What extension do I need for my clear display?

Hi Guys,
I am a little confused. I have a "clear acrylic" display with some usb ports on the back, which came with my G5. I am still getting heavy use from the computer but need to move the base unit further away from me behind some acoustic screens since the computer noise is entering my audio recordings.
I therefore need an extension for the monitor. What do I need - a female to female DVI cable?
I have seen DVI to ADC boxes but don't really understand what I would need this for.
The length would be about 3-5 mtrs.
Would love some help.
Thanks
Iwan

If the display uses ADC (Apple Display Connector rounded ends, squeeze clips)
<http://www.getprice.com.au/ADC-Extension-Gpnc_41--13367239.htm>
<http://www.epowermac.com.au/shop/pc/Dr-Bott-3m-ADC-Extension-display-cable-670p 366.htm> (Note the picture shows a DVI extension cable. Be sure to get the ADC version.)

Similar Messages

  • What technical components are needed for integration of SAP BI and BO?

    Hello,
    What technical components are needed for integration of SAP BI and BO?

    Hi,
    you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
    In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
    Please take again a look at the following link for more detailed information (from Ingo) on this:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
    Regards,
    Stratos

  • What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2

    What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    All you need is an Ethernet cable.
    Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

  • What adapter do i need for my macbook pro for a presentation

    what adapter do i need for my macbook pro for a presentation

    What model/Year MBP do you have and what are you connecting it to?
    Ciao.

  • What cables do I need for Apple TV streaming from my iPad to my tv

    What cables do I need for Apple TV, streaming fom my iPad to a HD tv?

    if you have an Apple TV it's don over wifi as in wireless so no cable would be required apart from the hdmi cable the Apple TV connects to the tv with

  • What charger do I need for my 2008 macbook pro 15"

    what charger do I need for my 2008 macbook pro 15"?

    This one:
    http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
    Ciao.

  • What app do i need for my phone printer officejet pro 8500a

    what app do i need for my phone printer officejet pro 8500a

    Hi tiys,
    If you have a Android phone you can download HP home and biz app from the andriod market.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • What app do i need for my epson 600 printer to work with my ipad

    what app do i need for my epson 600 printer to work with my ipad

    Hi,
    You are asking at a wrong forum, anyway firstly please check to see is your printer in this list ? 
    http://support.apple.com/kb/ht4356
    If Yes, please follow this checklist and fix:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If No, check with Epson
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have Safari 3.2.3.  What version do I need for Mac OS X 10.6.8?

    I have Safari 3.2.3.  What version do I need for Mac OS X 10.6.8?

    Go here for a much more up-to-date Safari: http://support.apple.com/kb/DL1569

  • What program do i need for making dvds I can play in a dvd player

    what program do i need for making dvds that i can play in a dvd player?

    iDVD.
    Apple no longer sells it. Buy any version of iLife from your favourite software vendor. iLife 11, 09, and 08 all contain the same version of iDVD.
    When you get the disc install only iDVD, then update it here:
    iDVD 7.1.2
    http://support.apple.com/kb/DL1414

  • Anybody know what power adapter I need for a trip to Vietnam?  iPhone/iPad.

    Anybody know what power adapter I need for a trip to Vietnam?  iPhone/iPad.

    The Apple power supplies work at from115 to 240 volts. The only adpator you need is the little plug that converts our flat pins to the ones use in Vietnam. The last time I needs one for my trip to Israel I went to Ace Hardware and they help me find exactly what I needed.
    Allan

  • What are the files needed for downloading the MSS -BusinessPackage

    Dear Gurus,
    Any body can give me a suggestion for downloading the MSS -BusinessPackage ,and also what are the files needed for the deployment -its in a urgent basis and reward points welcome!
    regards,
    S.Rajeshkumar

    Hi Rajesh,
    You have to download and deploy the following through SDM (for NW04s/EP7),
    1. Business Package for MSS (contains roles,worksets for your Business Package)
    2. PCUI_GP (WebDynpro Component)
    3. SAP_MSS (WebDynpro Coponent - your MSS application files)
    To use ESS and MSS in Conjunction, you also have to deploy Business Package for Common Parts.
    Backend SAP systems should have SAP HR and SAP FIN configured.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm</a>
    Thanks,
    Vamshi

  • I can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

    i can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

    I don't play any Facbook games, but I'm assuming that they are played using your browser (Safari, Firefox, etc.).
    Clinton

  • I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s

Maybe you are looking for

  • XP Mode can't access parallel printer connected with USB to DB-25 adapter

    After some arduous work I finally got XP Mode to run on Windows 7 Virtual PC on my Win 7 Pro 64-bit machine. I have an HP LJ 4000 printer that has a Centronics interface with a DB-25 plug. I used a USB to DB-25 adapter advertised as IEEE 1284-complia

  • Windows Defender Not Working

    I've got a Toshiba T107-110 running Windows 7. After a Windows update today i got messages that Windowd Defender had a problem loading so i tried running it from the control panel. I then got a message 'Application Not Found'. I checked the applicati

  • SWF movie not loading properly.

    I decided to use a loader method for a flash project. When I load swf files from a folder on my computer into my main movie, it loads just fine. However, when I try to load the same exact swf files from a remote server, the script fails on me giving

  • Planning without considering inventory of finished goods.

    Hi My users for asking for this, which don't make much sense to me, but I am a beginner in PP module. We are implementing MRP now. They want to input actual Production quantity in MD61 as PIR for the finished good and want MRP to generate Planned ord

  • GetUsageData is always returning Null

    Let me first start out by stating that I know there are many questions on this issue, and I have read them all. However, none of the suggestions that I have read have seemed to help my situation. Therefore, I figure I would supply my code with the ho