not sure if I should try going through Best Buy? I am on the other side of the state from my family now, and none of them are particularly gifted with computers, so not sure if how I would get the receipt from them if that's what I need for Besy Buy, or do I just go there ? I've never dealt with Besy Buy before, but can only imagine how awful that's going to be....
Thanks so much.

Thank you for your reply. I figured I had the one year Apple care warranty regardless, but when I expressed wanting the laptop to be replaced since it seemed defective out of the box, they told me it was pretty much my problem to go deal with Best Buy and do an exchange through them. My last MacBook really had no major issues until it died after 5 years.. very disappointed in how Apple has been handling it this time around. I have another Genius Bar appointment for this Thursday, I guess I will try yet again to see if they can make this right.

TS1878 Disabled ipod due to passcode lock and will not respond at all to recovery steps. Original synced computer not got anymore. What else can I do? I don't care if data lost.

My eldest son gave my youngest son his ipod. He locked it with a passcode, couldn't remember and now it is disabled. Will not work trying to get it in recovery/restore mode. Original synced computer not around anymore, either is eldest. Not worried about losing data as my young son can have it now. What else can I try?? I follow the steps and it still says ipod is disabled on ipod screen. iTunes keeps saying it needs passcode.....

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next try placing the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

What else can be used

Hi all,
am having problem to iterate to next record when using when validate record trigger.
what else can be used instead of next_record to iterate through?
thanks.

following is the problem where i have to calculate backlog by comparing it with the value presented in the database and that of the changed by user.
for exmaple in ven_share table share_quota defined was 100% and user changes it to 40 backlog should contain 60
upto this my logic is working fine but when i iterate to next record i want backlog to show previous + newly changed value..
can you suggest now how can it work in any other way??
declare
     v_share number(3);
     bck number(4);
--     total_bck number(3);
cursor c1 is select share_quota from ven_share where vendor_code=:ven_share.vendor_code;
begin
          first_record;
--open c1;
--fetch c1 into v_share;
for i in c1
loop
     v_share:=i.share_quota;
     if v_share<>:ven_share.share_quota--,:system.cursor_record
          then
          if v_share>:ven_share.share_quota
               then
               :ven_share.backlog:=v_share-:ven_share.share_quota;
               bck:=:ven_share.backlog;
               --next_record;
--     total_bck:=bck+v_share-:ven_share.share_quota;
          end if;
     end if;
--          if :ven_share.vendor_code is null
--               then
--                    null;
                    --bck:=:ven_share.backlog;
          --     else
          --     if v_share>:ven_share.share_quota then
                                   --     message(v_share);
     --     message(:ven_share.share_quota);
          --          :ven_share.backlog:=bck+v_share-:ven_share.share_quota;
     --     end if;
--          end if;
     --     end if;
--     end if;
EXIT WHEN :SYSTEM.LAST_RECORD ='TRUE';
--NEXT_RECORD;
end loop;
end;
thanks

TS3048 can't scroll up and down with wireless mouse, I have checked setting and everything looks good. Any suggestions on what else I can check?

My wireless mouse has stopped scrolling up and down. I have checked my settings and everything looks good. Any suggestions on what else to check?

Hi:
I wish my suggestion had gotten you further.
I do suggest you try to connect the keyboard again. The request for a number is a step in it trying to pair. If it gets by the number, it sometimes takes a little while to get connected. If you are unable to get it connected and want a new one, I have been using Apple Bluetooth keyboards for years - and I like them. The one I have (the newest model) only uses two batteries and is very thin.
Speaking of batteries, if you are not already doing so, you might consider rechargeables. I have a drawer full of them and use a 15 minute charger. I go tired of buying batteries and rechargeables are environmentally friendly to boot. At the moment, I use 2450 mAh Energizers and a 15 minute Energizer charger (all purchased new on eBay at a very reasonable price).
I am far from an iPad "expert," although I have one. If my suggestion below does not help, post your question in a separate thread in the iPad forum.
I had a terrible time syncing my iCal on my Mac with my iPad iCal (confusing - hopefully it makes sense). I quit using iCloud as that added to the confusion. There is a facility to one-time sync items. When you connect your computer to your iPad, iTunes opens. The system begins a process (automatic backup and so on). After it finishes, you can click on "info." At the bottom of the screen, there is an advanced section. You can select any of the items and then force it to sync. The iCal information from your computer would be deposited on the iPad.
After all that, I do not use a Google calendar so the information may be worthless to you.
If you want to reset the iPad to factory settings, you can do that when it is connected to iTunes (one of the options). Me being me, I try never to erase anything.
Barry
Message was edited by: Barry Hemphill

Macintosh HD Library did not migrate. What else is missing?

I recently migrated to a new (identical) MBP Retina with the same OS 10.9.3 and chose to migrate everything. When I compared the two computers, I noticed the new one had about 30 GIG less than the old one. I went through with a fine toothed comb and noticed that the additional content I had downloaded for Logic Pro X which is located in Macintosh HD>Library>Audio had not transferred. Then I noticed that a lot of other data within the Library had not been transferred either. How did this happen and what else might be missing? How can I be sure I have everything I need? I thought ticking all the boxes in the migration meant that everything would be transferred.

Migration Assistant occasionally has oops. Try running it again.
Old post, but in this one Apple Support told the OP to run it several times.
Migration Assistant takes several tries?

Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from

Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from

In addition to the other suggestions, see:
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

What else does "netsh int ip reset" do?

According to
this article when you run the "netsh int ip reset" command, all it does is to reset the content of two registry keys:
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
SYSTEM\CurrentControlSet\Services\DHCP\Parameters\
but on my test system it appears to do more.
On a Windows Server 2012 R2 x64 machine, after my application does something wrong, if I try to set up a static IP to a network interface I get instant BSOD.To fix the issue I have to run "netsh int ip reset" and then I can set a static IP.
Now, I'm trying to figure it out how does "netsh int ip reset" fix the problem.I know is not the content of those 2 registry keys because I did the following
on my virtual machine:
Make a VM backup when the system is troubled.
Launch the VM and run the "netsh int ip reset" command
Export the two registry keys
Roll back to the backup made before the "netsh int ip reset" command
Import the saved registries keys
Set up a static IP on an network interface, but I still get a BSOD
When my application tries to configure a network interface with an IP address that was already used by another network interface in the past, first it has to remove that IP configuration for the non-present device and then it can use that IP.
To do that I search in every registry in SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces and see if any of the interfaces did use the IP addres I want to use by comparing the value in "IPAddress" property with the one I want to use.
If I find a match, I first check if that interface is live, and if it's not, I delete the value in "IPAddress" property and set property "EnableDHCP" to 1, then I use that IP on my interface.
This is what my application did wrong. When this interface comes back live again, it will get an IP configuration through DHCP, but it will BSOD if you try to set a static IP on it.
The correct way to do it is to set "IPAddress" property to "0.0.0.0" and "EnableDHCP" to 1. If you leave "IPAddress" empty and set "EnableDHCP" to 1, something goes wrong in TCPIP configuration, that "netsh
int ip reset" will fix .. but what exactly it fixes, I have no idea. All I know it's that it's not in the two registries keys that the
KB article mentions.
So what else does "netsh int ip reset" do, except resetting the content of those two registries, that fixes the problem on my test system?

Hi,
The analysis result is :
* Bugcheck Analysis *
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 00000000000000a8, memory referenced
Arg2: 0000000000000006, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000298636f, address which referenced memory
Debugging Details:
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002b090e8
GetUlongFromAddress: unable to read from fffff80002b09198
00000000000000a8 Nonpaged pool
CURRENT_IRQL: 6
FAULTING_IP:
nt!PsChargeProcessCpuCycles+10f
fffff800`0298636f 4c296628 sub qword ptr [rsi+28h],r12
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xA
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
TRAP_FRAME: fffff8800584b190 -- (.trap 0xfffff8800584b190)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000001 rbx=0000000000000000 rcx=0000000000000006
rdx=0000000000000022 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000298636f rsp=fffff8800584b320 rbp=fffff80002a4ae80
r8=0000000000000029 r9=0000000000000000 r10=0000000000000000
r11=fffffa800f13518c r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up di pl nz na pe nc
nt!PsChargeProcessCpuCycles+0x10f:
fffff800`0298636f 4c296628 sub qword ptr [rsi+28h],r12 ds:00000000`00000028=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800028d7be9 to fffff800028d8640
STACK_TEXT:
fffff880`0584b048 fffff800`028d7be9 : 00000000`0000000a 00000000`000000a8 00000000`00000006 00000000`00000001 : nt!KeBugCheckEx
fffff880`0584b050 fffff800`028d6860 : fffff8a0`0391c0ac 00000000`00000000 00000000`00000000 00000000`00000002 : nt!KiBugCheckDispatch+0x69
fffff880`0584b190 fffff800`0298636f : fffff8a0`02007f20 00000000`00000000 00000000`00000000 fffff800`00000000 : nt!KiPageFault+0x260
fffff880`0584b320 fffff800`028d403a : 00000000`00000000 fffff880`0584b3e0 fffffa80`0dd1ff00 fffff800`02a031de : nt!PsChargeProcessCpuCycles+0x10f
fffff880`0584b360 fffff880`04b7a02e : fffff880`04b792fc 00000000`00000000 00000000`00000022 fffffa80`0e355e50 : nt!KiChainedDispatch+0x10a
fffff880`0584b4f8 fffff880`04b792fc : 00000000`00000000 00000000`00000022 fffffa80`0e355e50 fffffa80`0f066840 : 0xfffff880`04b7a02e
fffff880`0584b500 00000000`00000000 : 00000000`00000022 fffffa80`0e355e50 fffffa80`0f066840 fffff880`0584b540 : 0xfffff880`04b792fc
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!PsChargeProcessCpuCycles+10f
fffff800`0298636f 4c296628 sub qword ptr [rsi+28h],r12
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: nt!PsChargeProcessCpuCycles+10f
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce7951a
IMAGE_VERSION: 6.1.7601.17514
FAILURE_BUCKET_ID: X64_0xA_nt!PsChargeProcessCpuCycles+10f
BUCKET_ID: X64_0xA_nt!PsChargeProcessCpuCycles+10f
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xa_nt!pschargeprocesscpucycles+10f
FAILURE_ID_HASH: {8eeeeb21-a639-8c21-c8a3-9a37cf39b50b}
Followup: MachineOwner
For the bugcheck, please refer to the article to troublshoot the issue.
Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL
http://msdn.microsoft.com/en-us/library/windows/hardware/ff560129%28v=vs.85%29.aspx
Hope this helps,
Ada Liu
TechNet Community Support

What else in logical backups

Similar Messages

Maybe you are looking for