What equations, units, etc. are used for radial distortion?

This doesn't appear to be in the documentation. I need to convert a lens profile to a different model for lens distortion used in research software, but after measuring the distortion manually for a few pixels, it isn't clear to me how the radial distortion parameters would be applied to get those measured numbers.

Hello all. I downloaded the Adobe Lens Profile Creator to create a profile for the lens of my camera (canon powershot SX40 HS using CHDK), but I am not able to unzip the zip file program. Updated the winrar and even then it still fails. Can anyone help me? Do any of you have a profile for lenses canon powershot SX40 HS?

Similar Messages

What PS file settings are used for still images for FCE?

I have images to use/create for the titles and transitions in my first FCE4 project. Using Photoshop CS6, the preset for File > New > Film & Video has the prest size and pixel aspect ratio selections. I thought to use this with HDV 1080p/29.97 and HDV1080/DVCPRO HD 720 (1.33) for any images I need for the project.
Most discussions I see only refer to the pixel size reference for HD image sizes, but nothing addressing the pixel aspect ratio setting for the image. Are these settings ignored in PS and handled in FCE only? Or does it make better quality images to get this "right" in PS when creating the still image?
Thanks in advance.

I'm not quite sure I understand your question. In an ideal world, the graphic material you build in PS should match the sequence settings you intend to edit them into - so, if for no other reason, it reduces the amount of reformatting FCE has to do when rendering them.
But frequently you want to build graphics larger than the frame size of the sequence so that you can re-size and reposition the graphic within FCE without losing quality.
The apparent pixel aspect ratio of your graphic can be controlled with FCE by editing the graphic to the timeline, double clicking on the clip in the timeline, and when that timeline clip opens in the viewer, click on the motion tab and adjust the Aspect Ratio Paddle (this is the correction for a 1920 x1080 square pixel clip being placed into an HDV 1440 x 1080 timeline):
In Photoshop, you can change the way your work is displayed by going to the menu View > Pixel Aspect Ratio:
Does any of this help?
MtD

When viewing multiple item information, I was wondering what the checkboxes next to "Artist", "Album Artist", etc... are used for.

When viewing multiple item information, I was wondering what the checkboxes next to "Artist", "Album Artist", etc... are used for.

When checked, it means that you are going to apply whatever is in the box to all of the selected items.

What are the steps XI development? What is IDX1, IDX2, IDX5 used for?

What are the steps XI development? What is IDX1, IDX2, IDX5 used for?

Hey
there are mainly two categories of steps
in Integration Repository
data Types
message Types
message interface
Message mapping
Interface mappin
in Integration directory
sender and receiver communication channel
sender/receiver agreement
recever determination
interface determination
IDX1,IDX2 and IDX5 etc are transaction codes used in IDOC scenarios for port,partner profile and IDOC metadata
thanx
ahmad
Message was edited by:
Ahmad

I have a Mac purchaesd in India. Now i am travelling to USA. In India power is at 220V but in USA it is 120V (if i am right). What i need to do. Also what type of plugs are used in USA. Type A,B,C etc.

I have a MacBook Pro purchaesd in India. Now i am travelling to USA. In India power is at 220V but in USA it is 120V (if i am right). What i need to do. Also what type of plugs are used in USA. Type A,B,C etc.

All you will need is a USA adapter for your MBP power adapter since it will work in electrical environments from 100v. to 220V. It seems that a type B will be needed.
en.wikipedia.org/wiki/Mains_electricity_by_country
Ciao.

Which legacy systems are used for what purpose?

Hi gurus,
I tried looking in this forums, but couldnt gather much information on which legacy systems are used and for what purpose? can any body send me a link that can help me understand when and where, which systems are used for what purpose.. I have a general understanding of Legacy systems so i am not looking for terminology explanation, i would appreciate any thing that is related to business and explains the purpose.
thanks,
kishore karnati

Hi,
Term legacy system means tailor made system by group of software developer or any branded software which deals with the group requirement like tally we user for finance.
Legacy system can be based on any technology like visual basis as front end and oracle as back end or Developer 2k as front end and oracle as back end. For report most of the legacy system we have seen uses crystal report.
You can develop and implement based on the requirement from the user though you need to define some specify process to keep the system streamline which is in your hands.
Concept like devlopment/quality/production we don't have that verys strict concept.
More and more they are not intergrated each other functionally mean lets say inventory has come to the godown then your vendor outstanding should increase in finance which does not happens you need to key in the seperate value for it.
Hope this helps!!!

What the steps are useful for us while designing the database by Performanc

Dear Experts
Plz tell me.
What the steps are useful for us while designing the database by Performance point of view.
Like Proper indexing and table assing to specific tbalespace etc

Oracle manuals would do the best for you. There is no step by step rules for tuning the database , had this be true , then Oracle must've write a programme , application or sql script to achive it . I would advise you to go through oracle performance and tuning guide .
Hare Krishna
Alok

What compressor settings settings are best for 1080i to output to DVD using DVD Studio pro?

What compressor settings settings are best for 1080i to output to DVD using DVD Studio pro? I used FCP 6, exported using Quick Time.

DVDs are only SD. There was at one time HD-DVDs, which DVD SP and Compressor can make, but HD-DVDs will only play in Macs and, now obsolete HD-DVD players. HD-DVDs will not play back in standard DVD players or Blu-Ray players. If you want to make a "DVD will be played on DVD player for TV" disc, your only choice is SD.
If you want HD video on a disc, then you want Blu-Ray. You will need a Blu-Ray burner (Apple does not make a Blu-Ray burner so you will have to buy a third-party Blu-Ray burner), Blu-Ray discs and software that will make a Blu-Ray disc. That could be the latest version of Compressor, or FCPX, or Toast, or Encore.

What timeline format shall i use for footage in AVCHD format?

I am shooting with the Sony HXR NX5, and i would like to ask what timeline format shall i use for footage in AVCHD format? I do not see any format in the Final Cut Pro and in Motion that matches my camera format.
Thank you very much for your assistance.
Best regards,
Richard

IF you are working with FCP 7.0.3 (the last version) then you use Log and Transfer to ingest your footage from that camera, and Log and Transfer will convert the AVCHD camera files to ProRes.
Once the camera files are ingested, make a new (empty) timeline, and either drag a source clip or edit it to that timeline and you will be prompted to match the sequence settings to the source clip. Say yes and you should be good to go.
AVCHD, H.264,etc. files are not directly usable in FCP without conversion.
MtD

Which extraction methods are used for extracting AR , AP, GL , cost centre

which extraction methods are used for extracting AR , AP, GL, cost centre account   data from R/3 system.
please let me know what type of extraction we use...generic or FISL.... OR COPA
ON WHAT SCENARIOS WE USE THIS EXTRACTIONS..
if any have documents on it please email...please send an email    documents ..
to [email protected]
iam bit confused with sap help...
will reward full points
please reply

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

Whats a good mac to use for a home flight simulator with flight controls and foot pedals?

whats a good mac to use for a home flight simulator with flight controls and foot pedals?
My old 6100 AV worked great on A10 ATTACK, back in 1993.
whats a good set up now a days?
I havent seen any MAC set ups as a lot of the after market accessories are on Windows platform.
Is there a way or should I get a dedicated simulator on PC?

The fact that USB flight input devices appear to Windows only is not a limitation; for Mac most are programmed through the sim itself. I know X-Plane does that.
I've simmed a lot and know that good sims need a lot of processor and video hardware horsepower, and you'll also need a lot of RAM. They also run up the internal temps. A Mac Pro has better cooling than an iMac. You can get a program like SMCFanControl to manually set up the fans speeds before starting the sim.
I know of no sims today that will still run on a PowerPC Mac (2005 and earlier) so you need to look to an Intel Mac with top specs. If looking at iMacs, start by looking for the quad-core i7 processor. Those models usually came with an up-rated video card. Thing 12 to 16GB RAM.
My 2010 iMac has the 2.93gHz i7 processor, video hardware (ATI 5750) with 1TB VRAM, and 12 GB of RAM. It runs the x-Plane 10 demo fine but I've not bought the full version because v10 seems to make foot pedals darned near mandatory, and I don't want $100 worth of pedals under my regular work desk at the moment.

What host name do I use for Hotmail incoming mail server?

What host name do I use for Hotmail incoming mail server?

Access the homescreen and tap "Settings."
Go to "Mail, Contacts, and Calendars" and tap "Add Account." Your iPhone should display a list of email service providers. Even though you are setting up a Hotmail account, you will be doing it first through Gmail on your iPhone. Tap the Gmail icon to create a new account. Enter your name and a user name and password for the new Hotmail account you will be making later. Enter "imap.gmail.com" in the "HostName" column. Press the "Save" button at the upper right corner of the screen.
Enter your name, email address, password, and the description of the account. Next, click "Save." You should now be able to check your email from the homescreen.
Enter "smtp.gmail.com" in the "Outgoing Mail Server." Enter the password for this Gmail account in the "Password" column. Enter user name for this Gmail account in the "UserName" column. Press the "Save" button at the upper right corner of the screen. Press the "Home" button to return to the iPhone's home screen.
Use the Web browser to go to Hotmail.com and create a new account. Use the user name and password for the account that you entered into the Gmail account on the iPhone earlier. Click on “Settings” after the account has been created.
Click on the "Settings" tab. Click on the "Forwarding" tab. Click on the "Pop/IMAP" tab and select "Enable IMAP." Click on the "Save” button. Click on “Settings” and select “Accounts” and then “Add Another Email Address” from the webpage. Enter the name of your existing Hotmail account in the column. Press “Save.”
Go to the inbox. Open the message from Gmail and click on the link in the message box. Select the “Options” tab and check the “Forwarding email” box.
Send yourself a message to your Hotmail account from an email client. Click on the icon of the Mail program at the bottom of the iPhone’s screen. The email you sent to Hotmail will appear in the inbox of the Gmail account in the iPhone's email.

What r all the tables used for the following report

hai
what r all the tables used for the following report
report:

Report that displays all the late shipments in a particular period of time
send important fields for this tables also
thanks in advance.

Hi,
Imp table are vttk,vttp,vtts.
Regards
Amole

What is FM VC_I_GET_CONFIGURATION actually used for?

Hello ABAP Gurus
I just want know what actually the FM VC_I_GET_CONFIGURATION used for.
What are the input parameters for this function and also what kind of information can I get by calling this FM.
Any feedback on this will be greatly appreciated.
Thanks
Ram

Hi Ram,

VC_I_GET_CONFIGURATION is used to find charateristic value and characteristic description for the given class type and batch number (CHARG) of a material.
call function 'VC_I_GET_CONFIGURATION'
exporting
 INSTANCE = vbap-cuobj
 LANGUAGE = SY-LANGU
TABLES
 CONFIGURATION = i_config
EXCEPTIONS
 INSTANCE_NOT_FOUND = 1
 INTERNAL_ERROR = 2
 NO_CLASS_ALLOCATION = 3
 INSTANCE_NOT_VALID = 4
 OTHERS = 5.
Reward if useful.
Thanks
Aneesh.

What data binding framework to use for EJB(JPA) - Swing desktop application

Hi!
I am developing EJB server application which mostly uses the same entities and session EJB's both for web and for desktop user interface. While JSF is working nicely, I am stuck with necessity to make decision with data binding framework to use for desktop application - I investigated:
- JSR295 reference impementation at java.net (beans binding)
- Eclipse JFace
- JSR295 implementation at kenai.com (better beans binding)
- JGoodies binding
At present I like JGoodies, but I am not sure whether I am not missing something - I guess - large enterprises should develop a lot of desktop applications as well and what binding framework they are using?

user454720 wrote:
At present I like JGoodies, but I am not sure whether I am not missing something - I guess - large enterprises should develop a lot of desktop applications as well and what binding framework they are using?No, not really. I create them sometimes but they are service tools, not part of the main application framework. Generally you keep everything on the server, web based - this keeps it secure, accessible and contained. With all the web 2.0 javascript toolkits available nowadays you can go quite far creating a desktop experience in a browser, with limitations.

What equations, units, etc. are used for radial distortion?

Similar Messages

Maybe you are looking for