What folder do pro app software updates go to

Hello, I wanted to know if anyone knows where these pro app updates go? I want to check what I've downloaded so far. And, if I already downloaded something and I download it again, does it just replace the previous one?
thx

Open your system drive and go to the top level Library>Receipts. All updates are there.
Even if it looks like you have more than one take a close look at the version updates.
Al

Similar Messages

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding Im on OSX Lion and i have a Mac Pro 1.1 please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

What causes Macbook Pro with Software OS X 10.8.5 (12F45) software to lock up?

What causes Macbook Pro with Software OS X 10.8.5 (12F45) software to lock up?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Pro App support updated ?

Reading about Pro app support updated. But where is ?
http://www.macmusic.org/news/view.php/lang/EN/id/3666/

For OS 10.3.9..
http://www.apple.com/support/downloads/proapplicationsupport30macosx1039.html
For 10.4
http://www.apple.com/support/downloads/proapplicationsupport30macosx104.html
Alan

Every app crashes on my MacBook Pro after Software updated several days ago

Hi all,
I got a Macbook Pro 8,1 (13,3" Late 2011) which worked fine untill 2013-03-20.
After the system software updated on that day, EVERY app( Finder, Chrome, Safari .etc) crashes frequently
even can't open Console, every time I click the icon, it start crashing, I have to force the app quit and re-launch, but it keep crashing, I never encounter these issues before.
I can't use my macbook for my work now. Please help!
Here are the softwares updated on 2013-03-20:
MacBook Pro SMC firmware update 1.6
AirPort utility tool 6.2
Safari 6.0.3
HP printer software update 2.13
OSX Java 2013-002 1.0
Securiry update 1.0
iTunes 11.0.2
My MBP's infomation,
MacBookPro8,1
Intel Core i5
2.4 GHz
Boot ROM version：          MBP81.0047.B27
SMC version：          1.68f99
Serial Number：          C1*******V13
UUID：         ****
<Edited By Host>

Try downloading the 10.8.3 Combo manually and reinstalling:
http://support.apple.com/kb/DL1640

On my macbook pro the Software Update appeared, then it asked me to update some software what should I do?

On my mac the Software Update appeared, then it asked me to update some software,when I clicked Install all or update all, it said that it will restart and it told me not to turn it off, then when the screen appears, it is too slow, I can't "barely" move the mouse, and I saw that It is downloading something.. but really slow.. what should I do, Do I need to turn it off?

Never turn off your Mac while it is downloading, installing or updating software.
Just let Software Update do its thing.

My Macbook Pro downloads software updates but it won't install them?

My late 2011 MacbookPro downloads software updates but when I try to install them, it tells me that it's not supported? The software is currently OS X Lion 10.7.5 and I tried upgrading a few things but it won't install. For example, I tried to get the latest update for iMovie, which is crucial for my studies, but it just tells me to update my macbook which is driving me nuts! Help please?

You would need to upgrade to Mavericks to upgrade iMovie to the version now on the App Store.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

How do I restore my purchased apps / software updates from the app store after my harddrive crashed and i had to replace it? I cannot find my mountain lion OS update and cannot access my icloud!

my macbook pro hard drive crashed while running an OS software update. I had purchased lion then mountain lion software updates a while back and so my system was running on mountain lion.
Now that i have replace my hard drive, i cannot find the purchased updates / apps on my appstore! why is that and how can I restore those updates?

You didn't mention if you clicked on the "Purchases" icon.

Final Cut Pro X - software update issues

Hi,
I’m trying to update my Final Cut Pro X software on my Mac and I keep getting the following error message:
An error has occurred.
The operation couldn’t be completed
(NSURLErrorDomain error – 1102.)(102)
Does anyone know what this means? And, how can I resolve it? I can’t export my projects out of Final Cut Pro either and keep receiving the error message (error -1); which I think is related to the software needing an update.
Any help is much appreciated!
Thanks,
Alicia

that error code in human language means 'no read permission'
Are you logged-in with your Account, you purchased the installed version of FCPX with?
Are you using a purchased version or the trial version?

What is the most recent software update for mac

I have a recent MacBook pro and the most recent software update is over 1gb! I just wondered what it was? M

Michaelbe3 wrote:
I have a recent MacBook pro and the most recent software update is over 1gb! I just wondered what it was? M
A really recent MacBook Pro would be running Lion, Mac OS 10.7, and the most recent update is 10.7.3. The delta update from 10.7.2 was found to cause problems and rather than fix them, the update was pulled and Lion users were directed to the "combo" updater which contained all the code necessary to update any Mac running Lion from any previous version of Lion, which is a lot of code, hence the very big download. BTW, 10.7.3 has been problematic for some software so it would be wise to explore the comments and complaints in the Lion forum before you update since you can't go back if you change your mind without having a good backup. Also BTW, this forum is for the Mac Pro; you have a MacBook Pro, which has its own forum and can probably provide you with more useful information.

HT4623 What if there is no software update option in the settings of my iPhone 3s?

What do I do if there is no software update option in the settings of my iphone 3GS?

In order to update over the air you will need to be on IOS 5.0 or higher.
For you to update your 3GS you will need to plug it to your computer and open itunes. itunes should detect that your phone needs an upgrade, suggest doing a backup before updating.
NOte if you hava an iphone 3G the highest IOS is 4.2.1

Mobile Care app/ Software update always pops up with power on

I am guessing that this is the application Verizon uses to deliver updates to the phone?
Every time I power up the phone, I get a software update screen telling me it is going to download an update, which it never actually seems to do. It's pretty irritating. Is that the normal behavior?
Also, take a look at the permissions for this thing. It has access to everything. EVERYTHING. Not acceptable.

Hi smeister,
Thank you to the community for your responses. After some further research, I see that though there is a MasterCare application in the Market, there is also a MasterCare application that is pre-installed on the Xperia Play. My apologies for any miscommunication.
Looking at the "Info" under The Mobile Care app on the Xperia Play, it's showing it does auto launch when you are using data. It is part of the phone's software to allow Over The Air (OTA) services like OTA firmware, etc. There will be an automatic pop-up when an update is available. The pop-up will go away once the update is completed. I also show that Mobilecare does track the data on the device.
Though this app is pre-loaded, if the software on the phone has been altered and the app is removed, any updates in the future on the device will not be allowed. This is an app that does need to stay on the device in order for any updates to be performed.
I hope this information is helpful and I apologize for mistaking this application for the Android Market Mobile Care application.
Thank you and have a good day!

What if you miss a software update?

What happens if you miss a software update? Can you get it later or keep getting them?
I Pod 3rd gen and I Pad 2nd gen
Cheers

You can update to the latest iOS any time you want. Presently the update are a complete iOS. Just note that if you have say 4.2.1 and and 3 or 4G iPod, you can only update to the latest, 4.3.5 today but not update to any of the ones between.

What to do with unwanted software updates

How do you stop the software updates that you don't have the software for??
My husband has an imacG5 and he keeps getting updates for an IPOD update and he doesn't have or want an IPOD.
I haven't been able to find out the answer to that question anywhere.
Many thanks
Peggy

Hi Peggy, Welcome back to Apple's Users Help Users Forums.
Glad Rod Flyer fixed it for you.
You have rewards to hand out.
Gold = helpful = 5 pts w 2 available not available as RF was only poster.
Green = solved = 10 pts
Quote from emails apple sends re threads:
"===============================================
IF YOU ARE THE AUTHOR OF THE ORIGINAL QUESTION:
===============================================
When you return to view the answers, please mark responses appropriately. Simply login and select the value you desire for applicable responses. As the author of the original question, you may assign a helpfulness value to responses. Please use the following when rating a response:
None: The response was simply a point of clarification to my original question or didn't really help.
Helpful: This response helped with a portion of my question, but I still need some additional help.
Solved: This response has solved my problem completely.
WHY SHOULD I DO THIS?
In short, here are 3 reasons why it's worth a few moments of your time:
1) Other members have taken time out of their day to assist you, so please take a moment to give them credit for the assistance they have provided.
2) Your rating not only helps your peers earn points toward their status in Discussions, but validates the quality of the solution you've received.
3) Other readers will be able determine which response(s) helped solve the original question, which will greatly enhance the knowledge and experience for all community members and visitors.
===============================================
We appreciate your participation in Apple Discussions. Thank you for being part of our community.
Apple Discussions Team" [end quote]

App/software update

sometimes i forget to turn back on back on my silent button after a movie or school so i was wondering if apple could include a silent button timer in a next software update can they do that?

Apple doesn't read feedback here. Use http://apple.com/feedback/iphone.html
You may want to check out the Do Not Disturb feature, if you are using iOS 6: http://support.apple.com/kb/HT5463

What folder do pro app software updates go to

Similar Messages

Maybe you are looking for