What extractors or data source do i have to activate to load the TR COOIS

Hi all,
i need to do a report where i must load all the data that the TR COOIS execute in R3, i would like to know what extractor, data source, etc i need to activate to load this data to BW, what advices or what i need to do, please help

Hi,
COOIS/CO27 -- is about Production Order Information System.
http://help.sap.com/saphelp_nw70/helpdata/EN/a1/2d708759fc49ec90f309888b0bdb48/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/72/91a139cc3a5c53e10000000a11402f/frameset.htm
Regards
CSM Reddy

Similar Messages

Creation of a generic extractor and data source for the FAGLFLEXA table

Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, Vishal

Hi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu

What exactly a data source is

What exactly a data source is? Is flat file a data source (while extracting from flat file)?

Hi Ganesh,
A datasource is a group of fields whose data can be extracted to BW. Flat file is actually a source system.
See here:
http://help.sap.com/saphelp_nw04/helpdata/en/8a/3045381d10f327e10000009b38f8cf/content.htm
Hope this helps...

Hey, someone stole my iphone and it had a screen lock on it! when they crack it will they see all my data or do u have to reset to crack the phone? that means they won't be able to view any of my data?

hey, someone stole my iphone and it had a screen lock on it! i know they can crack it but when they crack it will they see all my data or do u have to reset to crack the phone? so they can't see my data then? I would really appreciate if someone could help me with this!

What To Do If Your iDevice Is Lost Or Stolen
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
How To Set Up Free Find Your iPhone (Even on Unsupported Devices

Optical drive on iMac at work, barely one year old, won't read CD's....disc utilities shows disc unavailable! Rarely used and out of warranty, what a rip off!! I have been on MACS since the 80's and things are getting more and more difficult

Optical drive on iMac at work, barely one year old, won't read CD's....disc utilities shows disc unavailable! Rarely used and out of warranty, what a rip off!! I have been on MACS since the 80's and things are getting more and more difficult to deal with. Why did it quit after barely being used? Any help from Apple?

It depends on what you mean by "barely one year old". If the iMac is only a couple of days out of warranty, Apple's been known to make exceptions and extend the warranty, though it's by no means guaranteed. If it's several days or more out of warranty, then Apple will fix it, if it's a hardware problem, but the repair won't be free. This is no different now then it would have been with a Mac purchased back in the 80s.
Why the drive failed, if indeed it has, is impossible to say. Could have been a static shock, a weak component that failed when power was applied, or a mechanical fault in one of the tiny parts used in optical drives and hard drives that finally broke.
Regards.

What is an smpt password? I have problems sending photos using the stamp at the bottom because it asks for some smpt password and I have no clue to find out what it is, how to set one of find one if I somehow put one in and don't know what it it.

what is an smpt password? I have problems sending photos using the stamp at the bottom because it asks for some smpt password and I have no clue to find out what it is, how to set one of find one if I somehow put one in and don't know what it it.

It's the password for your outgoing mail in your Mail account. You need to set it up in your Preferences.
Regards
TD

I have a problem with loading the PNG image

I have a problem with loading the PNG image from site. For ex. go to icefilms com and is starts to load png like crazy CPU is huge and you can not shut down Firefox at least a minute. This is not just in this site but whit any one whit lots of pictures.
Image from firefox: Picture [http://img836.imageshack.us/img836/9910/7312011103147pm.jpg 1] [http://img28.imageshack.us/img28/8505/7312011103249pm.jpg 2] [http://img706.imageshack.us/img706/5615/7312011103348pm.jpg 3 ][http://img827.imageshack.us/img827/8483/7312011103533pm.jpg 4]
This is my Task Manager [http://img217.imageshack.us/img217/5715/7312011103621pm.jpg 1]
- I try safe mode, same thing
-All addons and plugins are ok
Any idea why is this so big problem.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

What is a data source in BW?

Can anyone explain me what exactly is a data source and how is it used?
Thanks,
bw fresher

A DataSource is not only a structure in which source system fields are logically grouped together, but also an object that contains ETTL-related information.
Four types of DataSources exist:
DataSources for transaction data·
DataSources for characteristic attributes·
DataSources for characteristic texts·
DataSources for characteristic hierarchies
In a source system data source are assigned to particular data appliction componenet.From the business content it is in the form of deliverd (D)version you have covert into Active (A)version.

What is Attr data source name for SOLD,BILL and SHIP TO PARTY

Hi all,
I want master data source names for these SOLD,BILL and SHIP TO PARTY.
Bill to party,Ship to party and Sold to party Master data source names.
Plz give me Some help on this.
i want solution very urgently.
Thanks,
Guna.

Dear Gunasekhar,
There are no separate datasource for 0sold to, 0ship to and 0bill to parties.
They are referrenced to 0CUSTOMER in BW. and the datasources for 0customer are 0CUSTOMER_ATTR and 0CUSTOMER_TEXT.
Assign points if useful
Regards
Venkata Devaraj!!!

The data source "....." referenced in the form template is not valid or cannot be found

Greetings,
I have an InfoPath 2013 form that uses an external data connection. The data connection became corrupt (somehow, no one knows who changed what). A user went in to InfoPath designer and created a new data connection and changed all references
to use that new data connection. Now the form cannot be published at all with the error
"The data source "GetUserProfileByName" referenced in the form template is not valid or cannot be found"
The new data source they created is GetUserProfileByName2 and changed all references.
Of course, since it is broke, they asked me to see if I can find the issue. I went through the form looking to see if they missed any references to the old data connection and can't find anything.
Where is InfoPath storing the old data connection information and where can I remote it? I looked in the manifest and don't see it there either.
Any thoughts?
Thank you!

Hi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Using sql bulk copy throwing exception -The given value of type String from the data source cannot be converted to type int of the specified target column

Hi All,
I am reading notepads files and inserting data in sql tables from the notepad-
while performing sql bulk copy on this line it throws exception - "bulkcopy.WriteToServer(dt); -"data type related(mentioned in subject )".
Please go through my logic and tell me what to change to avoid this error -
public void Main()
Dts.TaskResult = (int)ScriptResults.Success;
string[] filePaths = Directory.GetFiles(@"C:\Users\jainruc\Desktop\Sudhanshu\master_db\Archive\test\content_insert\");
for (int k = 0; k < filePaths.Length; k++)
string[] lines = System.IO.File.ReadAllLines(filePaths[k]);
//table name needs to extract after = sign
string[] pathArr = filePaths[0].Split('\\');
string tablename = pathArr[9].Split('.')[0];
DataTable dt = new DataTable(tablename);
|
string[] arrColumns = lines[1].Split(new char[] { '|' });
foreach (string col in arrColumns)
dt.Columns.Add(col);
for (int i = 2; i < lines.Length; i++)
string[] columnsvals = lines[i].Split(new char[] { '|' });
DataRow dr = dt.NewRow();
for (int j = 0; j < columnsvals.Length; j++)
//Console.Write(columnsvals[j]);
if (string.IsNullOrEmpty(columnsvals[j]))
dr[j] = DBNull.Value;
else
dr[j] = columnsvals[j];
dt.Rows.Add(dr);
SqlConnection conn = new SqlConnection();
conn.ConnectionString = "Data Source=UI3DATS009X;" + "Initial Catalog=BHI_CSP_DB;" + "User Id=sa;" + "Password=3pp$erv1ce$4";
conn.Open();
SqlBulkCopy bulkcopy = new SqlBulkCopy(conn);
bulkcopy.DestinationTableName = dt.TableName;
bulkcopy.WriteToServer(dt);
conn.Close();
Issue 1:-
I am reading notepad: getting all column and values in my data table now while inserting for date and time or integer field i need to do explicit conversion how to write for specific column before bulkcopy.WriteToServer(dt);
Issue 2:- Notepad does not contains all columns nor in specific sequence in that case i can add few column ehich i am doing now but the issue is now data table will add my columns + notepad columns and while inserting how to assign in perticular colums?
sudhanshu sharma Do good and cast it into river :)

Hi,
I think you'll have to do an explicit column mapping if they are not in exact sequence in both source and destination.
Have a look at this link:
https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlbulkcopycolumnmapping(v=vs.110).aspx
Good Luck!
Kaur.
Please mark as answer if this resolves your issue.

I updated Fox fire and I have lost the add on auto dial .. I have tried to redown load the add on and it does not appear on my menu bar..

I had the add on auto dial then there was a Firefox upgrade and auto dial disappeared from my menu bar. I have tired to redown load auto dial. It says that it will be added when I restart Firefox. I restart in auto dial does not reappear.

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

Working with FI and HR extractors and data sources.

Hi all,
How are you guys? Pls help me to understand the working knowledge of FI and HR extractors. I dont have any financial knowledge and without the business knowledge of FI and HR how can i handle the scenarios. I am going thru the sap help documentation but having a tough time to visuvalize that. Any kind help in this regard will be appreciated.Pls help me to understand the terminology in finance sector.
Mail any docs to [email protected]
Wish you all good luck.
Prathibha Eluri

You can do some research on the help.sap.com
http://help.sap.com/saphelp_bw33/helpdata/en/c7/565f3ce4dd3370e10000000a114084/content.htm
to find what are the fields has been used in a particular datasource fields and if your BW system is already been installed and activated most of the InfoObjects you can check those relevent InfoObjects in tcode: se11 and give the table
name RSOSFIELDMAP and enter the datasource name it will give you the one to one mapping.
If you don't have this scenarios you need to look in RSA1 and RSD1 to find the appropriate InfoObjects for the particular fields just make sure the field types and length match with the InfoObjects otherwise.
Hope this helps.
Please assign the points if any helps.
BK

I edited my web site. Now in Firefox I see the HTML language, in IE and Safari I see the website. What do I need to do to have all 3 browsers show the website

I updated my website by doing some basic editing. Upon completion of the editing I checked out the website on IE and Safari and Firefox to make sure the changes looked the way I wanted them. On IE and Safari everything was fine, however, on Firefox the browser did not show my website it showed the basic HTML document. I am thinking there must be some code that Firefox got hung up on, but I have no idea how to figure out what firefox does not like and still keep the other browsers happy.

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

What extractors or data source do i have to activate to load the TR COOIS

Similar Messages

Maybe you are looking for