What file do I use to upgrade WRT54GL firmware?

Just got a new WRT54GL wirless router and am interested in how to upgrade the firmware. Downloaded WRT54GL_v4.30.9_US.tgz from the Linsys support/download website. It's a zip file that contains WRT54GL_v4.30.9_US.tar which is another zip file that contains the source files. But there's no compiled file. Where can I get an executable that can be downloaded to the router?

You'd have to ask Linksys that question....but if the firmware for the 1.0 and the 1.1 are the same, they may just have forgotten to update the page...or they may just consider that if there are no firmware updates for the 1.1, why bother posting it...after all, no one should ever need to re-flash their routers, right??
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops

Similar Messages

What file do I need to upgrade SQLServer 2008 R2 on a virtual machine?

What file do I need to upgrade SQLServer 2008 R2 on a virtual machine?

Hi Jerry_TKO,
If I understand correctly, you want to update to SQL Server 2008 R2 from earlier version. If in this scenario, we should notice that not all versions and editions are supported to update to SQL Server 2008 R2. For more details about supported versions and
editions in SQL Server 2008 R2, please see:
http://msdn.microsoft.com/en-IN/library/ms143393(v=sql.105).aspx
For local installations, you must run Setup as an administrator. If you install SQL Server from a remote share, you must use a domain account that has read and execute permissions on the remote share. The following document about how to upgrade to SQL Server
2008 R2 is for your reference:
http://msdn.microsoft.com/en-IN/library/ms144267(v=sql.105).aspx
http://www.techrepublic.com/blog/10-things/10-tips-for-upgrading-to-sql-server-2008-r2/
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

What file does ipod use for library and how do i access it?

Hi.
I almost put this in the ipod discussion but the question has to do with itunes as well...
I have learned that itunes uses an xml file for the library, containing all song information and playlists (not sure about id3 tags for .wav, mp3) but when i looked at my data for the ipod i found no .xml files.
Heres what happened and why i need this:
unplugged the ipod after an osx reboot to winxp bootcamp hung. then i noticed the ipod was erased (or so i thought)
Couldn't access any of the data on the ipod and hadnt a spare 80 gigs to back up my ipod.
I didn't give up and after trying so many data recovery programs i got one to work and now i have what looks like all the songs back - with song titles and filenames - on my comp.
I want my library back too. I want my hard wrought playlists and i want to know what songs i may be missing; I need to rebuild my 'library'.
with the data i retrieved there is a folder called root, and if you follow and go to ipod control>Itunes there are a bunch of temp files and a large file called ipodcontrol and a couple files called playlist but those two were umm, empty. I dont know what any of this stuff is but if i knew how the ipod makes its library that would be a start in seeing if i can somehow get the library back. I know there is a way. I also am sure there are tons of people out there whose tracks have been erased after an auto update or unplug. You can get your music back! It would be so sweet to figure out how to reconstruct the library file too.

I forgot to mention that for you people who have inadvertently erased your ipods, the data recovery program that worked the best for me was called R-Studio.
So anyone know what file ipod uses for its internal library?

What file system to use in exporting from cs3 HD

Hi just a quick thank you for the information that I have received from this forum. Being from a small community this service is well appreciated.
My question is that okay so now I want to export my project and I need to know if there is a file system I can save it to, to be able to bring it back into premier if I so choose. The work flow I use in Premier especially with 2hr plus projects, with all the layering, slo mo etc bogs the project down, when I edited sd I would export half as a movie, edited second half and render to movie and combined both files together to create the long movie. In hd I don't understand the file system I could use, I am shooting sony hd hvr z7u shooting 1080i. So what file system and should it be mpeg or h264. Does Premiere support a workable file system.
Thanks
Joan

If I were you, I would use MPEG-2. Match all the output options to that of your origional footage. I see that your camera shoots HDV, so set the bitrate to 25Mbps or higher. If you have any more questions feel free to ask.

What motherboards can I use to upgrade a ze5300

My parents have a ze5300 laptop and i want to upgrade the motherboard and CPU. Can someone let me know what motherboards I can use? I also need to upgrade the wireless to use WPA2
Thanks
This question was solved.
View Solution.

Sorry, but you can't upgrade the motherboard in a laptop computer. The motherboard and chassis are specifically built to fit each other at the time of manufacture. If you want to use a newer CPU and newer wireless technology, consider purchasing a new laptop computer.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Best practices for ZFS file systems when using live upgrade?

I would like feedback on how to layout the ZFS file system to deal with files that are constantly changing during the Live Upgrade process. For the rest of this post, lets assume I am building a very active FreeRadius server with log files that are constantly updating and must be preserved in any boot environment during the LU process.
Here is the ZFS layout I have come up with (swap, home, etc omitted):
NAME                                USED AVAIL REFER MOUNTPOINT
rpool                              11.0G 52.0G    94K /rpool
rpool/ROOT                         4.80G 52.0G    18K legacy
rpool/ROOT/boot1                   4.80G 52.0G 4.28G /
rpool/ROOT/boot1/zones-root         534M 52.0G    20K /zones-root
rpool/ROOT/boot1/zones-root/zone1   534M 52.0G   534M /zones-root/zone1
rpool/zone-data                      37K 52.0G    19K /zones-data
rpool/zone-data/zone1-runtime        18K 52.0G    18K /zones-data/zone1-runtimeThere are 2 key components here:
1) The ROOT file system - This stores the / file systems of the local and global zones.
2) The zone-data file system - This stores the data that will be changing within the local zones.
Here is the configuration for the zone itself:
<zone name="zone1" zonepath="/zones-root/zone1" autoboot="true" bootargs="-m verbose">
<inherited-pkg-dir directory="/lib"/>
<inherited-pkg-dir directory="/platform"/>
<inherited-pkg-dir directory="/sbin"/>
<inherited-pkg-dir directory="/usr"/>
<filesystem special="/zones-data/zone1-runtime" directory="/runtime" type="lofs"/>
<network address="192.168.0.1" physical="e1000g0"/>
</zone>The key components here are:
1) The local zone / is shared in the same file system as global zone /
2) The /runtime file system in the local zone is stored outside of the global rpool/ROOT file system in order to maintain data that changes across the live upgrade boot environments.
The system (local and global zone) will operate like this:
The global zone is used to manage zones only.
Application software that has constantly changing data will be installed in the /runtime directory within the local zone. For example, FreeRadius will be installed in: /runtime/freeradius
During a live upgrade the / file system in both the local and global zones will get updated, while /runtime is mounted untouched in whatever boot environment that is loaded.
Does this make sense? Is there a better way to accomplish what I am looking for? This this setup going to cause any problems?
What I would really like is to not have to worry about any of this and just install the application software where ever the software supplier sets it defaults to. It would be great if this system somehow magically knows to leave my changing data alone across boot environments.
Thanks in advance for your feedback!
--Jason

Hello "jemurray".
Have you read this document? (page 198)
http://docs.sun.com/app/docs/doc/820-7013?l=en
Then the solution is:
01.- Create an alternate boot enviroment
a.- In a new rpool
b.- In the same rpool
02.- Upgrade this new enviroment
03.- Then I've seen that you have the "radious-zone" in a sparse zone (it's that right??) so, when you update the alternate boot enviroment you will (at the same time) upgrading the "radious-zone".
This maybe sound easy but you should be carefull, please try this in a development enviroment
Good luck

What file size is used for "optimized" upload/download?

When I upload my photo files from Aperture (and previously from iPhoto) I routinely use the upload setting named "dowloading of optimized" files. I know that this downsizes the files for faster upload/download, but still gives a file size acceptable for great onscreen presentation and for a resulting small print of someone downloads. Can anyone tell what downsizing Aperture/iPhoto does in this case? For example, 50% jpeg, email sized jpeg, etc. Since Apple will kill the MobileMe galleries in June I have to switch to another photo presentation host. For upload to such a host Aperture/iPhoto gives choices like 100% jpeg, 50% jpeg, etc. What I want to do is end up with something similar to what I now get with the "optimized" setting. Thank you.

You will note that I referenced both programs (iPhoto & Aperture) in my original message above, and I have posted in both forums. Since both programs offer the same (at least on the surface) option of "optimized" to MobileMe galleries, one might assume that both use the same or a similar system. Lengthly testing of my own is the "best" solution only if I can not find anyone who is knowledgeable about what these programs do in the upload. It has been my sincere joy over many many years that I often find people on these forums who possess knowledge much greater than I. As to the programs changing the algorithum at any time, I doubt that since this MobileMe function will disappear in June. Seems like a strange time to make changes.

What file size is used for when uploading to MobileMe from Aperture?

When I upload my photo files from Aperture (and previously from iPhoto) I routinely use the upload setting named "dowloading of optimized" files. I know that this downsizes the files for faster upload/download, but still gives a file size acceptable for great onscreen presentation and for a resulting small print of someone downloads. Can anyone tell what downsizing Aperture does in this case? For example, 50% jpeg, email sized jpeg, etc. Since Apple will kill the MobileMe galleries in June I have to switch to another photo presentation host. For upload to such a host Aperture gives choices like 100% jpeg, 50% jpeg, etc. What I want to do is end up with something similar to what I now get with the "optimized" setting. Thank you.

You will note that I referenced both programs (iPhoto & Aperture) in my original message above, and I have posted in both forums. Since both programs offer the same (at least on the surface) option of "optimized" to MobileMe galleries, one might assume that both use the same or a similar system. Lengthly testing of my own is the "best" solution only if I can not find anyone who is knowledgeable about what these programs do in the upload. It has been my sincere joy over many many years that I often find people on these forums who possess knowledge much greater than I. As to the programs changing the algorithum at any time, I doubt that since this MobileMe function will disappear in June. Seems like a strange time to make changes.

HELP!: How to read and write to External hard drives? What file system to use?

hey all, this has been really frustrating for me today. i want to be able to write to an external HDD that's formatted in NTFS. today i find out it isn't possible to write to this file system on a Mac and that on FAT32 it is possible. however, FAT32 can't address files larger than 4GB so this hurts me a lot. are there any other file systems that'll allow me to read and write from a Mac? my goal was to use freeNAS to build a NAS with an old tower and connect my external hard drives to it, but if i can't write to them this may not be possible.
thanks guys, i'd appreciate any help!

Read this, you don't need to install any software unless you have no choice.
https://discussions.apple.com/docs/DOC-3044
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

What files can i use??

I just recently purchased music off the internet but i can't download it on to my mini. It says that the files used wont work. Does anyone know how to get .wma files to work or is it impossible? Thanks.

Hi Trevor
If you purchased music from an online company that provides protected WMA files then, no - you can't use the iPod to play them, unfortunately. The iPod will only work with purchases made through the iTunes Store.
Matt

What chipset should I use to upgrade my dv2109nr from a T1350 Core Solo to a Core 2 Duo?

Hello all,
I want to upgrade the current T1350 Core Solo I have on my HP dv2109nr notebook. I was thinking of a Core 2 Duo T5500 but is it compatible with bios F.39 revision? More generally, are there any other compatible Core 2 Duo chipsets?
Thanks in advance for your help!

So, no one can help me?

I'm getting error "copying files failed. the required file is in use". How do I find the file?

I've found this question is elswhere but no answers. I'm trying to consolidate my library to an external hard drive since I'm pretty sure my current drive is about to fail. The entire process has taken me days due to one error or another. This is my most recent error and so far there is no way around it since it does not show me what file is in use.
Help?

I used "Carbon Copy Cloner" to copy my library from one external disk to another.
The "library" consists of a bunch of files and folders (see links at end). You don't need CCC to copy it, just drag the whole iTunes folder in your Home > Music from one drive to the other.
I pointed my iTunes library to the new location under iTunes preferences.
No, don't do it with preferences. Once you have moved the folder as above, start iTunes with the option key held down and guide it to the library.itl file on the new drive. This is assuming you have been using iTunes's default settings and haven't been managing your media yourself.
I used iTunes to "Consolidate Library" to verify that all files had been moved.
Okay, in doing that you have moved just your media to the new drive but left all your other library files on the old drive.
iTunes succesfully copied/re-attached a lot of files before giving me the error that the disk could not be read or written to.
Try it with my method.
I began to troubleshoot the hard drive by checking the cables and scanning for errors.
This disk checked out fine.
I identified the failure and subsequent error was due to corrupted files.
I watched the consolidation process and was able to see which file it was trying to copy before it errored out.
I deleted the corrupted file and restarted the process (I repeated this numerous times).
When the process seemed to be just about over, I got the error "Copying files failed. The required file is in use."
I'm sure this is likely another corrupted file, however, it happens so fast that I have no way to identify what file is causing the problem. I tried making sure no other processes were running and no other windows or media players were open. I also tried to look for an error log but was unsuccessful.
Any ideas?
Disk Utility will scan for a corrupt directory but I don't think it works on the file level if it is a single file that was corrupted. I know I have seen Carbon Copy Cloner pick up on single file error when I had one sitting on a bad sector of a drive several years ago. If you can identify the corrupt file this way then you will have to use a backup copy since it is unlikely it can be rescued.
If you have Diskwarrior it has a file check utility.
You have, of course, restarted your computer before doing all this, and keep other computer activity to a minimum (don't play music while copying the files and don't use other applications that coupld potential be trying to get access to your files)?
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

Best Practices for Upgrade UCS firmware from 2.0 to 2.2?

Hi
I have Cisco UCS system ( 2 FI, 4 Chassis with 32 Server ) running 2.0 firmware. Now I want upgrade to 2.2. When I check document "Upgrading Cisco UCS from Release 2.0 to Release 2.2", I see have 2 solution:
- 1. Upgrading from Release 2.0 with Auto Install -> Step simple but all server reboot at same time.
- 2. Manually Upgrading from Release 2.0. -> Step more complex but can upgrade server one by one.
My question:
- Can I "Upgrade the infrastructure firmware with Auto Intall but upgrade Server with Manual"?
- What is best for my case?
Thanks

Hi Phamcongtuan,
In UCS you can create host firmware policy that can be used to upgrade the firmware of your blades. Once you upgrade the infrastructure firmware, you can apply the host firmware policy to the service profiles of your blades. If you are using service profiles templates you will need to unbind the service profiles and apply the policy to the individual servers.
Host Firmware Package
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/cli/2-2/b_CLI_Firmware_Management_22/b_CLI_Firmware_Management_22_chapter_01000.html#concept_6982A188474A452CBFDBBDD7DD4921F3

What files are used to restore?

I have done a restore twice. The first time, after the phone was reset and activated, I selected retore setting from last synch and waited over 90 minutes and then unplugged and synched the phone. That left me without most settings. I did another restore today and obviously after the restore my old settings are not in the last synch. How do I restore from an older synch. My PC is backed up and I could set Itunes back a few days if I knew what files were involved. Any help would be appreciated.

If you have the latest firmware (1.1.2) and iTunes 7.5 it should give you a choice of backups when you do a restore. If it doesn't then that is the problem to try to solve. If you are not on these releases you need to upgrade to them. You also probably cannot recover your data, but you will be able to in the future.
We can tell you where the backup files are (if we know whether you are using Windows or Mac), but knowing that won't help you restore from them. As you said "PC" I'll assume Windows. Backups are in the folder:
C:\Documents and Settings\<WindowsLoginName>\Application Data\Apple Computer\MobileSync\Backup

Why can't I send my files. Asking me to upgrade, but upgrading not needed. Even if i do try to upgrade it won't advance. What's up??? Is your system down???

Why can't I send my files. Asking me to upgrade, but upgrading not needed. Even if i do try to upgrade it won't advance. What's up??? Is your system down???

Hi anthony yerger,
Please let me know what Acrobat and OS version are you using.
How are you trying to send your PDF files?
If possible, please share the screenshot of the error message so that I can analyze it at my end.
Regards,
Anubha

What file do I use to upgrade WRT54GL firmware?

Similar Messages

Maybe you are looking for