What files off the new nforce driver r required

hi im trying 2 make a new driver floppy 4 windows install of the sata drivers eg sata raid and storage controller but i am unsure as 2 what files i need from the new nforce 5.10 unified driver from nvidia. the reason im doing this is my floppy i received from msi is corrupt and i wish 2 setup my raid 0.
my moboard is k8n neo2 platinum

See 1)

Similar Messages

I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.

Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus

I have a macbook pro 10.6.8 system. My hard drive was replaced under warranty. Since then, my computer runs hot. The original hard drive never ran hot. What would cause the new hard drive to run hot?

I have a 2011 MacBook Pro, OS X 10.6.8, 2.2 GHz Intel Core i7, 4 GB 1333 MHz DDR3. This is my first computer so don't know anything about trouble shooting. A week before the warranty expired, I took my computer to Apple to be checked. I was told that my hard drive was bad and they replaced the hard drive. Since then, my computer runs hot most of the time and the fan is constantly coming on, which is good My computer rarely ran hot with the original hard drive. What would be causing this?

racergirl,
have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat?

What files does the new iMovie read?!

I am having a problem with my Mac reading my .MOD files that are being downloaded from my videocamera. I have a JVC Everio and they put the video files on my computer as .MOD as of right now my computer says they cannot read them. The first time I went to the Apple store they said to download .mpeg streamclip and that would convert the files to .MOV yet again that didnt work. When I just went back to the Apple store they said the new iLife 09 would need to conversion....so my question is and please somebody help me....will the new iLife work with .MOD files?!! and if I have a Mac 10.4.11 will I need to buy the new leopard for the iLife to work??

Some Everio's are supported by iMovie 09. [You can see which ones here|http://support.apple.com/kb/HT3290]
Your .MOD files are MPEG2. The Apple Store put you on the right track with MPEG Streamclip, but you also need to buy the Apple QuickTIme MPEG2 Playback Component (costs $20, and you can download from the online Apple Store.)
Once you have installed this, I think that MPEG Streamclip will work to convert your files. Convert them to Apple Intermediate Codec in the same dimensions that your camera shoots in.
iMovie 08 will work just as well once you have converted the files in Streamclip. So, there are a lot of good reasons to upgrade to iMovie 09, but this is not one of them.
[Here is a list of supported camcorders for iMovie 08|http://support.apple.com/kb/HT1014]
If your camera is on it, you can connect your camera to your Mac and import directly. Otherwise the MPEG Streamclip solution will work,
If you do decide to upgrade to iMovie 09 for other reasons, then yes, you will have to upgrade to Leopard.

My old hard drive is dead and I need to move iTunes to the new hard drive

My computer's old hard drive contained some corrupted Windows files. A friend was able to get my husband's iTunes file off the old hard drive and it's saved in the My Music folder on the new hard drive. Can someone please give me super easy to understand instructions on how I get the iTunes stuff onto the new hard drive? I don't want to mess anything up because he has such a large number of albums in the iTunes folder. Thank you in advance!

It sounds like you just have 2 formatted drives (SSD, HDD) that are not configured as a Fusion drive. If so, you have to manually move files from the SSD to the HDD and visa versa.
If your system would have come configured with a Fusion drive (SSD and HDD 'fused' together) then OS X would maintain file movement from the SSD to the HDD without user intervention.
Look here then scroll down to Introducing Fusion Drive for a brief explanation.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

I moved by iTunes files to an external drive because I was changing computers. I then moved the files to the new computer. My iPod is not linking with the files on the computer. What can I do?

I moved my iTunes files from my old computer to an external hard drive. I then moved those files to the new computer. My computer and iPad are not linking up (recognizing each other?). I installed the latest version of iTunes onto the new computer to see if that would help. It did not--I got the message that an iPad can only be linked up with one computer and the new download would not work with this iPod. So the iTunes' library and my iPod are not connecting, and I have no way of installing or removing new songs onto my iPad. What should I do to correct this?

Sorry, I had a typo. The last sentence should have read "iPod" (iPad): So the iTunes' library and my iPod are not connecting, and I have no way of installing or removing new songs onto my iPod. What should I do to correct this?

My hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does sa

my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please

If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard.

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

I have a G4 Quicksilver that no longer works, but the hd may still be good. How can I get files off the G4 hd and onto my new iMac?

I have a G4 Quicksilver 2001 that no longer works, but the hd may still be good. How can I get files off the G4 hd and onto my new late 2013 iMac?

Also, how do I boot the G4 into FireWire Target Disk mode?
First, the G4 must be able to start to use FWTDM. If it can start, hold the t key at boot until you get a "screensaver pattern" that looks like this:
If the G4 is attached via a FireWire cable to a newer Mac with a FireWire port, the G4's hard drive will appear on the other Mac's desktop just as if it were any external drive. A USB cable won't work for FWTDM.
Just wondering if the drive in my G4, which I believe may be an ATA drive will also work in an enclosure for a SATA drive?
No. ATA (actually "PATA" or "IDE") and SATA are different interfaces. PATA external enclosures are now very hard to find. You best and least expensive option is the adaptor that BDAqua linked. One of its connectors is for PATA drives.

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

I have an older IMAC mid 2007 intel core. I want to transfer my backup files from an older Maxtor drive to a new one. My old drive is not support by Yosemite. Can I transfer the files to a new supported drive?

I have an older IMAC mid 2007 intel core. I want to transfer my backup files from an older Maxtor One Touch drive to a new one. My old drive is not support by Yosemite. Can I transfer the files to a new supported drive? I haven't bought a new one yet. Any suggestions as to which new one to purchase?

See if you can get the drive to mount. See mount section of 1st link.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

I just installed a larger hard drive, and used my Time Machine Backup to transfer my info back to the new hard drive. When I open Iphoto, my thumnails are there, but they aren't linked back to the actual photos.I see the photos in my HD. What should I do

I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my HD. Is there a way to link the Iphoto thumbnails back to the original files?

Use the Firewire cable and t boot the old Mac's hard drive to the new Mac's desktop and transfer your entire iPhoto folder.
Use Disk Utiliy to erase'format HFS+ Journaled your TimeMachine drive and use the free Carbon Copy Cloner and clone your new boot drive to the external, it's hold option bootable.

Whats the difference between the old iCloud and the new iCloud drive?

Can anybody explain the difference between the two? The new iCloud drive does nothing new, same as the old iCloud.

Did you read the page that Peter provided? See bold text in paragraph below - you open an iCloud enabled app to see the files.
Storing ﬁles in iCloud is simple. Just as it should be.
To upload your files to iCloud, simply drag them into the iCloud Drive on your Mac running OS X Yosemite or PC running Windows 7 or later. Or start a new document using an iCloud-enabled app on your iOS device. Then you’ll be able to access those documents from all your devices.

What files off the new nforce driver r required

Similar Messages

Maybe you are looking for