What external mic works with QuickTime Audio Recording?

I am recording lectures at a distance and need a quality mic that works with QuickTime Audio Recording.
Any suggestions?
PowerBook G4 1.25   Mac OS X (10.4.8)  
PowerBook   Mac OS X (10.4.8)  

To Apple Discussions!
Check out the Microphones @ Samson.
Also, check out to see what Apple has to offer by clicking the Store tab at the top of this site.

Similar Messages

  • Bug report: Quicktime Audio recording with multichannel interfaces

    I have problems recording audio in Quicktime using a multichannel audio interface. I tried two firewire interfaces, an Apogee Ensemble and the RME Fireface. Both are supported by core audio and work as expected with any audio sequencer such as Garage band, Logic, Studio One etc. However, both show the same strange behavior in Quicktime 10.2 and as well in iMovie and FCPx:
    First, i selected interface channels 1 / 2 in the audio-midi-settings window as the stereo input source. In the quicktime audio recording window, I select the audio interface (fireface or ensemble) as the audio source. I expected that the recorded audio would be stereo. However, regardless of these settings, the recording is always mono. Actually quicktime records only channel 1 and ignores all other channels. This might be a bug in Quicktime with regard to the handling of multichannel interfaces. The same bug occurs in Final Cut Pro X and iMovie, which seem to use the same audio engine as Quicktime. However, Garage band and Logic do not show the problem.
    It does also not seem to occur with simple stereo interfaces. I tried a Logitech C920 webcam with a built-in stereo microphone and a Zoom Q2HD recorder used in stereo USB microphone mode. In both cases, the recordings in FCPx are 2 channel stereo as it should be. Thus the problem is specific for multichannel interfaces.
    Can anybody reproduce or explain this behaviour?
    I am using OS X Mountain Lion (10.8.2), MacBook Pro 15 Retina 2.3 GHz.
    Regards, Werner

    It seems that apple has reacted to this bug report without notice. Recently I tried it once more with quicktime and an apogee ensemble interface. Surprisingly, the problem did not occur anymore. I have not tested it with iMovie and FCPX yet.
    The sad side of Apples support strategy is that I spent time and money searching for a workaround without knowing that Apple had removed the bug in the meantime.

  • What external drives work well with a late 2011 MacBook Pro?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also should I avail myself of something that works with Thunderbolt or Firewire?

    What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices?  I ask because I just found out the hard way that a Samsung EVO 840 does not.  Also, should I avail myself of something that works with the Thunderbolt or Firewire connections?  I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

    Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
    http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
    There does seem to be a lot of prep to make it work:
    "1. Preparation to install your new shiny SSD
    1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
    1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
    1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
    Also in those reviews:
    " Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
    Personally I only deal with OWC:
    http://eshop.macsales.com/shop/SSD/OWC/
    They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
    Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
    When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
    As far as value for price:
    http://eshop.macsales.com/item/OWC/MES3FH7500G/
    500 GB for $130.
    However as far as reliability is concerned:
    http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
    http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
    So sudden power loss is an issue with SSDs.
    Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

  • As there is no audio input on the new iMac range, What external equipment will allow me to record onto my iMac ?

    As there is no audio input port on the new imac range, what external epuipment can i use to record dj podcasts from a pioneer DJM 700 mixer?

    I'd be inclined to use something like the Numark Stereo I/O. If you're currently using the line-in on an iMac then you will see a drastic improvement.
    http://www.numark.com/product/stereoio
    That said, you can spend as much or as little as your wallet will allow on a USB input device, more investment brings better quality ADCs, higher bit rates, lower latency and more inputs.

  • Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

    Internal Microphone not working with Quicktime and some other apps, yet it does for Skype. 
    Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
    Any suggestions, please?

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • What's the deal with Quicktime?

    What's the deal with Quicktime? In the past, there was just plain Quicktime. Then it was separated into two different versions: Standard and Pro. I bought the Pro version for my eMac. Then, when I moved to my 24" iMac, Quicktime was made into just one version again, and the features were rolled into it. Now that I have my 27" iMac running Lion, I find that a bunch of the menu items are greyed out and have the word "Pro" next to them. Also, I'm finding that it can't open many standard files, such as .MOV files that run fine on my older Mac, because "a required codec is not available." What's going on?

    There are two versions of QuickTime Player available for Snow Leopard and Lion systems. The QuickTime Player X included with those versions of Mac OS X have some of the features previously only available with a Pro key to unlock QuickTime Player 7.
    QuickTime Player 7 is an optional installation on SL and Lion, and apparently you installed it or it carried over across an update. If you wish the Pro features activated, you need to enter in your Pro key just as you did previously (you will need a key for QuickTime 7; an older key will not work). Then the Pro features will be available again, though support for some old codecs is no longer available. For more information, see:
    http://support.apple.com/kb/HT3678
    Regards.

  • Working with QuickTime on the Web

    Here is my web site that I need help with.
    <http://www.greydogmac.com/football/gamepages.htm>
    I am a just learning about putting QuickTime on the web.
    Everything works fine on my G4. In an attempt to keep all of my clips on one page, I used code to open the video on the computer's QT application, not the QT plugin. Now those clips will not open on my school's PCs.The movies are self contained.
    I used code suggested by David Egbert and the book, QuickTime for the Web.
    I think part of the problem is the school's version of QT is 5.0, and I'm using 7.0.3.
    Is there a "common denominator" for successful size and format for putting QT on he web?
    Any suggestions?
    Hank Kearns

    what's the best video program to do when displaying movies on the web? I'm working with quicktime and most seem to have it. Or do they? What video program is the least likely to create problems with users?
    Flash. If you're exporting Quicktime files you can export as h.264 that will play in Flash Player 9+
    Use the JW player to play h.264 files in a flash player.

  • What larger monitors work with the 15" vga G4 iMac

    What larger monitors work with the 15" vga G4 iMac?

    It is not so much how large but rather a question of resolution and how it would look on a larger monitor than the original.
    All iMac G4 15-inchers supported: 640x480; 800x600; and 1024x768 at a fixed 4:3 ratio--no provision for widescreen. The old rule of thumb for decent clarity for 4:3 ratio CRT monitors was:
    15-inch monitor supports 640x480
    17-inch supports 800-x600
    19 to 20 inch supports 1024x768
    I believe you would find the same issues with an older 4:3 flat-panel monitor.
    Also the iMacs can only mirror the resolution set on the built-in monitor so you can't have the external one set differently nor use it for extended desktop. If you set the built-in to 640x480 (would look nice at 15 inches) you are going to get 640x480 on the external regardless of how big it is. On a 19-20 incher, 640x480 could start to look pixelated.

  • Remote Not Working With QuickTime 7.3.0

    Hi I just upgraded and realized my frontrow remote has stopped working with Quicktime. The remote works with VLC, iTunes etc but not QT. Forget about scanning forward or backward it cant even adjust the volume. I never had the problem before. I have tried playing both avi and mp4 files.
    I run Tiger and have a macbook

    As a follow up -
    I spoke with Apple Support about this and was routed to a few people who were helpful, and moved it up to the engineers of Keynote (and the white remote?) for a solution.
    A few days later I received this reply:
    Hello Eric, I have heard back from the engineers about this. It looks like as long as Keynote 6.0 is present on the system it will default to using the remove in that application. If you remove Keynote 6.0, which we would not recommend, then you can use Keynote 5.3 with the remote. Presently though this is normal and expected behavior.
    I replied by expressing my disappointment that this wasn't functional, since I'm not comfortable using Keynote 6.0 yet.  Short of uninstalling 6.0, the only workaround I have found is to use the iPhone/iTouch Keynote remote app, or make a duplicate copy of your presentation to be opened in 6.0 (and using the remote there).

  • What Monitors WILL work with the Mac-Mini?

    If the new Mac-Mini does not put out analog video and Apple does not state this, what monitors will work with it?

    I was able to get an Apple Studio Display to work via the adapter in the Mac Mini box combined with that huge DVI to ADC adapter they had sold me years ago. In the Apple Store I really had to press them to assure me my display would work as they told me they'd charge me a re-stock fee if I had to bring the Mini back. I pressed the point that Apple should know if a monitor it made works with a computer it made. The rep asked around and we both searched the web and then she was able to confirm it would work. They really need a list of acceptable monitors. If anyone locates such a list, please let us all know!

  • My external monitor worked with my MacBook Pro before I took it on a little trip, now it won't work.  Any suggestions?

    My external monitor worked with my MacBook Pro before I took it on a little trip, now it won't work.  Any suggestions?

    Never mind.  Sorry.  It fixed itself.

  • I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Question
    I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
    ::Worked for me::

  • What NAS will work with Lion

    Anyone know what NAS will work with Lion?  DocFred answered my previous post saying with my LG Nas that there no updates coming soon lol.  So there is no way to map a network drive?
    I took the leap into Apple ........... and I can't do a simple thing as mapping.  PC's can map :>

    Office 2011.
    Also OpenOffice and LibreOffice and NeoOffice can and cost less.

  • What monitor best works with the MAC Pro

    I'm thinking of buying a MAC PRO. What Monitor best works with a MAC Pro?

    Whatever Monitor you like, exclusively. There are adapters available for everything.
    Analog VGA is not a good idea. It's a Digital world. But it can be done if you want.
    A TV set is not a Monitor. TV sets are for moving pictures, and may do badly with stable pictures, fine lines, parallel lines, smooth-edged text, and adjacent patches of bright colors.
    Wider than 1920 needs special attention to details.

  • What speakers will work with iPod shuffle 2G, what speakers will work with iPod shuffle 2G

    What speakers will work with iPod shuffle?

    Any speakers that are self-powered (has its own power supply), and connect using standard 1/8-inch "mini-sterio" jack (the same connector on regular headphones).

Maybe you are looking for

  • Do I need a new airport or antennae or booster? advice please

    I have an old airport graphite base station in my house. I want to send the signal to an outbuilding with no phone socket, to be picked up by my old titanium powerbook with an airport card, a Mac G4, and a PC, both of which will also need wireless ca

  • Alert management mail with attachment

    I have to send an email from a custommer application, what I realize by a new alert category in tr. ALRTCATDEF. I trigger an email using F.M. SALRT_CREATE_API. However, I have to send an email with an attachment. Is there any possibility to add an at

  • WebDynpro ABAP ALV table not refreshed

    Hi everyone, I've got a master table which displays a list of items. On lead selection a query is executed and the result is displayed in a table below the first table (like a master-detail pattern). This all works all right when the detail view is a

  • Where is the restore button on itunes

    where is the restore button on itunes

  • Can't run classic on os 10.4.2

    I have os 10.4.2 and would like to run os 9 classic to play old games. But I can't activate classic - system says there's no folder. I have downloaded countless updates and tried to install but they won't install on my hard drive. I have also formatt