What exactly are bezels when referring to the ipad?

What exactly are bezels when referring to the ipad?

In what context are you seeing this term? The only use of "bezel" in relation to the iPad I can think of is the frame, aka "bezel" that surrounds the screen.
Regars.

Similar Messages

  • HT201210 what should i do when message say the ipad could not be restored. an unknown error occured (2003)

    what should i do when message say the ipad could not be restored. an unknown error occured (2003)

    http://support.apple.com/kb/TS3694#error3194
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • HT204053 What do i do when you lost the Ipad and never turned on find me or icloud?

    I went on a weekend trip and i think i forgot my childs ipad in the room at the camp we were in. i never got the change to turn on icloud or find me. Now i dont no what to do next?

    Welcome to the Apple Community.
    You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.
    If the device is wiped by you or another, you may not be able to locate the device (although some have reported they can)

  • What exactly are the updates good for on an ipod

    I ask because mine is windows format, and im having trouble transferring all the metadata off my ipod with senuti to a back up so that i can reformat the ipod to mac and then sync in my senuti backed up library. I was wondering if anyone knows what exactly are the updates that you get. my ipod is 1.2 5thgen.
    If i were to have the latest update would i be able to see album cover art view when the ipod is plugged into itunes? I noticed that i can see that view in library mode but not in ipod mode. (my pod isnt synced)...
    so what are these updates good for?

    hey thanks for your reply.
    I do have it set to manual and i can see the art on the ipod by itself, but even with manual transfer itunes wont let me view the artwork modes unless i am playing off my computers library (which doesn't have the songs on my ipod on it). I called apple earlier today and some tech support guy claimed that itunes does not support this feature. Is this correct? can anyone out there see artwork modes on an unsynced ipod through itunes?

  • What, exactly, are 'encoded assets'? Why does removing them resolve problems? How can they be avoided in the first place?

    What, exactly, are 'encoded assets'? Why does removing them resolve problems? How can they be avoided in the first place?

    As I understand it, encoding fomats your digital video clips and photos (assets) into Standard DVD mp2 format so that it can be burned to a DVD.  If there has been an error in the encoding process, then you remove the old encoded assets and start over.  There are numberous reasons why there can be errors in the encoding process. 

  • What exactly ARE the .pkg files that collect in the 'Receipts' folder?

    Hi there all.
    Those .pkg files that collect in HDD>Library>Receipts. What exactly ARE these packages for? How do they tie in with Disk Utility's 'Repair permissions' option? Why do we need to keep them?
    It's all Unix to me ;0)

    I used to delete .pkg files after I'd installed an application. I thought i was just the electronic equivalent of throwing away the empty box after I'd bought something.
    The "cardboard box" icon encouraged me to think that.
    Then someone said you should never throw away those.pkg files.
    So I stopped.
    But the only thing that has ever happened is that during permissions repair, I get a few lines here and there that say "could not repair permissions".
    I have experienced no other problems of any kind over about the last 2 years. All applications running normally, nothing weird happening.

  • What exactly are the cron scripts doing?

    Hi,
    Hope the subject says it all: I have searched but not found a detailed explanation as what the cron scripts (daily, weekly, monthly) actually do, and if the utilities (Onyx, Cocktail, Xupport, etc) are doing exactly the same.
    Can someone point to a site or explain?
    TIA
    Dan

    Hi Dan,
    (in addition to Barry's reply)
    Yes,
    1) running the Daily, the Weekly and the Monthly tasks manually with an utility, or
    2) running them yourself with the
    sudo periodic daily
    sudo periodic weekly
    sudo periodic monthly
    Terminal commands
    (or this one: sudo periodic daily weekly monthly), or
    3) leaving your computer running 24/7/365 so that they run automatically,
    all three ways do exactly the same thing.
    --> To see what they do exactly, the best way is to open Console, and in the /var/log section, look for "daily.out", "weekly.out" and "monthly.out".
    What exactly are the "cron scripts" doing?
    (Periodic tasks)
    In Console, you'll find a lot of different files that grow with more and more information every minute, even every second for some of them.
    The three Periodic tasks regularly rearrange them and compresses them so that they don't take too much disk space.
    They also rebuild some system database so that the data never gets unusable by the system.
    HTH
    Axl
    201

  • What exactly are the free levels of Adobe services?

    What exactly are the free levels of Adobe services?

    Cloud Plans http://www.adobe.com/products/creativecloud/buying-guide-at-a-glance.html may help

  • What cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    what cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    Mine has four  Seriously shauntana the splitter is easy, a simple click to changre feed and eventually you will damage the HDMI port or cable by taking it in and out.  True you can only use one feed at a time nut you can only use one port on the telly at one time too.  I used it on my old one port telly for PS3 and Sky and it worked a treat.
    Enjoy
    Jules

  • When setting up yahoo e mail what info are they asking for in the description block

    When setting up Yahoo e mail on i pad2 what information are they asking for in the description block

    It's just a name/description so that you can identify the account in the Mail app. If you have more than one email account set up on the iPad, then that is the name that appears and which you select when switching between them - so it just needs to be something so that you can identify which email account it is so that you know which one it is that you are selecting/viewing

  • In Safari I can define what pages are loaded when I open a "New Window". How do I achieve the same in Firefox (and supress the current begavior of it opening all of the tabs that I defined as my home page all the time)?

    I am returning to Firefox after having used Safari on Mac for the past year. One thing I liked about Safari was that I could define what page gets loaded when I used the File Menu command to open a new Browser Window. I defined this as opening up with my Bookmarks Menu where I then was able to select the page I wanted to go to.
    I have not been able to find a way to define this in Firefox and was surprised to see that "New Window" in Firefox opens all of tabs that I've defined as my Home Page.
    Is there a way to manage this?

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Third Party Applications? What exactly are they?

    Right,
    I've read alot about the Blue Screen that appears when Upgrading to OSX Leopard. I am intending on upgrading tomorrow when my external hard drive arrives so I can Clone my 10.4.11 onto the external hard drive and upgrade the cloned version first but would like to know if I can check in advance for any of these' Third party App's'? and what exactly are they?
    Regards,

    A third party application is anything not made by Apple. It can also include products that Apple purchased fairly recently (some of those "Pro" apps) that weren't coded to Apple's specfications and haven't been well tested. Apple doesn't and shouldn't test their software with third party applications. It isn't their job to test other people's software. They probably make exceptions for things like Office and Photoshop, but that is a short list.
    Most third party applications will be fine. The ones you have to worry about are those that ask for your password when you install them. They can then install any sort of incompatible software.
    After you clone your hard drive, verify that you can boot from the external drive and all your data is there. If so, don't upgrade the external drive. Boot using the 10.5 DVD and immediately run Disk Utility and re-partition your internal hard drive to wipe it out completely. Then install Leopard. Do not use Migration Assistant. Re-install all your 3rd party applications that are 10.5 compatible. Be very careful about copying over from backup anything in a Library/Preferences folder. You can copy any preference file from a third party application back over - those are safe. Anything from Apple may have been upgraded. Only copy over the Apple files that you absolutely have to, such as your Mail folder and Address book file, for example.
    It sounds like a lot of work but it will only take a couple of hours.

  • What indexes are created when we check dimension as line item.

    What indexes are created when we check dimension as line item.
    and also What indexes are created when we check dimension as high cardinality.
    Where can i see that information in the system.
    Answers are highly appreciated.
    Regards
    Kunal

    Hi,
    Line item means it does not have any dimension table.
    High Cardinality means that the dimension is to have a large number of instances (that is, a high cardinality). Also, it is very important to indentify the line item dimension properly. E.g. Sales Order number, this will have the exact number of entries as the fact table entries. Hence, this can be created as a line item dimension. If you are not sure of high cardinality never select that. Activate this function when the dimension has is at least 10%- 20% the size of the fact table (in terms of the number of records). <b>In this case, B tree indices are created instead of bitmap indices.</b>. By default it is BITMAP but with high cardinality it is B-Tree indexing.
    Hope this helps.
    PB

  • What exactly are Field symbols?

    Hi SDN,
    What exactly are Field symbols?
    I have read they are not pointers then what are they?
    Regards,
    Rahul

    Hi
    see this
    Field Symbols
    Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
    Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
    Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
    All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
    You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
    Field symbols provide greater flexibility when you address data objects:
    If you want to process sections of fields, you can specify the offset and length of the field dynamically.
    You can assign one field symbol to another, which allows you to address parts of fields.
    Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
    You can also force a field symbol to take different technical attributes from those of the field assigned to it.
    The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
    While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
    For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
    check the below links u will get the answers for your questions
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
    http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
    Syntax Diagram
    FIELD-SYMBOLS
    Basic form
    FIELD-SYMBOLS <fs>.
    Extras:
    1. ... TYPE type
    2. ... TYPE REF TO cif
    3. ... TYPE REF TO DATA
    4. ... TYPE LINE OF type
    5. ... LIKE s
    6. ... LIKE LINE OF s
    7. ... TYPE tabkind
    8. ... STRUCTURE s DEFAULT wa
    The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
    Effect
    This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
    You can only use one of the additions.
    Example
    Output aircraft type from the table SFLIGHT using a field symbol:
    FIELD-SYMBOLS <PT> TYPE ANY.
    DATA SFLIGHT_WA TYPE SFLIGHT.
    ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
    WRITE <PT>.
    Addition 1
    ... TYPE type
    Addition 2
    ... TYPE REF TO cif
    Addition 3
    ... TYPE REF TO DATA
    Addition 4
    ... TYPE LINE OF type
    Addition 5
    ... LIKE s
    Addition 6
    ... LIKE LINE OF s
    Addition 7
    ... TYPE tabkind
    Effect
    You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
    This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
    In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
    Effect
    Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
    The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
    Example
    Address components of the flight bookings table SBOOK using a field symbol:
    DATA SBOOK_WA LIKE SBOOK.
    FIELD-SYMBOLS <SB> STRUCTURE SBOOK
    DEFAULT SBOOK_WA.
    WRITE: <SB>-BOOKID, <SB>-FLDATE.
    Regards
    Anji

  • My iPad 2 is only 7 months old and is draining battery life quickly some days and others shutting off at 40% - 50% and when I turn the iPad back on it keeps turning it self off continuously. I have a feeling the battery could be faulty, what do I do?

    My iPad 2 is only 7 months old and is draining battery life quickly some days and others shutting off at 40% - 50% and when I turn the iPad back on it keeps turning it self off continuously. I have a feeling the battery could be faulty, what do I do?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

Maybe you are looking for

  • Error while trying to access RSA1 in SAP NETWEAVER 2004 S

    HI friends,             i am working on SAP NETWEAVER  2004s  and have created a few open hub destinations in this and when i tried to delete a  few , system is showing an error " Destination Type is not Supported"  when ever i am trying to access RS

  • Mac G5 and second 23" display

    I already have one 23" (silver) display and would like to use another for all my post production. I'm using a GeForce 6800 Ultra DDL card and my mac is 2.3 ghz. If I get a second 23" display what kind if any issues will I have, even if I can even use

  • Graphs in ABAP

    Hello friends,                      There is a program in ABAP GRAPHICS_GUI_CE_DEMO in which we are getting graphs as output.We have set values in this program(hard coded).Can have an internal table passed in this program.We are using a class cl_gui_

  • MRP parameters

    Dear Gurus, In my MRP views in material master, In House Production Time is defaulted in days, could anyone please tell me if I can maintain this in Hours, If Yes, How? Regards Sri

  • Airport not working after Apple sw updates - HELP PLEASE!!!

    I have a newish MAC Intel. The Airport was working fine for the last 9 months or so until I puled down Apples usual sw updates. I did them all incl the firmware update. Now the Airport wont hook up. I have wireless to NETGEAR router downstairs. I see