What file system to use in exporting from cs3 HD

Hi just a quick thank you for the information that I have received from this forum. Being from a small community this service is well appreciated.
My question is that okay so now I want to export my project and I need to know if there is a file system I can save it to, to be able to bring it back into premier if I so choose. The work flow I use in Premier especially with 2hr plus projects, with all the layering, slo mo etc bogs the project down, when I edited sd I would export half as a movie, edited second half and render to movie and combined both files together to create the long movie. In hd I don't understand the file system I could use, I am shooting sony hd hvr z7u shooting 1080i. So what file system and should it be mpeg or h264. Does Premiere support a workable file system.
Thanks
Joan

If I were you, I would use MPEG-2. Match all the output options to that of your origional footage. I see that your camera shoots HDV, so set the bitrate to 25Mbps or higher. If you have any more questions feel free to ask.

Similar Messages

HELP!: How to read and write to External hard drives? What file system to use?

hey all, this has been really frustrating for me today. i want to be able to write to an external HDD that's formatted in NTFS. today i find out it isn't possible to write to this file system on a Mac and that on FAT32 it is possible. however, FAT32 can't address files larger than 4GB so this hurts me a lot. are there any other file systems that'll allow me to read and write from a Mac? my goal was to use freeNAS to build a NAS with an old tower and connect my external hard drives to it, but if i can't write to them this may not be possible.
thanks guys, i'd appreciate any help!

Read this, you don't need to install any software unless you have no choice.
https://discussions.apple.com/docs/DOC-3044
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

SSAS Cube Dimension Processing Fails Reporting: File system error: A FileStore error from WriteFile occurred

Hi,
I have a SSAS Cube Database for which the processing had been stopped since the year 2012, but as the requirements have again come up, this cube needs to be processed on a daily basis again, to refresh the cube with new incoming data.
As i was testing the cube processing steps before finally re-activating the cube processing in production, i came across a weird error while doing a manual processing for a Dimension.
File system error: A FileStore error from WriteFile occurred. Physical file: \\?\D:\MSAS10.MSSQLSERVER\OLAP\Data\Citi.184.db\Dim Extended Data.0.dim\54.Extended Data.ksstore. Logical file: . . Errors in the OLAP storage engine: An error occurred
while the 'Extended Data' attribute of the 'ExtendedData' dimension from the 'Citi' database was being processed.
This error came to me while i was doing a process update for the dimension, i even tried to do a Process Full for the same dimension which did not help. I then did a Unprocess and then a Process Full, which didn't work as well.
Can anyone please help me with this issue. I am using the SQL Server 2008 where the cube is hosted and the processing used to work fine earlier, but now its failing with this error.
Thanks

This looks like the 4GB string store limit. If you can upgrade to SQL Server 2012 Analysis Services, you can change a simple setting and grow beyond that 4GB string store limit.
http://technet.microsoft.com/en-us/library/gg471589(SQL.110).aspx
If you can't upgrade, what data is in that ExtendedData attribute? If it's a meaningless surrogate key that you don't need users to see, you can use this trick to avoid the 4GB string store limit:
http://cwebbbi.wordpress.com/2012/08/10/storage-and-the-namecolumn-and-keycolumns-properties/ But if it's something the users need to see, there's not an easy way to fix it without upgrading to SSAS 2012.
http://artisconsulting.com/Blogs/GregGalloway

System copy using SAPInst(Export Import database Independent prcoess failed

Hello ,
I am doing a System copy using SAPInst export/import process .
Source system : SAP Netweaver'04( BW 3.5 , Kernel : UC 640 ,Patch level 196 )
Export process fails at Phase 2 - Database Export at R3load jobs running 1,waiting 0 . Below is the log details
SAPSDIC.log
(EXP) INFO: entry for BAPICONTEN                        in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20000621155733
(EXP) INFO: entry for BAPICONTENT255                    in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20031127161249
(EXP) INFO: entry for BAPICONVRS                        in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20010131174038
(EXP) INFO: entry for BAPICREATORDATA                   in DDNTT is newer than in DDNTT_CONV_UC: 20040211101817 > 20000621155733
(EXP) INFO: entry for BAPICRMDH1                        in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMDH2                        in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMEXP                        in DDNTT is newer than in DDNTT_CONV_UC: 20051229175513 > 20031211120627
(EXP) INFO: entry for BAPICRMEXT                        in DDNTT is newer than in DDNTT_CONV_UC: 20051229175514 > 20031211120627
(EXP) INFO: entry for BAPICRMKEY                        in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMKEY_T                      in DDNTT is newer than in DDNTT_CONV_UC: 20051229175835 > 20031211120803
(EXP) INFO: entry for BAPICRMMSG                        in DDNTT is newer than in DDNTT_CONV_UC: 20051229175654 > 20031211120714
(EXP) INFO: entry for BAPICRMMSG_T                      in DDNTT is newer than in DDNTT_CONV_UC: 20051229175835 > 20031211120803
(EXP) INFO: entry for BAPICRMOBJ                        in DDNTT is newer than in DDNTT_CONV_UC: 20051229175514 > 20031211120628
(EXP) INFO: entry for BAPICRMPAREX_T                    in DDNTT is newer than in DDNTT_CONV_UC: 20051229175452 > 20031211120305
(EXP) INFO: limit reached, 5000 tables in DDNTT are newer than in DDNTT_CONV_UC
(EXP) INFO: NameTab check finished. Result=2 #20100113131216
(EXP) INFO: check for inactive NameTab entries: Ok.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
D:\usr\sap\B35\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\B35\SYS\exe\run/R3load.exe: END OF LOG: 20100113131216
***SAPCLUST.log ****
(NT) Warn: EDIDOC: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "EDIDOC"
(NT) Warn: PCDCLS: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "PCDCLS"
(NT) Warn: SFHOA: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "SFHOA"
(NT) Warn: SFHYT: normal NameTab from 20040211095029 younger than alternate NameTab from 20000621155733!
(EXP) TABLE: "SFHYT"
(NT) Warn: UMG_TEST_C: normal NameTab from 20040211095029 younger than alternate NameTab from 20031113150115!
(EXP) TABLE: "UMG_TEST_C"
myCluster (55.22.Exp): 712: error when retrieving alternate nametab description for physical table UMG_TEST_F.
myCluster (55.22.Exp): 713: return code received from nametab is 32
myCluster (55.22.Exp): 299: error when retrieving physical nametab for table UMG_TEST_F.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
D:\usr\sap\B35\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\B35\SYS\exe\run/R3load.exe: END OF LOG: 2010011312563
Please suggest.
Thanks & Regards
Ganesh

Is your DB unicode? If so, did you select the unicode flag in sapinst?
This [thread|System Copy Error while exporting ABAP; might offer some help.
-Zach

Q: How do I convert a pdf file to Word using Adobe Export PDF? - all my attempts are scrambled.

Q: How do I convert a pdf file to Word using Acrobat Export PDF - all my attempts are scrambled

Do you subscribe an Adobe Export PDF account? If you do not have an account, please go to https://www.acrobat.com/exportpdf/en/home.html?trackingid=JPZKN to subscribe.
If you have an account, make sure verify your email address and sign in from https://exportpdf.acrobat.com/SignIn.html
Jyh-Jiun Liou

System copy using R3load ( Export / Import )

Hi,
We are testing System copy using R3load ( Export / Import ) using our production data.
Environment : 46C / Oracle.
while executing export, it takes more than 20 hours, for the data to get exported, we want to reduce the export time drastically. hence, we want to achieve it by scrutinizing the input parameters.
during export, there is a parameter by name splitting the *.STR and *.EXT files for R3load.
the default input for the above parameter is No, do not split STR and EXT files.
My question 1 : If we input yes instead of No and split the *.STR and *.EXT files, will the export time get reduced ?
My Question 2: If the answer is yes to Question 1, will the time reduced will be significant enough ? or how much percentage of time we can expect it to reduce, compare to a No Input.
Best Regards
L Raghunahth

Hi
The time of the export depends on the size of your database (and the size of your biggest tables) and your hardware capacity.
My question 1 : If we input yes instead of No and split the *.STR and *.EXT files, will the export time get reduced ?
In case you have a few very large tables, and you have multiple cpu's and a decent disk storage, then splitting might significantly reduce the export time.
My Question 2: If the answer is yes to Question 1, will the time reduced will be significant enough ? or how much percentage of time we can expect it to reduce, compare to a No Input.
As you did not tell us about your database size and hardware details there is no way to give you anything but very basic metrics. Did you specify a parallel degree at all, was your hardware idling for 20 hrs or fully loaded already?
20 hrs for a 100gb database is very slow. It is reasonable (rather fast in my opinion) for a 2tb database.
Best regards, Michael

Since updating to the latest version of iTunes (11) I cannot find the files that I need to export from apps on my iPhone to my Desktop PC

Since updating to the latest version of iTunes (11) I cannot find the files that I need to export from apps on my iPhone to my Desktop PC

Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain.

Can one network hard drive back up both a Mac and a PC? What file system?

We have both a Mac and a PC on our home network. I would like to use a network external drive to back them both up, instead of connecting each to its own external drive for backups. Iomega makes one, for example.
The external drives I see advertised say that they are both Mac and PC compatible, but don't explicitly say that you can connect both at the same time. Can you?
If so, what file system does the network drive use? Does it have a partition, one side with HFS for Mac and the other with NTFS for Windows? Is this really workable?
And most importantly, will such a network drive work with TM?
Confused,
Barb

I have a late 08 MackBook Pro and several Vista & XP machines. I currently backup the MBP and the primary Vista machine to a 1 TB drive attached via USB to an Airport Extreme router. No problems backing both up through the APE to the USB drive.
The one thing I read when getting ready to set this up is that I should format the drive with the Apple file system, not one of the Microsoft file systems. I did (did it as an external drive off the MBP), and had no subsequent problems with Time Machine backups or Vista backups (using Acronis True Image).

What app do I use to print from iPad to a printer.

What app do I use to print from iPad to printer.

Setup AirPrint Printer
1. Buy an AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and set printer and iPad on the same network
3. Start printing from your iPad using AirPrint

What should I use to export from FCP to DVDSP?

I'm sorry if this question is too basic, but I've searched past discussions and read the manual, and can't seem to find the answer. I am trying to put a nearly hour-long movie I made onto a DVD, in order to have hundreds of duplicates made. I'm using DVD SP, and I had been exporting my movie from FCP to a Quicktime movie file, then importing the Quicktime file into DVD SP. Then recently I came across something online that said you should actually be exporting from FCP to Compressor, then to DVD SP. I've never used Compressor before, so I have no idea what to do, or if I even should be doing it. The video was fine when I exported to Quicktime, but I of course want to have the best video quality possible.. so if there's a way to keep the video at the highest quality possible (higher than when using Quicktime), please let me know (and if it could be explained as simple as possible, I would appreciate that).

Hi Ryan,
I'm relatively new to this too but you're on the right track. I would export to Compressor.
There are various settings i.e. mpeg2 fast encode, high quality 60min, 120min, widescreen, 4:3 etc and all dependant upon what you want your end result to be.
You'll need to choose your format - I suggest mpeg2 - 60min High Quality Encode > your destination for both the video and audio > 'submit'.
You should end up with a file that resembles *My Movie.m2v*
Then import that file into DVDSP into the assets pane and you're away.
Good luck!
-Chuck

How to restore file system of the previous backup from OSB using webtool?

Dear all,
I have some problem regarding to the file system restoration.
For example, I have backed up some files yesterday and today those files have been made change.
So tomorrow I am planning to restore the files from the yesterday backup (the original files before made changes) to other host for testing the data.
Is it possible to do that, since when i restore i can see only the latest ones and search options during restoration are not working well (as date, date range,.....) ?
Your reply to me is very important.
Thanks and regards,
Rasmey

There is no recovery partition on drives which haven't had 10.7 or 10.8 installed. You need to use a Mac OS X install DVD to restore the backup.
(82545)

Discussion: What file system do you use for external backups and why?

I just got a brand new seagate 2TB hdd to act as an external backup.
I use ext2 with it, because it's USB (sata->usb enclosure), and I'm not likely to connect it direct to a PC anytime soon (also my computer is old and I liek to keep ram usage down as much as possible)...
What filesystems do you use\prefer for external backups.. and why?
Also, what type of connection do you use (USB,eSATA,etc,) and size (ie larger then a disk on key..)?

I used to use ext4 on a 1.5TB HD, but recently switched back to ext3—and a tiny NTFS partition for the ext2fsd install file. I realized I use this drive a lot more outside of my Linux environment than I thought, and it was a hassle (and also unsafe) to disable driver signatures at Windows boot just to get a dev version of ext2fsd to work.
pseudonomous wrote:If portability to other operating systems is a concern, then fat32 is, unfortunately, still the best choice, unless you have single files bigger than 4gb, which would probably mean you want to use ntfs or ext2.
While helping a friend with her external hard drive, I noticed another limitation of fat32: only 65535 file descriptors per directory. She tried to backup her entire NTFS Windows C: drive to a fat32 one. Took us a good while until we figured that out, and I couldn't find much about it on the net.

File System Sharing using Sun Cluster 3.1

Hi,
I need help on how to setup and configure the system to share a remote file system that is created on a SAN disk (SAN LUN ) between two Sun Solaris 10 servers.
The files in the remote system should be read/writabe from both the solaris servers concurrently.
As a security policy NFS mount is not allowed. Some one suggested it can be done by using Sun Cluster 3.1 agents on both servers. Any details on how I can do this using Sun Cluster 3.1 is really appreciated.
thanks
Suresh

You could do this by installing Sun Cluster on both systems and then creating a global file system on the shared LUN. However, if there was significant write activity on both nodes, then the performance will not necessarily what you need.
What is wrong with the security of NFS? If it is set up properly I don't think this should be a problem.
The other option would be to use shared QFS, but without Sun Cluster.
Regards,
Tim
---

Can btrfs(2.6.31) file system be used during an install

Hi,
I would like to use btrfs for my root and home partition during an initial installation, but I notice that the btrfs in kernel 2.6.30 (what's on the CD) is old and has had the file system
format changed as of 2.6.31, so is not backward compatible.
Is there any way to install using the latest btrfs from 2.6.31 (or 2.6.32 if it is out ..) .... or am I just too beeding edge on this ..
Cheers,
Bernie

Cool, I am not the only one as it seems
I might be wrong but doesn't btrfs handle file system upgrades? But even then it doesn't seem to be possible to setup the root filesystem for btrfs currently. Because the setup enviroment lacks the proper tools, like mkfs.brtfs.
Maybe stability is an issue here. Some user might get very angry if their data gets lost After all btrfs is still under development.

What operating system to use?

My iBook that I have used for most of my years in college quit working so I dug out my old computer, a PowerBook G4 (the one before the titanium ones with the black keyboards) I havent used it for about 5 years but everything is still working pretty well as far as I can tell. The only problem is i cannot remember my password for it. I have tried everything I could think of but nothing is working. I took it to our IT desk at school and they said I have to install the operating system again, but that cd is long gone. I tried installng Leapoard but it didnt work, i think this computer is too old for that. Which one do I need to get for this computer?

I would skip this command. It will make all of your login IDs to disappear. The data will still be there.
mv /var/db/netinfo/local.nidb /var/db/netinfo/local.nidb.old laughed
The rest of the info is fine. Once you have the new administrator id, you can change the password on your old id.
Change Password
Mac OS X:
Changing or resetting an account password via GUI:
Resetting a user's password
Resetting the original administrator account password
http://docs.info.apple.com/article.html?artnum=106156
You do not have a CD/DVD
Changing password from single user mode:
You can also change the administrator's password from single user mode or create a new administrator account.
You need to get into single use mode for steps one and two that are listed below.
This page will tell you how to get into single user mode.
http://support.apple.com/kb/HT1492
Basically, you hold down the command-s key then powering on your machine. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar. On a PC keyboard, it will be the windows key, I think.
1) You can change the password on an account. ( Do you know Unix. You are in a Unix single user console. ) The setup commands you need should be listed on the screen. For Mac OS 10.4.11, the commands are:
# Type the follow two instructions to access the startup disk in read/write:
/sbin/fsck -fy
/sbin/mount -uw /
# Start up some utility processes that are needed.
sh /etc/rc
# You will probably need to press the return key once the system stops typing.
# To find out the users on the system type, use the list command. The l is a lower case L:
ls /Users
# One of these accounts will be the administrator.
# Pick one of the users which I'll call a-user-name and type it in this command:
passwd a-user-name
# and enter the new user password. You need six characters.
# You will need to enter your password twice. Your typing will not show up on the screen just
# press enter when you complete the typing.
# For cryptic information on these commands try:
man ls
man passwd
The root account isn't enabled by default. I am not sure if changing the password on root will enable it.
2) Get the Mac to set up an additional administrative account. You can then change the password on your old account.
Start with your computer power off. Hold down command-s. Power on your computer.
Type in the following:
The first two commands will depend on your release of Mac OS X. Look at what is typed out in the console to determine the exact format.
# Type the follow two instructions to access the startup disk in read/write. Press return after each command.
/sbin/fsck -fy
/sbin/mount -uw /
cd /var/db
pwd
#List all files. The l is a lower case L.
ls -a
#The move command acts as a rename command in this format.
mv -i .applesetupdone .applesetupdone.old
reboot
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
Limnos adds detailed explainations:
http://discussions.apple.com/message.jspa?messageID=8441597#8441597
The above the idea came from a post by JoseAranda at September 9, 2006 3:48 AM
http://www.askdavetaylor.com/howdo_i_reset_my_mac_os_x_admin_rootpassword.html
You will need to scroll down to see this post. Search for applesetupdone
Or see:
http://superpixel.ch/articles/running-setup-assistant-again/
Once you have a new administrative account, you can change the password of your old administrative account
blue apple > System Preferences > Accounts
• You can see that it is easy to change your administrator password. You can set a firmware password that you enter before your machine will boot.
http://support.apple.com/kb/HT1352
• For the best data security, you should use FileVault. Create a good logon password. Define and use a good backup plan. I do not recommend using FileVault unless you really need the security because it is much harder to recover your data should you have a hard drive problem and you do not have your data backed up.
bad

What file system to use in exporting from cs3 HD

Similar Messages

Maybe you are looking for