What ever changes i have done in vendor details those only i want to displa
i want to dispaly by plsql query
.......it is urgent........plssssssss
You can't do that unless you turn auditing on.
Check Kiran's post in Re: How to setup audit trail for some of our tables
Hope this answers your question
Sandeep Gandhi
Similar Messages
-
I recently updated to Firefox 8 and ever since I have done that, I can't get it to open. Every time I click on the icon on my desktop to open it, it crashes. I have tried all the steps in the Firefox crashes article and I can't figure out what is wrong. How can I fix this?
please install latest version of Roboform 7.6.2 and try
* www.roboform.com/support/news -
Was watching a movie with AirPlay mirroring on atv from iMac. Got a Skype call. Could not hear caller until I unplugged atv. Turned off AirPlay on both atv and iMac. Could not hear Skype caller until I turned off atv. What else could I have done?
I checked and found that the router did not have the latest firmware. It does now. The issue is still there. I did a little research and found that the model number of my Apple TV (MC572LL/A) shows that it is a 2G version which uses the A4 chip. The latest version uses the A5 chip and is 1080 capable. Both are supposed to be capable of using type "N" routers. I don't think that should be an issue but I wonder if later updates may have introduced some issues in the 2G version.
I am going to try changing the "N" channel also- just to see if that makes any difference. The istumbler app does not show any "N" networks in my area so it is defaulting to 149. I will note that even 1 foot away from the router I only get 75-85% for signal. I would expect it to be 100% since it is so close. I am also seeing noise go up from typically 13% to 21% when it is on channel 3 and that close. I will play change locations and channels and see if there is any improvement. -
I am used to that when I open an image in Bridge it will be opened in PS, with all preferenses I have done to the image. Now it opens in PS but without any changes i have don e in Bridge. Also when I open a new image I want it to be opened in Camera Raw automatically, both if a Jpeg or Raw picture.
Using PS CC
Regards BOJ<moved from Adobe Creative Cloud to Bridge General Discussion>
-
Hi, all,
My macbook is running slower than ever. I have done all the updates, emptied my downloads, and installed MS Office 11. I am not sure if I can do anything else?!arupp,
I suggest trying to replace the RAM and the memory storage. This is hard and could potentially ruin your MacBook if you do this the wrong way. Another easier way is to erase thing that you don't need. -
I Have done my Objects in 300 Client.I want to Import it into other client
hi
I Have done my Objects in 300 Client.I want to Import it into other client.
What is the Procedure for that
Please clarify ASAP..
ThanksHi Venkata,
Go through these threads:
Copy the Classification Datasource from Client 300 to Client 010
Regards,
Subhasha Ranjan -
I have a PowerBook G4, 10.4.11. I mistakenly hit a key (don't know what) that changed the entire keyboard into either numbers only when typing or nothing at all with half the keyboard. Please HELP...
Thank you TONS a brody. Really appreciate it.
-
also to note when i hooked up the new phone to the laptop... itunes showed two.... iphone5s under the devices tap but when i go to hit the retore tap it dont restore like my old phone was.. plz help
Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
When I open Facebook on my laptop - I suddenly get tab after tab of facebook opening .... no reason - no changes that I know of .... have tried several things with no positive results.
I'm running windows 7.Thank you for the reply - I did turn off the the facebook tool bar and reset everything in firefox to the default or 'ask me' mode. I was blaming apple, but you are probably correct about the tool bar - I don't think it is supported in my version of Firefox and had disappeared from sight...I didn't realize it was still there until I started going through all my options. Now I know how to stop it if it happens again.
Thank you again.
Pam -
My iCloud storage is full and I need to delete some stuff. Can anyone tell me what is important to keep and what not? I'm just not sure what I really should back up each night and what doesn't really matter. I know my photo's should back up, but other than that, I'm not really sure.
I have taken some pics off and videos and appt, but it still says I need to delete before I can back up on iCloud. I'm starting to wonder if its a glitch with my personal phone. Can anyone help me?
Thanks!Only you can decide what's critical to back up. One option is to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083), then either delete them from your phone or exclude the camera roll from your backup in settings.
You might try going to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll), then look at the size of your next backup. If it doesn't go down significantly, something else is wrong. -
How do I revert back to a version that works?
Hi,
your aspx menus are probably using document cookies to store static information. (f12>Console tab, document.cookie )
ensure that client machines are accepting your company's default GPO settings.
Tools>Internet Options>Security tab,
click "Reset all zones to default"
Content tab, click the "Default" button.
Open a change request with your site developers to feature test for noscript and cookie support in their client side code.
File>Properties to determine which IE Security zone a site is opening in.
Regards.
Rob^_^ -
I used to be able to plug my mac book air to my tv via mini dvi to hdmi cable to tv and watch movies.
The audio no longer projects through the tv? in system preferences, sound, driver for sound output is not supported for my panasonic tv.
Just a couple weeks ago this was not a problem. I just plugged in my computer to the tv and it worked. what has changed?Have you tried a PRAM reset?
http://support.apple.com/kb/HT1379
Ciao. -
How do I determine what Mac OSX I have?
I downloaded the new firefox....it says my system will not support it BUT I cannot get the old firefox back and have lost the ability to use my old firefox.
I do not know how to determine what Mac OSX I have.....
I really want my old firefox back with all my bookmarks, tabs, etc.
Please help.
LauraAnother option to consider is to install the last Firefox 10.0.x ESR version as that version is more recent than the Firefox 16.0.2 version.
*http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/10.0.12esr/
*http://www.mozilla.org/en-US/firefox/10.0.12/system-requirements/
*http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/16.0.2/mac/ -
Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.
The only thing I can think of is if you got a replacement D610 as rumored here:
http://nikonrumors.com/2014/01/27/nikon-is-replacing-some-d600-cameras-with-new-d610-model s.aspx/
In that case, you would need the new version of Camera RAW or DNG converter as per Camera Raw plug-in | Supported cameras .
The other thing to check is if the files open in the Nikon native ViewNX software. If they don't it's time to call the service center. -
Vendor details not coming in MIRO
Dear SAP consultants,
I am facing the following problem.
While doing MIRO only the vendor number displys but the address and othe details doesn't appears
in the same. This is happening for all the vendors. I have checked the vendor details in xk02 and found
that all the details have been maintained. Also The p.o. is showing the detailes address of the vendor.
Insite of that it is not showing in the MIRO.
Please guide me wheather there is any customization for that because in the development server it
is showing the address and all the details of the venDear Pravin & Mohammad,
Thanks for your reply. I have checked the sceen varients for miro in shdo transaction but how
exactly I will come to know which screen varient is done for the same because there are so many screen vareints already available.
Please guide.
Thanks & Regards.
Sandeep
Maybe you are looking for
-
Idoc not visible in Business system
Hello Experts, I am trying to configure a scenario where in I am trying to use the IDoc ZCNOSE_PRICAT.PRICAT02.ZPRICAT1. However, this IDoc is not reflected in the business system in which I am using. I have already released the extension from the ba
-
When I save a CS6 InDesign file as an .idml file InDesign crashes and sends a report to Adobe. When I restart InDesign the .idml file is in the directory as well as a locked InDesign file. I cannot open the .idml file, instead I get the message: Cann
-
Photo Stream doesn't work on Windows 7 (64-bit)
I installed Photo Stream and it just doesn't work. Are there any additional steps I have to take? I see "Photo Stream" icon in "My Computer" but photos are not syncing. iOS 6.1.3, iPhone 4S.
-
My camera won't connect to iMovie
When I click on 'import from camera'. it says that no camera is connected. But my camera is connected. I also checked to see, and my camera is compatible with iMovie. I feel like I have tried everything and I don't know what the problem is. I have re
-
when switching windows regional settings to Arabic, numbers are still shown in Latin characters, unlike other browsers (ex IE). == This happened == Every time Firefox opened == all firefox versions