What features of iOS 6 will not work with iPhone 4s?

What features of iOS 6 will not work with the iPhone 4s? There are over 200 added features, but what will be missing on a 4s that you will get with a 5?

All of the features will work, however, some features wont work depending on what country you live in. If you life in America, canada or the UK you dont have to worry about anything

Similar Messages

IOS 8.2 will not work with IPhone 5S

my iPhone 5s had a prompt to update to IOS 8.2, and when I did my phone stopped working! Now the apple symbol and a blue screen keep switching on my screen but I cannot use the phone. I am on vacation and now have no phone!

I have this same problem. My phone has now been demoted to a very expensive paper weight. Tried to update IOS about 3 hours ago. Now phone is stuck with the "apple" on screen. Won't do ANYTHING! Seriously reconsidering my next upgrade in ~2 months...

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Firefox 4 will not work with my OSX 10.4.11. I cannot now get back the old version. what can I do?

Just downloaded Firefox 4. It replaced the older version on my mac but will not work with my current version of OSX.
I cannot find where I can download the older version so now I do not have Firefox. Can you help>

Perfect! This works!!! Mozilla... remember many Mac users keep machines a looooong time! They are like an old Mercedes. They never die.

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

I have recently switched ISPs and have anew e-mail address but ThunderBird will not work with this address. Have tried tech staff with Bell to no avail

My old e-mail address was SHAW XXXXX.and worked very well with Thunder Bird mail. I recently switched to new ISP Bell and my new address is XXXXXX However with several attempts with techs ,Thunder Bird will not work with my new ISP. I had to start using Outlook.com and Outlook Express 6 for e-mail,but I really liked Thunder Bird and have numerous e-mails stored in it that I cannot import.
Outlook Express 6 is outdated and because I am running Windows XP it will not give me a newer version.I find Outlook.com confusing to me. Can you help

Why don't you tell us what you did and why it didn't work? Start from File/New/Existing Mail Account, enter your details, click Continue, then immediately click Manual config. On the next screen enter these settings:
incoming POP server: pophm.sympatico.ca
port: 995
Connection security: SSL/TLS
Authentication: Normal password
User name: your full email address
outgoing SMTP server: smtphm.sympatico.ca
port: 587 (or try 25)
Connection security: STARTTLS
Authentication: Normal password
User name: your full email address
http://support.bell.ca/Internet/Email/How-to-use-Bell-Mail?step=3
Also, enable POP access as mentioned in the link.

PSE13 trial version and it will not work with Windows 7

I have downloaded PSE13 trial version and it will not work with Windows 7

I have been using PSE 13 for 3 months with no problems. When I launch the Editor in PSE 13 this is what I get -
"Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
RAM 12.0GB
64 bit operating system
Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
Windows 7 SP1
Hope this helps.
Lynne

MyDAQ fails Self-Test and will not work with any software

I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip ‏341 KB

Hi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG ‏40 KB

Time Machine will NOT work with Airport Disks!

It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
http://www.apple.com/macosx/features/timemachine.html
It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
1) Mount your AirDisk so it appears on your Mac
2) Open Terminal.app
3) change directories to the AirDisk's root folder located in "/Volumes"
ie: cd "/Volumes/AirDisk Name"
4) execute this command to "bless" the drive to be used with time machine:
touch .com.apple.timemachine.supported
5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

IPod will not work with docking stations

My 5th gen iPod works fine except it will not work with docking stations. I can sync it with my computer and it plays fine, just won't work with docking stations and other accessories like the Belkin FM radio converter. I bought a iMode boom box and it does not work properly with my iPod.
Any ideas??

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Also:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

What functions in lion will not work on my macbook i bought in 2008

I bought lion yesterday and I do not know what functions will not work with my MacBook I purchased in 2008

You won't notice the ones that don't work!
Anyhow, based on my 2007 MacBook (which should be similar), and on the assumption that you don't have a multi-touch trackpad (i.e. one that recognises threee fingers or more):
1. AirDrop won't work. You don't have the hardware to run this.
2. Multi-touch swipes (three finger navigation between Spaces, invocation of Mission Control etc) won't work.
3. Automatically disappearing scroll-bars won't work (i.e. they will be permanent)
Pretty much everything else will work as well as it does on other platforms.

I just spent an hour composing a reply in a thread ("Firefox will not work with paypal"), only to see "You don't have permission" at Submit - total loss!

I was logged in to reply in the thread "Firefox will not work with paypal". I spent the better part of an hour carefully composing that reply, testing cases, providing links, etc... [Hint: Firefox, unlike other browsers, has a problem with scripts from server paypalobjects.com.] Because I had taken so long to compose the reply, it seemed like a good idea to check it via the Preview button, but I got a message that that function was not available. Of course I decided to submit it anyway, but when I hit "Submit" I got a message "You don't have permission ..." - at which point I was (stupidly) on a different page with that message, and everything I had composed was gone!

It might be too late for this, but it's what I use when this happens. Prepare for deep nerdom:
* Open the web console below the error page by pressing Ctrl+Shift+k
* Right-click the blank area and turn on logging of the request and response bodies
* Resubmit the request by clicking the reload button
* Click the new URL that appears to open the viewer showing the headers and bodies
There you may be able to copy out the content of your post from the Request Body. You can use a word processor or text editor to find/replace the + characters back to spaces.

My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync. But then the new info on my iPhone does not backup to iCloud. Is there a solution?

I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?

I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

What features of iOS 6 will not work with iPhone 4s?

Similar Messages

Maybe you are looking for