What exactly a data source is

What exactly a data source is? Is flat file a data source (while extracting from flat file)?

Hi Ganesh,
A datasource is a group of fields whose data can be extracted to BW. Flat file is actually a source system.
See here:
http://help.sap.com/saphelp_nw04/helpdata/en/8a/3045381d10f327e10000009b38f8cf/content.htm
Hope this helps...

Similar Messages

What is an ageing report? What are the data sources used to develop an agin

Hello BW gurus,
I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
Thank you.
TR.
     Developed AR ageing report, created invoice layout and processed invoices.
What is an ageing report? What are the data sources used to develop an aging report
     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
     Involved in the end to end implementation of BW at Reliance Group as a team member.
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
a full life cycle project?
     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
What are aggregates why do you need them?
     Prepared design documents from the Business Requirement documents and identified the
relevant data targets for satisfying the customer requirements.
What are the design documents does one prepare, please give an example.
Is cube a data target?

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

What is the data source name and the data target name for the table COSP

Hi,
Actaully i am new to fico/bw,and i have to create a report based on the actual and budget value and difference in the variance.
in R/3 side the table they are using is COSP,so please let me know what is the data source name and the cube or ods name in BW side.wht are the fields in which i can get the BUDGET value in the report.
here we are using all the business content extractors and BI content cubes and odss.
please reply immediately as its very jurgent isssue.
Thanks,
ashok

answered

What is a data source in BW?

Can anyone explain me what exactly is a data source and how is it used?
Thanks,
bw fresher

A DataSource is not only a structure in which source system fields are logically grouped together, but also an object that contains ETTL-related information.
Four types of DataSources exist:
DataSources for transaction data·
DataSources for characteristic attributes·
DataSources for characteristic texts·
DataSources for characteristic hierarchies
In a source system data source are assigned to particular data appliction componenet.From the business content it is in the form of deliverd (D)version you have covert into Active (A)version.

What extractors or data source do i have to activate to load the TR COOIS

Hi all,
i need to do a report where i must load all the data that the TR COOIS execute in R3, i would like to know what extractor, data source, etc i need to activate to load this data to BW, what advices or what i need to do, please help

Hi,
COOIS/CO27 -- is about Production Order Information System.
http://help.sap.com/saphelp_nw70/helpdata/EN/a1/2d708759fc49ec90f309888b0bdb48/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/72/91a139cc3a5c53e10000000a11402f/frameset.htm
Regards
CSM Reddy

What is the data source for cProjects hierarchy texts 0CPR_GUID?

The cProjects hierarchy will not display texts, only the technical name. I believe I must extract the texts for BW InfoObject 0CPR_GUID. I can not identify the text counterpart to 0DPR_HIERARCHY_ATTR data source for BW InfoObject 0CPR_GUID.
Questions:
1) What is the technical name for the text data source of BW InfoObject 0CPR_GUID?
2) Is this data source included in NetWeaver 04?
Thanks you for your help,
John Hawk
[email protected]
(209) 324-0436

The Answer:
The project element data sources must be mapped to both the project element infosoure AND 0CPR_GUI_TEXT.
For each data source
0DPR_APPROVAL_TEXT to 0CPR_APPROVAL_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_ITEM_TEXT to 0CPR_CHECKLIST_ITEM_TEXT and 0CPR_GUID_TEXT
0DPR_CHECKLIST_TEXT to     0CPR_CHECKLIST_TEXT and0CPR_GUID_TEXT
0DPR_PART_TEXT to 0CPR_PART_TEXT and 0CPR_GUID_TEXT
0DPR_PHASE_TEXT to 0CPR_PHASE_TEXT and     0CPR_GUID_TEXT
0DPR_PROJECT_TEXT to 0CPR_PROJECT_TEXT     and 0CPR_GUID_TEXT
0DPR_TASK_TEXT to 0CPR_TASK_TEXT and 0CPR_GUID_TEXT

What is Attr data source name for SOLD,BILL and SHIP TO PARTY

Hi all,
I want master data source names for these SOLD,BILL and SHIP TO PARTY.
Bill to party,Ship to party and Sold to party Master data source names.
Plz give me Some help on this.
i want solution very urgently.
Thanks,
Guna.

Dear Gunasekhar,
There are no separate datasource for 0sold to, 0ship to and 0bill to parties.
They are referrenced to 0CUSTOMER in BW. and the datasources for 0customer are 0CUSTOMER_ATTR and 0CUSTOMER_TEXT.
Assign points if useful
Regards
Venkata Devaraj!!!

What is the data source to populate ODS 0FIGL_O10

Hi,
The data source 0FI_GL_10 is not available in my source system(OLTP system), so from where should i populate the ods 0figl_o10?
When i installed the ods from business content it automatically took the data source as 0fi_gl_10. but when i try to upload data, ie, when i assign data source to the infosource 0fi_gl_10 in RSA1, the source system does not show 0fi_gl_10. Normally we transfer the data source in source system and replicate it in BW, but this particular data source is not available in source system.
Any idea on which data source should we use instead of 0fi_gl_10?
Regards,
Pradhiba

Hi Pradhiba,
Refer this link:
0FI_GL_10 Datasource
http://help.sap.com/saphelp_nw04/helpdata/en/be/928f40f5767d17e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/757140723d990ae10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
Bye
Dinesh

What exactly is Data? What does that include?

its 2 phones and unlimited talk and text a 40.00 plan

Data is anything transmitted over Verizon's cellular network, such as browsing web sites or streaming music. See if this data calculator helps:
Data Calculator

Can you explain what exactly cdc mean in data services......?

Hello!
I would like to know what exactly change data capture (cdc) mean in data services......?

Hi sudheer kore
CDC is basically a technical term - Change data capture. We use a few approaches to work capture changed data during ETL process. This can be called incremental approach/ delta loading of data.
Source Based CDC
-Using a timestamp, date, datetime, or int column to uniquely identify the next "band" of rows to be loaded into the delta process in combination with a status table, global variable, and where clauses of the query transform. This is demonstrated in the Tutorial file provided with Data Services in the CDC chapter.
-Using the Database native CDC functionality, available in Oracle, SQL Server and I believe Attunity
Changes are replicated to change tables in the source, marked as insert/update/delete. Data Services can natively read these tables through the use of CDC Datastore objects and Map_CDC_Operation transform.
Target Based CDC
-Must be used if the methods above are not available. The Table_Comparison transform is capable of comparing all source records to the target table to determine if an INSERT or UPDATE is required for that row.
Few links that would explain this better
Source Versus Target Based Change Data Capture
Map_CDC_Operation in Data Services
http://sapsimplified.com/sap-bods/map-cdc-operation-transformation/
Regards
Anil Kumar Mehar G

What are Data sources for 0PUR_c10

Hi ,
Now iam activating BCT for 0PUR_c10 cube in BI 7.0
before activating in BI side can i know
1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?
2. plz tell me , what are master data info objects in BW side for MM data ?
i will assign points .....
Thank u
PSR

<i>
1. what are the Data sources for can i activate in RSA5 in r/3 side for Tranastion data and master data ?for that 0PUR_c10 cube ?</i>
PO delivery schedule lines are first consolidated in an ODS through data from the InfoSources Purchasing Data (Document Schedule Line Level) as of 2.0B (2LIS_02_SCL) and Offsetting Confirmation and Goods Receipt (2LIS_02_SGR).
http://help.sap.com/saphelp_nw70/helpdata/en/bb/e99a3d35cf6f53e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/41/2b52e35f153014e10000000a114e5d/content.htm
Do look for the dataflow/network diagram for 0PUR_C10 in Metadata Repository - you can find the BContent Flow.
<i>2. plz tell me , what are master data info objects in BW side for MM data ?</i>
Right click on ODS's & Cubes in MM - Infosource Overview - This will give the list of loadable data targets for associated Datatargets.
Go to RSA5 search for the datasources.

Using different data source and connection name

Hi,
We have a requirement where the data source for our application is already configured on the server by name like MyDBDataSource. But the database connection name in our application is like My_DB. So application module is using data source name like My_DBDS. If i change data source name in application module configuration manually to be MyDBDataSource, then it fails at runtime. This has been identified as bug as mentioned in this post
http://andrejusb.blogspot.in/2009/01/practical-adf-security-deployment-on.html
Is this still valid? I am using 11.1.1.6 version. Also want to know if there is any workaround for this ? If i change the name in web.xml at deployment time using script, will it work ?
Thanks

Hi Ami,
Is your issue get solved ?
I would like to mention few things about the database connection in application & data source in Weblogic.
1. When you create a database connection in Application (for example say connection name as hr) then in the Application Module Database Configurations in the bc4j.xcfg File Custom JDBCDataSource will be set as <Custom JDBCDataSource="java:comp/env/jdbc/hrDS"/> for both ApplnModule shared & Local. So when you create data source in weblogic it is better to create the JNDI Name like jdbc/hrDS ( ie between the '/' and 'DS' you have to specify the name of database connection you created in the application ).What ever the Data source name is no matter.
2.If you change the JNDI name of data source later like jdbc/hrconnectionDS then it is better to delete the old hr connection from application and recreate a connection as hrconnection. After that you have to edit bc4j.xcfg file in the Application Module--> Configurations and set Custom JDBCDataSource as below for both local & shared config.
<Custom JDBCDataSource="java:comp/env/jdbc/hrconnectionDS"/>
I hope this will help you.
Gijith.

Data source for the Partners in Opportunity

Hi,
What is the data source which will get the data for Opportunities with different partners and partner functions. I want to pull the data to bw for the partners in Sales team and Partners tab of Opportunity.
thanks
naveen

Resolved

Data source for Payment trem TEXT

Hi,
What is the data source for payment term text ??
Please let me know soon.
Points assured...
Bill

Hi,
we created a generic text datasource based on table TVZBT (call tran RSO2) since I dind't find any business content for that purpose.
Connect it then to IObj 0PMNTTRMS.
hope this helps...
Olivier.

What exactly a data source is

Similar Messages

Maybe you are looking for