What exactly des the HT multiplier affect?

Hi guys.
I recently built a new rig with the K8N Neo2 Platinum primarily based on Anandtech.com's review of it. I've been trying to overclock my system that I built but believe I fried my ram somehow while doing it. Which I still don't understand as Anandtech did some reviews with my ram on this board and were able to get a lot more out of it than I was at.
At any rate my question is:
What exactly does the HT multiplier affect in the bios settings?
Some overclockers have said if you get your fsb over 260 you need it at 3x and if less than that at 4x. I'm assuming this has something to do with your ram but I'm not sure. If someone could shed some light on this I would appreciate it!
Thanks

Quote
HTT (or HT):
HTT (HyperTransportTechnology) is what the Athlon 64 uses as sort of an fsb, the complete story is above so I won't tell it all here. The HTT is the link between the CPU and the Chipset, that runs at a certain speed. The A64 systems get a lot of advantage out of this fast connection. Here are the speeds for the different chipsets:
VIA K8T800pro/nForce4: HTT Multiplier: 5, Actual speed at 200Mhz: 1Ghz
VIA K8T800/nForce3 250: HTT Multiplier: 4, Actual speed at 200Mhz: 800Mhz
nForce3 150: HTT Multiplier: 3, Actual speed at 200Mhz: 600Mhz
Note that any speed above 800Mhz is pretty much overkill, you don't need it because you simply have too little devices to use all the bandwidth. In fact, the 600Mhz of the nForce3 150 hardly gives it a disadvantage, its just not being used...
http://forums.extremeoverclocking.com/showindex.php?t=107925

Similar Messages

What exactly is the auto letterbox and pillarbox option?

Can't find any reference to that preference in the help file. Can someone define exactly what that option does?
I'm guessing its affecting a project I'm working on. I just imported about 40 minutes of footage from a mini-DV camcorder. The person who shot it must have turned on one of those fake widescreen effects in the camcorder because the footage has black bars on top and bottom. Anyway, after the tape was finished importing iMovie put up a status box stating: "Letterboxing - Please wait this may take a while." Well its been about 2 hours now and its still not finished. I'm not even sure what the heck its doing.
Thanks,
Chris

What issue?"
That is what I am asking...Like I said, I am able to open CS5 on my new retina mbp and edit image files with no issue..the only thing that I notice that seems off is the text of the UI seems "fuzzy"....
So, what I am asking is what exactly is the problem supposed to be that I should be seeing?

What exactly are the updates good for on an ipod

I ask because mine is windows format, and im having trouble transferring all the metadata off my ipod with senuti to a back up so that i can reformat the ipod to mac and then sync in my senuti backed up library. I was wondering if anyone knows what exactly are the updates that you get. my ipod is 1.2 5thgen.
If i were to have the latest update would i be able to see album cover art view when the ipod is plugged into itunes? I noticed that i can see that view in library mode but not in ipod mode. (my pod isnt synced)...
so what are these updates good for?

hey thanks for your reply.
I do have it set to manual and i can see the art on the ipod by itself, but even with manual transfer itunes wont let me view the artwork modes unless i am playing off my computers library (which doesn't have the songs on my ipod on it). I called apple earlier today and some tech support guy claimed that itunes does not support this feature. Is this correct? can anyone out there see artwork modes on an unsynced ipod through itunes?

What exactly does the Radio Beacon Indicate

I have seen cases where the Radio Beacon is black and when it is gray. When it's black you may or may not be able to go through the wireless router to the modem and then to the internet. When it is gray, you cannot really do anything except be in a local mode. However there are instances when the Radio Beacon is black, rather than gray, and you still cannot access the internet. So, what exactly does the activated Radio Beacon Indicate, i.e., that the wireless network is working and the modem is down, or something else entirely ?

Assuming you're referring to the Airport icon in the menu bar, 'clear/empty' means Airport is turned off, gray bars means Airport is on but not connected to a network, and black bars means Airport is on and connected to a network. Other possible icon states are solid gray with a little computer inset, meaning you're connected to a computer-to-computer created on the Mac, and gray bars with an exclamation point (10.6 only), meaning connected to a network but not authenticated (e.g. wrong password for an 801.2X corporate/university network).
To your question, it's perfectly possible to be successfully connected to a network (black icon) and unable to access the internet. Situations like that would include the network requiring a proxy server, for which you haven't set up the details on in Network Preferences, or you're connected to an open network that requires you to enter information or agree to terms (e.g. a hotel network, where you need to put in your room number and agree to the charges before you can connect to the internet).

What exactly does the global switch command line do ?

Hello All
Just foraging in the dark world of APP-V. I have a question which I cannot find answer for through google.
There are powershell commands to publish an APP-V application globally. What exactly does the global switch do ?
I understand it makes the application available to everyone on the machine for anyone who logs onto that machine.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
Thanks

Correct, the global switch makes the application accessable for all users logging on to that system.
This feature is required for some packages, like Office. But it is ofter used for applications used by everyone, like Adobe Reader.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
A package can be added to the system but until it is published a user cannot start it. They won't see any shortcuts in their startmenu/desktop/etc.
So after you added the package to the system, it must be published to a user or globally (every user) to start it.

What "exactly" does the Brightness setting in Print do?

What "exactly" does the Brightness setting in the Print module do?
I know it's a controversial button, especially now that there are proofing options available. Also, since you're using it "blind" it's impossible to know how much or what it's really doing.
Does anyone know if it's e.g.. the same as going to quick develop and going up on "exposure", or "brightness", or "shadows"... How exactly is it brightening the image, and is +100 a full stop or how is it calibrated?
Thanks,
Alan.

Ooops,
Obviously there is NO brightness control in LR...is the print adjustment similar to an exposure adjustment or more like moving the "shadows" and "whites" adjustments (which if I understand corrrectly, moves tones above or below mid tones, but not highlights or blacks)?

What exactly are the cron scripts doing?

Hi,
Hope the subject says it all: I have searched but not found a detailed explanation as what the cron scripts (daily, weekly, monthly) actually do, and if the utilities (Onyx, Cocktail, Xupport, etc) are doing exactly the same.
Can someone point to a site or explain?
TIA
Dan

Hi Dan,
(in addition to Barry's reply)
Yes,
1) running the Daily, the Weekly and the Monthly tasks manually with an utility, or
2) running them yourself with the
sudo periodic daily
sudo periodic weekly
sudo periodic monthly
Terminal commands
(or this one: sudo periodic daily weekly monthly), or
3) leaving your computer running 24/7/365 so that they run automatically,
all three ways do exactly the same thing.
--> To see what they do exactly, the best way is to open Console, and in the /var/log section, look for "daily.out", "weekly.out" and "monthly.out".
What exactly are the "cron scripts" doing?
(Periodic tasks)
In Console, you'll find a lot of different files that grow with more and more information every minute, even every second for some of them.
The three Periodic tasks regularly rearrange them and compresses them so that they don't take too much disk space.
They also rebuild some system database so that the data never gets unusable by the system.
HTH
Axl
201

I wish I could remember what exactly happenned the last time I upgraded iphoto years ago, but something

I wish I could remember what exactly happenned the last time I upgraded iPhoto years ago. Did my address book go kaflooey? But whateverit was, it discouraged me from any updating eversince. Believe it or not, I have been limping along with Iphoto 6.0.6 and basically faring fine, given my needs. But I would now like to be able to order prints from my photo library -- and you can't do that any longer with 6. So my question is: what are the things that
can go wrong with the later systems? And is there any way around having that happen?

Make a back up.
Make a second.
Upgrade. Get on with your life.
Regards
TD

What exactly does the Work Offline option do in a shared review hosted on an internal server?

Hi,
What exactly does the Work Offline option do in a shared review hosted on an internal server?
I *think* it simply disconnects you from the review server. I'm not sure why one would want to do this.
I'm trying to recommend an offline workflow for reviewers who may not be able to access a shared review hosted on our internal server (for example, while traveling). These reviewers would like to be able to comment on an offline version of the review PDF and then publish their comments when they can again connect to the Internet/internal server.
It doesn't seem like "Work Offline" is the right fit for this scenario. Instead, should reviewers save a local copy to their hard drive, comment on it, and then, when reconnected to the Internet, open the local copy, click Reconnect to Server, and then click Publish Comments?

Thanks, Dave. So for my hypothetical traveling reviewer, it would be reasonable to suggest the following steps for an offline workflow?
1. Connect to the shared review.
2. Choose Work Offline from the Server Status menu.
3. Close and save the review PDF locally.
4. Comment while traveling.
5. When back in the office, open the local copy of the review PDF.
6. Click Reconnect to Server.
7. Click Publish Comments.

What exactly is the diff between main window and variable window

what exactly is the diff between main window and variable window in SAP script?

hi,
MAIN WINDOW :- In a main window you display text and data, which can cover several pages (flow text). As soon as a main window is completely filled with text and data, the system continues displaying the text in the main window of the next page. It automatically triggers the page break.
You can define only have one window in a form as main window.
The main window must have the same width on each page, but can differ in height.
A page without main window must not call itself as next page, since this would trigger an endless loop. In such a case, the system automatically terminates after three pages.
VARIABLE WINDOW :- The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different form pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the form.
hope this will be useful.
If useful then reward points.
with regards,
Syed

What exactly are the free levels of Adobe services?

What exactly are the free levels of Adobe services?

Cloud Plans http://www.adobe.com/products/creativecloud/buying-guide-at-a-glance.html may help

What exactly is the issue with CS5 and the retina display?

Just picked up a late 2013 MBP with retina display and have PS CS5 running on it.
What is the exact issue that I should be having when it comes to running CS5 on these machines ? Is it just that the UI looks fuzzy? Other than that it seems to run fine and my photos look fine also.

What issue?"
That is what I am asking...Like I said, I am able to open CS5 on my new retina mbp and edit image files with no issue..the only thing that I notice that seems off is the text of the UI seems "fuzzy"....
So, what I am asking is what exactly is the problem supposed to be that I should be seeing?

What exactly is the advantage of VPN?

I work in an architectural office of about 15 people. We've always had access to our wiki, files and calendars when out of the office.
Currently we have a Standard setup of Leopard Server with the following services: iChat (using just a private local domain), iCal (with all calendars delegated to one another), AFP file server (3 different groups) and Wiki Server.
What exactly would the advantage be to us of VPN, over simply connecting to a file server via "Connect to Server...", accessing our Wiki via the office IP address, and subscribing directly to our calendars from home?

VPN: Virtual Private Network.
Virtual: implemented without needing specific hardware; uses existing networking hardware and connections. Non-virtual ("real" or "physical") private networks typically involve dragging network wires around or broadcasting signals of your own, or leasing T1 or SONET lines and other such gear from a communications vendor.
Private: A private network is (preferably) difficult to eavesdrop from the open WiFi at the coffee shop, easier to control access. Non-private networks are also known as open networks, and that ftp or telnet or imap/pop password you just entered can be read by others on the same network. That, and the entire contents of the mail messages you have sent and received over the open network are also accessible.
Some private networks are less secure than others. The WEP-based security provided by some WiFi networks is now usually considered to be analogous to a wide-open WiFi; WEP is quite weak, and tools to break it are widely available. WPA is rather better here, and anyone using WEP should move to WPA, or better. (qv: the TJX credit card data exposure was reportedly due to the use of WEP.)
Most VPNs also have some form of authentication; a certificate, smartcard or token card, or other such challenge. Passwords are one of the weakest mechanisms here, but there are VPNs that use just passwords.
+I guess too, there is some additional functionality added. For instance if you're logged into the VPN with a work laptop, presumably if you update your server-based calendar it will update the server as well.+
No. A VPN is and should be assumed nothing more than a network connection. The difference is in the degree of privacy provided. Beyond the encryption and authentication typically inherent, VPNs do not add application-level features over what an open network connection might provide.
An ssh tunnel is a specific form of VPN, and does reasonably well at providing security and at avoiding exposing your password and your data.
Network: as with open networks, VPNs can be used to allow client systems to access a network, or to bridge two or more networks together. VPNs can also provide a reasonable way to manage the connections between these networks, or a client connecting into a network. For the purposes of discussing connectivity, a VPN is another form of a network connection.

What exactly is the JInitiator?

I'm new to deploying forms on the Web and noticed that the JInitiator is installed on all users computers the first time they run the URL of my application. What exactly is the JInitiator and what is it's function?

to run Forms in the web you need a JVM. You can use the Sun Plugin or the modified version from oracle, called JInitiator. With the first install your HTML checks, if the actual version on your browser uses the correct version or it downloads the version from Sun (sun plugin) or your Application Server (jini).
The Jinitiator has some benefits. Some cache-mechanisms helps you - stuff which isn't available in the standard edition of the sun plugin
After the installation of the plugin you have to download one-time the java-applet, called generic applet. This is the program which interacts with the OAS and shows you the forms-application, which runs on the OAS in a forms-runtime

What exactly is the fifth generation iPod?

I currently own an iPod mini and am thinking of upgrading. What exactly is the fifth generation iPod and what special features does it have?

these documents might be of some assistance:
Identifying different iPod models
Features Guide

What exactly des the HT multiplier affect?

Similar Messages

Maybe you are looking for