What exactly is this OST file?
Hi,
I have started using Outlook recently and so, I want to know each and every information relevant to it. I was wondering that what this OST fle this. Please help me out in knowing what is OST file and also guide me to create one.
Thanks in advance
B_D
Bruce_Anderson wrote:
Hi,
I have started using Outlook recently and so, I want to know each and every information relevant to it
Then post your question to a Microsoft Office forum, as it's not an Apple product has nothing to do with compatiblity issues between Mac OS and Windows, which is the topic of this forum.
I was wondering that what this OST fle this
http://lmgtfy.com/?q=what+is+an+ost+file
Similar Messages
-
In the second step of bootcamp, I am supposed to either check the box where it says create a windows install disk, what exactly is this? Do I need to do this? I have a windows 7 install disk, but I don't know what this means.
If you already have Windows on a DVD or USB drive, you don't have to tick that option. That's only for people who have Windows on a ISO file and have to burn it into a USB drive
-
Consolidate Masters - what exactly does this do?
Hi all
I am a relativity new aperture user. every time i import images from my camera, they have the little arrow in the bottom corner to show they are referenced files.
I can fix this by clicking file>consolidate masters and choose to move or copy them.
Forgive the basic-ness of this question, but what exactly does this do? And why can't i import them so they are not referenced files?
thanks again for your helpI suggest you read the manual for this sort of questions, but anyway, here's a quick answer:
-consolidate masters moves or copies your images to somewhere withing your library, making them managed instead of referenced.
-the import dialog, when you connect a card has the option to copy the files to anywhere on your disk, to pictures or to the library (making them managed, and thus not showing the little arrow).
For the advantages and disadvantages of either, check this forum or again, the manual.
j -
My iPhone became wet at the beach. I put it in rice for 4 days. When I connect to itunes, it says the phone must be restored. It starts and then gives either the error 2001, or 2006. What exactly does this mean, and is it worth getting repaired?
Thank you...http://support.apple.com/kb/TS1275
Water damage isn't covered by warranty, but you could always purchase a refurbished device from Apple. -
My iphone 4 automatically shuts down , twice it has happened though it starts by holding the home screen and sleep button for 10 seconds but what exactly causes this problem? some defect in my set?
do you hold the home and sleep button?
-
What exactly ARE the .pkg files that collect in the 'Receipts' folder?
Hi there all.
Those .pkg files that collect in HDD>Library>Receipts. What exactly ARE these packages for? How do they tie in with Disk Utility's 'Repair permissions' option? Why do we need to keep them?
It's all Unix to me ;0)I used to delete .pkg files after I'd installed an application. I thought i was just the electronic equivalent of throwing away the empty box after I'd bought something.
The "cardboard box" icon encouraged me to think that.
Then someone said you should never throw away those.pkg files.
So I stopped.
But the only thing that has ever happened is that during permissions repair, I get a few lines here and there that say "could not repair permissions".
I have experienced no other problems of any kind over about the last 2 years. All applications running normally, nothing weird happening. -
One computer at COMPANY-A is attempting to communicate with two
computers located at COMPANY-B, via an IPsec tunnel between the
two companies.
All communications are via TCP protocol.
All devices present public IP addresses to one another, although they
may have RFC 1918 addresses on other interfaces, and NAT may be in use
on the COMPANY-B side. (NAT is not being used on the COMPANY-A side.)
The players:(Note: first three octets have been changed for security reasons)
COMPANY-A computer 1.2.3.161
COMPANY-A router 1.2.3.8 (also IPsec peer)
COMPANY-A has 1.2.3.0/24 with no subnetting.
COMPANY-B router 4.5.6.228 (also IPsec peer)
COMPANY-B computer #1 4.5.7.94 (this one has no issues)
COMPANY-B computer #2 4.5.7.29 (this one fails)
COMPANY-B has 4.5.6.0/23 subnetted in various ways.
COMPANY-B also has 9.10.11.0/24, but it is not involved in the issue.
What works:
The COMPANY-A computer 1.2.3.161 can communicate via the single IPsec
tunnel to COMPANY-B computer #1 4.5.7.94 without problems.
The "show crypto session detail" command shows Inbound/Outbound packets
flowing in the dec'ed and enc'ed positions.
What doesn't:
When the COMPANY-A computer 1.2.3.161 attempts to communicate
via the single IPsec tunnel with the COMPANY-B computer #2 4.5.7.29,
the COMPANY-A router eventually reports five of these messages:
Oct 9 15:24:54.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:24:57.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:03.327: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:15.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:25:39.329: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
Oct 9 15:26:27.328: IPSEC(epa_des_crypt): decrypted packet failed SA identity check
and the "show crypto session detail" shows inbound packets being dropped.
The COMPANY-A computer that opens the TCP connection never gets past the
SYN_SENT phase of the TCP connection whan trying to communicate with the
COMPANY-B computer #2, and the repeated error messages are the retries of
the SYN packet.
On the COMPANY-A side, this IPsec configuration has been set up on a 3745,
a 3725, and some 76xx routers were tried, all with similar behavior,
with packets from one far-end computer passing fine, and packets from
another far-end computer in the same netblock passing through the same
IPsec tunnel failing with the "failed SA identity" error.
The COMPANY-A computer directs all packets headed to COMPANY-B via the
COMPANY-A router at 1.2.3.8 with this set of route settings:
netstat -r -n
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
4.5.7.0 1.2.3.8 255.255.255.0 UG 0 0 0 eth3
1.2.3.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
10.1.0.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3
10.0.0.0 10.1.1.1 255.0.0.0 UG 0 0 0 eth0
0.0.0.0 1.2.3.1 0.0.0.0 UG 0 0 0 eth3
The first route line shown is selected for access to both COMPANY-B computers.
The COMPANY-A router (IPsec tunnel endpoint, 1.2.3.8) has this
configuration:
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
lifetime 28800
crypto isakmp key XXXXXXXXXXXXXXXXXXXXXXX address 4.5.6.228
crypto ipsec security-association lifetime seconds 86400
crypto ipsec transform-set COMPANY-B01 esp-3des esp-sha-hmac
crypto map COMPANY-BMAP1 10 ipsec-isakmp
description COMPANY-B VPN
set peer 4.5.6.228
set transform-set COMPANY-B01
set pfs group2
match address 190
interface FastEthernet0/0
ip address 1.2.3.8 255.255.255.0
no ip redirects
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
crypto map COMPANY-BMAP1
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 1.2.3.1
ip route 10.0.0.0 255.0.0.0 10.1.1.1
ip route 1.2.3.8.0 255.255.255.0 FastEthernet0/0
access-list 190 permit ip host 1.2.3.161 4.5.7.0 0.0.0.255
access-list 190 permit ip host 1.2.3.161 9.10.11.0 0.0.0.255
bridge 1 protocol ieee
One of the routers tried had this IOS/hardware configuration:
Cisco IOS Software, 3700 Software (C3725-ADVIPSERVICESK9-M), Version 12.4(25c),
RELEASE SOFTWARE (fc2)
isco 3725 (R7000) processor (revision 0.1) with 115712K/15360K bytes of memory.
Processor board ID XXXXXXXXXXXXXXX
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
4 ATM interfaces
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of NVRAM.
31296K bytes of ATA System CompactFlash (Read/Write)
250368K bytes of ATA Slot0 CompactFlash (Read/Write)
Configuration register is 0x2102
#show crypto sess
Crypto session current status
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
Active SAs: 0, origin: crypto map
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 4.5.6.228
Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
Capabilities:(none) connid:1 lifetime:06:26:27
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 651 drop 16 life (KB/Sec) 4496182/23178
Outbound: #pkts enc'ed 574 drop 2 life (KB/Sec) 4496279/23178
IPSEC FLOW: permit ip host 1.2.3.161 9.10.11.0/255.255.255.0
Active SAs: 0, origin: crypto map
Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
The COMPANY-B device on their end of the IPsec VPN is a Juniper SSG1000
Version 6.1 (ScreenOS)
We only have a limited view into the Juniper device configuration.
What we were allowed to see was:
COMPANY-B-ROUTER(M)-> sh config | incl COMPANY-A
set address "Untrust" "oss-COMPANY-A-1.2.3.161" 1.2.3.161 255.255.255.255
set ike gateway "COMPANY-A-1-GW" address 1.2.3.8 Main outgoing-interface "ethernet2/1" preshare xxxxxxxxxxxxxxxxxxxxxx proposal "pre-g2-3des-sha"
set vpn "COMPANY-A-1-IKE" gateway "COMPANY-A-1-GW" no-replay tunnel idletime 0 proposal "g2-esp-3des-sha-28800"
set policy id 2539 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "9.10.11.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2500
set policy id 2500 from "Trust" to "Untrust" "9.10.11.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309a pair-policy 2539
set policy id 2541 from "Trust" to "Untrust" "4.5.7.0-24" "oss-COMPANY-A-1.2.3.161" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2540
set policy id 2540 from "Untrust" to "Trust" "oss-COMPANY-A-1.2.3.161" "4.5.7.0-24" "ANY" tunnel vpn "COMPANY-A-1-IKE" id 0x309b pair-policy 2541
COMPANY-B-ROUTER(M)->
I suspect that this curious issue is due to a configuration setting on the
Juniper device, but neither party has seen this error before. COMPANY-B
operates thousands of IPsec VPNs and they report that this is a new error
for them too. The behavior that allows traffic from one IP address to
work and traffic from another to end up getting this error is also unique.
As only the Cisco side emits any error message at all, this is the only
clue we have as to what is going on, even if this isn't actually an IOS
problem.
What we are looking for is a description of exactly what the Cisco
IOS error message:
IPSEC(epa_des_crypt): decrypted packet failed SA identity check
is complaining about, and if there are any known causes of the behavior
described that occur when running IPsec between Cisco IOS and a Juniper
SSG device. Google reports many other incidents of the same error
message (but not the "I like that IP address but hate this one" behavior),
and not just with a Juniper device on the COMPANY-B end, but for those cases,
not one was found where the solution was described.
It is hoped that with a better explanation of the error message
and any known issues with Juniper configuration settings causing
this error, we can have COMPANY-B make adjustments to their device.
Or, if there is a setting change needed on the COMPANY-A router,
that can also be implemented.
Thanks in advance for your time in reading this, and any ideas.Hello Harish,
It is believed that:
COMPANY-B computer #1 4.5.7.94 (this one has no issues)
COMPANY-B computer #2 4.5.7.29 (this one fails)
both have at least two network interfaces, one with a public IP address
(which we are supposedly conversing with) and one with a RFC 1918 type
address. COMPANY-B is reluctant to disclose details of their network or
servers setup, so this is not 100% certain.
Because of that uncertainty, it occurred to me that perhaps COMPANY-B
computer #2 might be incorrectly routing via the RFC 1918 interface.
In theory, such packets should have been blocked by the access-list on both
COMPANY-A router, and should not have even made it into the IPsec VPN
if the Juniper access settings work as it appears they should. So I turned up
debugging on COMPANY-A router so that I could see the encrypted and
decrypted packet hex dumps.
I then hand-disassembled the decoded ACK packet IP header received just
prior to the "decrypted packet failed SA check" error being emitted and
found the expected source and destination IP addresses (4.5.7.29 and 1.2.3.161),
in the unecapsulated packet. I also found the expected port numbers of the TCP
conversation that was trying to be established in the TCP header. So, it
looks like COMPANY-B computer #2 is emitting the packets out the right
interface.
The IP packet header of the encrypted packet showed the IP addresses of the
two routers at each terminus of the IPsec VPN, but since I don't know what triggers
the "SA check" error message or what it is complaining about, I don't know what
other clues to look for in the packet dumps.
As to your second question, "can you check whether both encapsulation and
decapsulation happening in 'show crypto ipsec sa'", the enc'ed/dec'ed
counters were both going up by the correct quantities. When communicating
with the uncooperative COMPANY-B computer #2, you would also see the
received Drop increment for each packet decrypted. When communicating
with the working COMPANY-B computer #1, the Drop counters would not
increment, and the enc'ed/dec'ed would both increment.
#show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 4.5.6.228
Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
Capabilities:(none) connid:1 lifetime:07:59:54
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 376 drop 5 life (KB/Sec) 4458308/28784
Outbound: #pkts enc'ed 401 drop 3 life (KB/Sec) 4458308/28784
Attempt a TCP communication to COMPANY-B computer #2...
show crypto sess det
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, X - IKE Extended Authentication
Interface: FastEthernet0/0
Session status: UP-ACTIVE
Peer: 4.5.6.228 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 4.5.6.228
Desc: (none)
IKE SA: local 1.2.3.8/500 remote 4.5.6.228/500 Active
Capabilities:(none) connid:1 lifetime:07:59:23
IPSEC FLOW: permit ip host 1.2.3.161 4.5.7.0/255.255.255.0
Active SAs: 2, origin: crypto map
Inbound: #pkts dec'ed 376 drop 6 life (KB/Sec) 4458307/28753
Outbound: #pkts enc'ed 402 drop 3 life (KB/Sec) 4458307/28753
Note Inbound "drop" changed from 5 to 6. (I didn't let it sit for all
the retries.)
#show crypto ipsec sa
interface: FastEthernet0/0
Crypto map tag: COMPANY-BMAP1, local addr 1.2.3.8
protected vrf: (none)
local ident (addr/mask/prot/port): (1.2.3.161/255.255.255.255/0/0)
remote ident (addr/mask/prot/port): (4.5.7.0/255.255.255.0/0/0)
current_peer 4.5.6.228 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 402, #pkts encrypt: 402, #pkts digest: 402
#pkts decaps: 376, #pkts decrypt: 376, #pkts verify: 376
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 3, #recv errors 6
local crypto endpt.: 1.2.3.8, remote crypto endpt.: 4.5.6.228
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
current outbound spi: 0xDF2CC59C(3744253340)
inbound esp sas:
spi: 0xD9D2EBBB(3654478779)
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 2004, flow_id: SW:4, crypto map: COMPANY-BMAP1
sa timing: remaining key lifetime (k/sec): (4458307/28600)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0xDF2CC59C(3744253340)
transform: esp-3des esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 2003, flow_id: SW:3, crypto map: COMPANY-BMAP1
sa timing: remaining key lifetime (k/sec): (4458307/28600)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:
The "send" errors appear to be related to the tunnel reverting to a
DOWN state after periods of inactivity, and you appear to get one
each time the tunnel has to be re-negotiated and returned to
an ACTIVE state. There is no relationship between Send errors
incrementing and working/non-working TCP conversations to the
two COMPANY-B servers.
Thanks for pondering this very odd behavior. -
When I try and create a new folder on an external hard drive or copy files I get this: The operation can’t be completed because an unexpected error occurred (error code -50)
WHY? What does this mean?Linc. Only one hard drive displays this -50 problem. It is plugged directly into the computer but even though the answer i got (the link) only referenced iTunes, I DID unplug the hard drive and REplug into another port ON THE COMPUTER and even though it still is sllow to open when i click on it, the other problem seems fixed. Does all this mean the hard drive or (new) enclosure is faulty? In your opinion?
-
What Presets for This Avi File?
I have a couple of .avi files of musical movies (from tv) that I would like to edit in Premiere (which I've virtually never used before, only some intermittent stuff with my little digital camera... no real knowledge ).
What I want to do is simply extract the singing and dancing from the storyline.
Windows tells me this much about the files:
624 x 352 pixels
bit rate 128kbps
audio sample size 16 bit
audio Lame MP3
video 23 frames per sec
data 1102kbps
video sample 24bit
XVID compression
and gspot gives me this, most of which I don't even understand:
container
avi v1 Interleave 1 vid frame (42ms)
Audio frames aligned on interleave
Video 304MB
User data
[ISFT] transcode-1.0.6
[USER] XviD0050
Audio
Codec: 0x0055 MPEG-1 Layer 3
Info 48000Hz 128kb/s tot, Join Stereo LAME 3.9
Video
Codec XVID Name XviD ISO MPEG-4
Len 44:23 Frms 63851 kbps 959 Qf 0.182
Pics/s 23.976 Frames/s 23.976
pic 624 x 352
sar 1.773 par 1.000 dar 1.773
Now those figures don't match any of Premiere's existing 'presets' and don't provide enough info for me to make up a custom preset.
Can anyone help me out? Tell me what presets to put in or direct me to software that will interrogate this file and get the preset info for me?
OR: if there's an easier way/software to do what i want to do - what is it?
regards,
abThe Xvid CODEC will be a real problem. For the rest, a Desktop Preset with the attributes customized to match, will get you to editing - just not with the Xvid CODEC. I would use Harm's advice to convert to DV-AVI Type II, and issues should go away.
With Harm's other suggestion, I have found that CyberLink's PowerDirector program does an OK job with Xvid/DivX material, but it IS heavily compressed and is a streaming media delivery format. It should ONLY be used as such, and not as source footage. Also, Premiere Elements will have the same issues, as will PrPro.
For some more background on CODEC's, this ARTICLE might prove useful.
Good luck,
Hunt -
"Prefer Adobe Camera Raw" - What exactly does this do?
What is the significance of the "Prefer Adobe Camera Raw for JPEG and TIFF"?
I ran into the following issue:
I update some of the fields in the IPTC metadata. In particular the title and keywords. I'm running Vista 64, and both changes faithfully appear when I view the file with Vista's picture browser or even in Windows Explorer. So far so good.
I'm then also uploading the pictures to a Menalto Gallery website. Here is when I run into trouble.
- If I have Prefer ACR checked of when I update the IPTC then the gallery website does not pick up on the metadata.
- If I have Prefer ACR checked off when I update the IPTC then the gallery website is able to pick up on the metadata and assign captions on the website accordingly.
So I'm trying to figure out what the difference between prefer ACR on and off is, and why this would affect reading of the metadata by a third party application.
Thanks!
CarlosAfter much digging, I've been able to come up with a rough answer to my own question.
It appears that when the "prefer ACR" setting is on, Bridge saves older versions of the Metadata (in the XMP IDF, I believe). When displaying a file's metadata, Bridge knows to only display the latest version.
It would appear that Windows Vista's built-in photo tools are also smart enough to only display the latest version of the metadata. Other tools (such as the Gallery software), however, appear to get confuse and display an older version of the metadata.
In short, the conclusion I've arrived at is: If you want higher compatibility across applications, turn OFF "prefer ACR". If you value versioning information then keep ON "prefer ACR". -
What exactly is this code doing?
Our prof gave us some sample code for converting Person objects into array information, and back again.
My question is about this method:
public Person[] convertToPersonObjects()
Person p[] = new Person[data.size()];
for(int i = 0; i < p.length; i++)
p[i] = new Person((String)((Vector)data.elementAt(i)).elementAt(0),
(String)((Vector)data.elementAt(i)).elementAt(1),
(String((Vector)data.elementAt(i)).elementAt(2),
(String)((Vector)data.elementAt(i)).elementAt(3),
(String)((Vector)data.elementAt(i)).elementAt(4));
return p;
}"data" is a vector that has been holding the five attributes of Person. What I'm not getting here is why he used this construction: ((Vector)data.elementAt(i)).elementAt(1)So is this casting the Vector value of the "data" vector element into a String that is then stored as element 1, 2, etc. of the Person object? Why would a vector element have to be cast into a Vector anyway? And I'm confused by the double use of "elementAt".
Help is much appreciated!((Vector)data.elementAt(i)).elementAt(1)Hi!, I think that your data Vector contains in every posotion another Vector with the elements of each person, so if the position i of Data has a Vector you should cast what elemenAt returns and then acces what you need to create a Person Object.
Search your source code for something like "data.add();" and see if it adds a Vector to data.
The cast to String is done because the elementAt method returns an Object
Hope it helps -
So what exactly is this iphone 5 rattlling noise?
Whenever i get a text message, my phone vibrates. After the vibration theres also this faint rattling noise that i hear. Like something loose inside my phone. You also hear it when you tap on the back or you place it down. Its annoying and makes the phone feel cheap.
I did have the same problem with the iphone 4 but that turned out to be camera autofocus? But this is an iphone 5. Plus, i'm also hearing stories of how the rattling is a loose battery?
I'm confused and don't know what's up with the iphone 5's. Rattling is annoying and just makes my apple product feel so cheap.Noise Problem cured !!!
My iPhone 5 made a rattling noise when shaken after it had "a few falls"
I read in one of the forums that it was the battery coming away from the adhesive.
I checked iFixit teardown of the iPhone 5 and noted the very large battery which occupies two thirds of the screen space from left to right (starting from above the headphone jack side).
I'm not surprised that if it comes loose that it is the cause of the clunking rattle.
One of the forums contributors suggested gradually pressing all the area of the phone on the outside that overlies the battery inside pressing hard between front and back over all of the screen area from left to right that fronts the battery inside. In this way one pushes the battery back on to the adhesive !!
It works perfectly - Problem cured !! - J B Walsh -
WHat would cause this error: File not found
Hi,
When I want to preview my page in the browser, I get a 'Not
Found' message: The requested URL /navius2006nl/www/cases.asp was
not found on this server.
What would cause that to happen. The browser displays pure
thml pages just fine.
Thanks for any help you might be able to offer.
Rogier
Rotterdam, The NetherlandsAre you using frames? Do you have a webserver installed? Have
you defined
your testing server?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"RogierBos" <[email protected]> wrote in
message
news:f5e866$jnm$[email protected]..
> Hi,
> When I want to preview my page in the browser, I get a
'Not Found'
> message:
> The requested URL /navius2006nl/www/cases.asp was not
found on this
> server.
>
> What would cause that to happen. The browser displays
pure thml pages just
> fine.
>
> Thanks for any help you might be able to offer.
>
> Rogier
> Rotterdam, The Netherlands
>
> -
What exactly is this ESA and how can I be a part of it
Hi,
Can you guide me to resources so that I can have an indepth understanding of this. I am a Portal developer, and how can I see my career path in this.
Regards,
HarishHi
Before you know about ESA, you should know the following things things .
<b>Enterprise:</b> this is Integration different branches of business. (eg integration SD,PP,MM etc into one )
<b>Service:</b> It is a new way of software solutions. we had function modules, Object oriented way such is Service.
In this concept we have two main objects:
Service Providers and Consumers.
<b>Web Service :</b> Web services are self contained and self describing application functionalities which can be processed through internet standards.
EG : Google
Product Availability check
Order Status check
Now you can Definitely understand what is ESA :
<b>SOA :</b> Sevice Oriented Architecture
<b>ESA</b>(Enterprice Service Architecture) :
Web Services which provide business Functionality
Have enterprise quality in scalability, robustness,security, manageability,supportability,
If you want to be familiar with ESA. you go for <b>MVC</b>(Model View Controller concept and Webdynpros) and then registering and deploying service is the last step it is very easy
Good Luck.
jaffer vali shaik -
What exactly is this Dirndl?
can explain a little more this
--snip--
any dev are testing it ?
is this the end of gcc ?
-- mod edit: no blog plugging please, see the original article karol linked below
Last edited by litemotiv (2011-06-10 19:50:48)Well, it seems it's one of two things: 1) the EKOPath compiler suite from Pathscale 2) A gpugp compiler which Pathscale has talked about earlier which they claim will wipe the floor with cuda/opencl in terms of not needing to (manually?) change your source code in order for it to efficiently utilize cpu+gpu.
End of GCC? What? GCC unlike Pathscale (AMD/intel 64/32) products supports a TON of cpu architectures. Then we have other things like the issue of compability with GCC, it's one thing to say you are compatible with GCC and actually be able to build GCC targeted code (99.99% of open source), prime examples Intel Compiler/Clang/LLVM which struggle despite being 'compatible'. Also the current benchmark testbed is awfully small to say the least.
Either way, I love competition in the compiler arena, and if this can deliver the potential displayed by these few tests on alot more code then it can be an awesome addition to the open source compiler lineup.
falconindy: there's a trailing 'v' on the url you provided which makes it go to the frontpage of the blog rather than to the blog post
Last edited by Grinch (2011-06-11 00:20:12)
Maybe you are looking for
-
After 10.9.2 Update computer keeps restarting
I updated on to 10.9.2 on 3/3/14 on 3/4/14 I started getting messages that the system will reboot in 1 minute. This has happened serveral times since then including this morning. I have reviewed the logs but I am not as skilled in Mac diagnostics as
-
Photoshop Elements 9 - Setup Error
If anyone could assist me, it would be greatly appreciated. I am attempting to reinstall my Photoshop Elements 9 software that came with my Bamboo Create Pen and Touch drawing tablet. I have already contacted customer support in a chat session and th
-
INGRES 6.4 ESQL/Fortran to Pro*Fortran
Is there any tool kit to convert Embedded SQL fortran programs of Ingres to Oracls Pro Frotran. Thank Raja null
-
Missing Premier Elements 10 .exe file on Adobe site
I am reinstalling Premier Elements 10 on a new PC and the .exe file appears to be missing on the Adobe download page. Any ideas on how to install would be great! Regards, Chris
-
Bad Problem Audigy 2 ZS and OBLIV
Hey Guys! My Problem is that if I have my Soundblaster Audigy 2 ZS plugged in, Open AL and Drivers up to date, pci bus voltage and latency correct and I load a savegame in Oblivion the System Crashes everytime after 5-0 sec. There is a loud Beeep com