What error is this, how can I avoid getting it again?

http://imgur.com/HbCEu.jpg

See the following: Finder Error -10810 in Snow Leopard causing problems.
Also if you have anti-virus software installed temporarily remove (completely uninstall) it in order to determine if it's causing the error to occur.

Similar Messages

  • HT4528 My iphone is telling me I need to do a system restore and wont restart. Screen shows itunes logo and that is it. If I do this how can i avoid losing all my pictures videos etc?

    my i phone is telling me I need to do a restore. Screen shows itunes logo and thats it, even after turning off and on again.
    if  do this how can I avoid losing all my pictures videos etc?

    Pictures/Videos in your camera roll? If so, & not backed up or imported to your computer, they are gone. There's no supported way to recover them now.

  • How can I avoid getting this message whenever I opera Aperture 3.4.3? Thanks

    "Insufficent Disk Space" it then does something to the Aperture Library. I have several Aperture Libraries stored on a 1.5T external hardrive with 1.24 T available. My internal 500G drive has 1.95G availble. Any ideas? Thanks!
    Dennis

    Dennis, there must be something else wrong with your Aperture Libraries, if you are getting this message, with so much free space available. Have your Aperture libraries been last used with an older Aperture version and need upgrading? How do you start Aperture? By clicking the Dock icon? Then try the following:
    If your Aperture Libraries need upgrading to a newer Aperture version, repair them first: Select one of your Aperture Libraries on the external drive, hold down the key combination ⌥⌘ firmly, while you double click the library to launch into the First Aid Tools. Select "Repair Database". See, if Aperture now opens correctly.
    If your Aperture Libraries does not need upgrading to a newer Aperture version, simply double click it to open in Aperture.
    Does any of this make Aperture launch properly on one of your libraries?
    If not, try, if you at least can launch Aperture to create a new, empty Aperture library, by holding down the ⌥-key, while you launch Aperture and select "Other/New".
    Regards
    Léonie

  • How can I avoid getting multiple duplicates?

    I have been getting 5 to 20 or more copies appear in files for unexplained reasons.
    The check box for decreasing duplicates has been checked
    copies are exactly the same except they have sequential numbers.  I erase
    them and they show up again
    I have used a plug in called duplicate finder2 which has not worked
    I also have frequent crashes of LR
    tech attributed this to a Microsoft Error with a .dll file, but even when
    that was corrected the problem persists.
    i have reinstalled LR and PS without benefit
    TAW

    Dennis, there must be something else wrong with your Aperture Libraries, if you are getting this message, with so much free space available. Have your Aperture libraries been last used with an older Aperture version and need upgrading? How do you start Aperture? By clicking the Dock icon? Then try the following:
    If your Aperture Libraries need upgrading to a newer Aperture version, repair them first: Select one of your Aperture Libraries on the external drive, hold down the key combination ⌥⌘ firmly, while you double click the library to launch into the First Aid Tools. Select "Repair Database". See, if Aperture now opens correctly.
    If your Aperture Libraries does not need upgrading to a newer Aperture version, simply double click it to open in Aperture.
    Does any of this make Aperture launch properly on one of your libraries?
    If not, try, if you at least can launch Aperture to create a new, empty Aperture library, by holding down the ⌥-key, while you launch Aperture and select "Other/New".
    Regards
    Léonie

  • HT4914 I get a lot of duplicates on my iTunes music.  How can I avoid getting duplicates and/or how do I remove them?

    I have Windows 8.1.  My iTunes is the latest 11.1.  Since I subscribed to iTunes years ago I have been getting a lot of duplicates on my songs.  I have been removing them one-by-one, but its getting to be too much.  My question is "why do I get duplicate songs".?

    I have Windows 8.1.  My iTunes is the latest 11.1.  Since I subscribed to iTunes years ago I have been getting a lot of duplicates on my songs.  I have been removing them one-by-one, but its getting to be too much.  My question is "why do I get duplicate songs".?

  • I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly.

    I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly. I am on holiday and want to read. Thanks for speedy reply.

    Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your  kind assistance.

  • I have some chrages on my debit card by error how can i avoid this charges

    i have some charges in my debit card by error how can i avoid this charges.... i reset my password as an email said with that resert the charges won´t be reflected in my account?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW:  The operation couldn't be completed. (OSStatus error -61.)

    HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW:  The operation couldn’t be completed. (OSStatus error -61.)

    Hello,
    I believe the issue was the external HD I purchased was not formatted for Mac . . . once I took care of that - all went well!  The slide show transferred and the surprise 70th birthday party was a huge sucess.  Thank you everyone!

  • What is error#2014? How can I solve this?

    Each time I start Muse I get this error #2014. How can I solve this problem?

    Hi,
    Try some solution given in the following thread
    http://support.muse.adobe.com/message/5398405
    Please let us know if the issue persists.

  • I have loaded and reloaded Reader 9.  I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9".  How can I avoid having to do this?

    I have loaded and reloaded Reader 9.  I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9".  How can I avoid having to do this?

    Hello Michael,
    Thank you for your response.  My operating system is XP.  When I try to open a pfd document I just get a series of letters and symbols in a dialog box.  The top of the box says "select the encoding that makes your document readable".  I can choose Windows, MS-Dos, or other (there is a long list to choose from).  None seem to make a difference.  If I save the document to my desk top I can right click on it and choose an option "Open with  AdobeReader 9" and it opens fine.
    Thank you,
    Rick 
    New Edge Technologies
    6525 Peninsula Dr.
    Traverse City, MI 49686
    231.620.2521
    231.941.1284 (fax)
    [email protected]
    Date: Wed, 8 Jul 2009 06:22:51 -0600
    From: [email protected]
    To: [email protected]
    Subject: I have loaded and reloaded Reader 9.  I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9".  How can I avoid having to do this?
    Hello:
    What operating system does your computer use? What happens when you attempt to open a PDF document rather than saving it first? Please include any/all error messages. Also, have you tried opening documents from other locations or just one in particular?
    Thanks,
         Michael
    >

  • How can i avoid displaying runtime error in intractive report

    hi gurus
    my question is, in interactive report when i reach 20th secondary list after that am getting runtime error when i click again. So i wanted to know how can i avoid that run time error.
    regars
    imran

    Hi Imran,
    Basically we can have one basic list and 20 interactive lists.
    Once when we reached to 20th list then it goes to shortdump.
    So, inorder to avoid that we can modify the system field
    SY-LSIND.
    Just see this example and try this. I hope this will be useful for you.
    REPORT  ZSAMPLE1111.
    data: begin of itab occurs 0,
            matnr like mara-matnr,
            mtart like mara-mtart,
            mbrsh like mara-mbrsh,
            end of itab.
    data: begin of jtab occurs 0,
          maktx like makt-maktx,
          spras like makt-spras,
          end of jtab.
    select matnr mtart mbrsh into table itab from mara up to 10 rows.
    loop at itab.
    write:/ itab-matnr, itab-mtart, itab-mbrsh.
    hide itab-matnr.
    endloop.
    at line-selection.
    select maktx spras into table jtab from makt where spras = 'EN' .
    case sy-lsind.
    when '1'.
    loop at jtab.
    write:/ jtab-maktx, jtab-spras.
    endloop.
    when '20'.             * changes see here.
    sy-lsind = 1.
    when others .
    write:/ 'name',sy-lsind.
    endcase.
    I hope this will be helpful for you.
    <REMOVED BY MODERATOR>
    Cheers,
    Swamy kunche
    Edited by: Alvaro Tejada Galindo on Apr 15, 2008 4:01 PM

  • When I create an email signature, the text I type is repeated twice in the actual email sent (above and below a line).  How can I avoid this?

    When I create an email signature, the text I type is repeated twice in the actual email sent (above and below a line).  How can I avoid this?

    Try validating your installed fonts and fixing any errors that show up. To do this see this article: http://reviews.cnet.com/8301-13727_7-20085570-263/safari-in-os-x-lion-replacing- text-with-block-a-characters/

  • Every time I sync my iCal computer with my iPhone 4 or iPad, duplicate entries are generated on both systems. What am I doing wrong or how can I avoid the duplications?

    Every time I sync my iCal on my computer through iTunes with my iPhone 4 or iPad, duplicate entries are generated on both systems. What am I doing wrong or how can I avoid the duplications? I have been doing this for several years and this problem is a more recent issue, like in the last 6 months. I have been deleting the duplicate entries, on both systems, but some duplicates reappear through "general" entries that are connected to the correct color for a Calendar, but not the name. I am going nuts and wasting tons of hours trying to get the 3 calendars to sync without generating duplicate entries.

    Choose one of the Calenders on ONE of the computers OR the MobileMe as the Master / correct account.
    The REINITAILISE the data of MobileMe within preferences on the computer defining the datatransfer correctly (in the advanced box of preferences). The synchronise iphone contacts and calender directly on-line to MobileMe.
    I posted a question on this today, and gave my own reply !
    Regards,
    Kevin

  • I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2.  How can I fix this?

    I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2.  How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.

    What computer do you have?  is it 32 or 64 bit operating system?

  • When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?, When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?

    When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?

    You can search the entire internet by putting that error message into google, see what other discussions appear.
    With only the little information you've provided, I'd trash Compressor and download it again from the App Store.
    You could share the timeline out to MPEG2 and then import that into iDVD, if you have it, or Toast.
    Given an hour or three, someone with better suggestions will soon chime in.

Maybe you are looking for

  • How do I get a text box to expand by user and print all text?

    I am creating a form in Adobe Live Cycle Designer that was converted from a Word file that contains many text boxes.  I would like the text box to expand to accomodate each user's text in edit mode.  When the form is printed - all the entered text sh

  • Why can't see my, or other people's pictures on myspace?

    When I sign in myspace. My profile pictores don't come up, or my friend's pictures either. Now when I called my friends, they CAN see my profile pictures, and other people's also. Can someone pleas help me? I tried contacting Verizon, but they couldn

  • Screen Flickering while using screen

    I am using tilda in openbox. Until I enabled "Double Buffering" in tilda, I was facing the same flickering issue in tilda too. By flickering, I mean that suppose I open a frest terminal in that & then I press BACKSPACE, I get a flicker in screen wind

  • Exclude the currency in F110

    Hi SAP Gurus, Is it possible to exclude the currencies at the time of doing F110 without changing in the configuration level. Please help me for the above issue. Thanks in Advance. Regards Vinu

  • Not updateable view

    I want to create a not updateable view. I want to obtain a not editable JTable to show this view, as when we difine a table model with redefined function isCellEditable() returning false. Thanks Albert Portugal.