What font did Adobe use for the Layer names and context bar (OSX PS CS1)?

I have a problem with my Snow Leopard install. When I disabled the font protection of OSX, to install the full Helvetica Neue set (not just the limited DFont set in OSX), I damaged something. All text in Photoshop CS1 that is used in the input fields of the context bar, and for the names of layers, paths etc is wrong. As text is too big now, the program is harder to use.
What font is normally used in these locations? I need to know what files to put back.

Things change.
Adobe changes things that don't really need changing so they can call it a new .0 version and sell it for a bunch of money. They also change things to follow modern trends in UI design.
Sometimes, they want to push other tools to do some of the things Photoshop used to do. This is so they can make even more money by selling more products!
Have you been through every intermediate version, or are you making a several version jump? I ask because the total amount of change in each .0 version has been manageable. And I personally feel the changes have been worth the money, though perhaps just barely. That's the key in business.
-Noel

Similar Messages

HT5154 What font did iCal use for entries?

Love it or hate it, I'm looking for the name of the font used in iCal up through 10.6 or so. Any ideas?

I admit that this is the first time I've ever used iCal, but judging by the bizarre en dash, here – on 10.6.8 – it looks like Lucida Grande.

What exact metals are used in the iPod 5 and what for?

what exact metals are used in the iPod 5 and what for?

Hey Connor and Josh, The same kind of metals that are found in pretty much all electrics. Aluminum, Gold, Copper, Solder, (I would guess lead free). You will also find plastics and resins, glass and Li-ion, carbon, and silicon. Why do you ask? If your thinking of stripping one down for the metals, it's not worth it, there so little in there it will cost you more to separate the metals than there value by weight. Cheers.

What image resolution should use for the new iPad with Retina display?

What image resolution should use for the new iPad with Retina display?

http://www.ipadcasereview.com/ipad-3-cases-and-covers-top-of-page/#sthash.hZKnxH ku.dpbs
these are the best

What mechanism Oracle 10g use for write (Insert/ Update) and Read (Select)?

Hi
What mechanism Oracle 10g use for write (Insert/ Update) and Read (Select)?
Thank you

Aren't the answers given in PL/SQL forum sufficient enough?Well, as the first answer in that forum directed the OP to this forum you can hardly blame them for the repost.
There is some high-level stuff in the Concepts Guide. If that is insufficient the OP will need to tell us what more details they need to know (and perhaps why).
Cheers, APC

HT201250 I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to ba

I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.

Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

HT4906 I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto?

I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto? To be honest I'm not even sure what type of Mac I have and don't know how to find out what kind it is
I'd also like to make address labels and don't know where to find that either

You would make address lables with the Contacts app.
If you don't have the user name and password used to set up the machine then you need to purchase the apps for yourself.

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Help here > Mac OS X: Changing or resetting an account password

What font does iTunes use for inserts??

I know it uses Lucida Grande for iTunes itself, but what font does it use when printing out a jewel case insert? I have a project that is a gift and want the fonts on the iTunes insert to match what I am putting together for the spines.

Still looking if anyone knows.

What criteria should I use for the monthly updates

I am just starting to setup Software Update for SCCM 2012 R2. The configuration is done with the Classifications and Products selected and working. I selected the Classifications:
Critical Updates
Definition Updates
Security Updates
Service Packs
Update Rollups
Updates
Now I am just looking for the criteria to use for my Software Update Groups.
I watched this GREAT VIDEO "SCCM 2012 SP1 and the new way handling Software Updates explained", URL:
http://technet.microsoft.com/en-us/video/sccm-2012-sp1-and-the-new-way-handling-software-updates-explained.aspx regarding the "new way" we are to be doing the groups and updates. The video is
very informative and explains a lot, but it does not say what criteria is used.
This is the breakdown from the video, but again it doesn't say what criteria may be:
• Keep Software Update Groups (SUG) Limited to 1,000 updates
• Don't split products into different SUG's
• Enabled Delta replication for the Software Update Points (SUP)
• Set High priority for the Software Distribution Group
Software Update Groups
• Exceptions group (not to deploy)
• TMG Definition Updates
• SCEP 2012 Definition Updates
• Outlook Definition Updates
• 2003-2010_All Updates
• 2011_All Updates
• 2012_All Updates
• 2013-01_All Updates
• 2013-02_All Updates
Deployment Packages
• TMG Definition Updates
• SCEP 2012 Definition Updates
• Outlook Definition Updates
• 2003-2010_All Updates
• 2011_All Updates
• 2012_All Updates
• 2013_All Updates
Automatic Deployment Rules
• Microsoft Outlook 2010/2013 Definition Updates
  ○ Run after synchronization
• Monthly Updates
  ○ Every Month on day 16 of the month
  ○ Uncheck "Enable the deployment after this rule is run
• SCEP 2012 Definition Updates
  ○ Run after synchronization
• TMG Definition Updates
  ○ Run after updates
I am specifically looking mostly for the Monthly updates and to make sure they are only those needed. Most I have seen use:
Superseded: No
Expired: No
Bulletin starts with "MS"
I don't really know what the "MS" limits things to. Sorry a lot of information and not very clearly laid out.
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

I am specifically looking mostly for the Monthly updates and to make sure they are only those needed. Most I have seen use:
Superseded: No
Expired: No
Bulletin starts with "MS"
I don't really know what the "MS" limits things to.
I use a similar approach, as one part of my routine.
When you filter/search on Superseded=NO, that discards the updates which are flagged as superseded, but this depends totally upon your routine and understanding of the nature of supersedence, and it's also time-sensitive, since CM12 will by default, kill off
superseded updates after a time. A Superseded update *is* deployable, but you'd likely only do that, if the superseding update is unsuitable for your environment for some reason, e.g. it introduces a bug or regression that you can't afford.
Expired=NO, well, again that's to limit your filter/search results. Since an expired update is not deployable, why bother to have it in your results list, if you are building a deployment. It's handy to know that something is, or has become, expired, if
you are troubleshooting or analysing a "why did/didn't xyz happen?", but for deploying, expired updates are just useless clutter.
Bulletin starts with "MS" can be handy to filter out the "non-security" updates, since "security" updates are always issued with an MSyy-nnn bulletin ID.
Note that the bizarre MS definition of "security update" does not mean that security bulletins cover *all* security-related updates, since there are updates that are released, which do provide security fixes, enhancement, etc, but they don't always attract
a security bulletin ID, so it really pays to look at "starts with MS" and also "does not start with MS" - I use both, when searching/filtering, as a way to slice the assessment/analysis task in "half" (not evenly sliced ;).
And also note that some updates (security advisories, hotfixes, rollups) may not fall into the classification you might expect, or, might not be published into the MU/WSUS catalog feed at all..
An example of a unexpected classification, is the recent 2917500, which is classified under "Feature Packs", even though it is an updated set of revoked root certificates (due to yet another compromised root CA cert). [I noted you didn't mention the Feature
Packs classification, you might want to revisit that choice...]
Personally, I'm not yet using ADRs, not because I don't like them, but because our security ops team are being especially painful at the moment and keep changing their mind about stuff, plus, we are undergoing a massive application change cycle and the change/release
team are hypersensitive just now.
One method I also use, is to periodically run the "updates needed but not deployed" report, as it reveals to me where I need to sync a new product, or have overlooked an update or misunderstood/incorrectly assessed as "we don't need that, or that doesn't
apply to us". it also reveals where I have mucked up and not been diligent about taking a templated approach to deployments, e.g. if I forget to distribute to all DPs or whatever.
I find that even though I might take what I consider to be a very generic approach, others in the forums clearly have different environments/operational models to me, and different needs. For patching, I mainly focus on Windows client OS and Office,
and not really on Windows server OS, since somebody else handles server builds and patching in my org.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

What Plugin do you use for the Mastertrack

I am curious to know what plugin people use for the mastertrack, given that there is only one open slot .
Any recomendations

I have been using this free AU for a while now on the master track:
Slim Slow Slider: C3 Multi Band Compressor 1.2
http://www.apulsoft.ch/freeports/
Scroll down the page from the above link to find the C3 Multi Band Compressor 1.2
Features:
Three stereo compressors.
A master limiter.
Flexible dividing filters(ButterWorth Filter or LinearPhaseFIR Filter).
Sampling Rate: 44.1k, 48k, 88.2k, 96k support.
32bit float internal precision.
I really like it, however it does not come with a manual.

How do I find out what I have recently purchased for the app store and iTunes I.e films, songs, albums

How do I find out what I have recently purchased from the app store and iTunes I.e films, songs, albums & apps?>.<

On your iPad, you can open iTunes and click on Purchases. Plus, when you purchase something from iTunes, you should get an email with the purchase details to the email you set up as your Apple ID. They sometimes take a day or two and with the volume of things being purchased with the millions of new iPads out there in the last 3 days, that may be a bit longer. I keep every receipt I get for future reference.

What Keyboard Did You Use For Bootcamp

I was wonder which keyboard you used to install bootcamp. Whenever I install bootcamp it says to press enter but none of my 3 keyboards work, one of which is a apple keyboard.(not the new slim)

[vEX] wrote:
con wrote:I use Xmodmap to get the keys to work...then just assign them actions throuhg the global shortcuts in applications
If youre not gettign any codes, dmesg or xev, turn of the computer switch to the PS/2 port youre using USB to connect the keyboard, USB hid driver hasnt got the functionality to give those extra keys scancodes and the devs dont seem willing to do anything about it...
Follow the wiki hotkyes instructions and you cant go wrong, someone posted link to them earlier.
Not wanting to sound rude, but if you had even bothered to read the thread you would have seen that the keys are working fine with xbindkeys, it's the process of autostarting xbindkeys with openbox that doesn't work.
However, I've now started using the built in keybind function in openbox, though for some reason I can't execute mpc commands (ie: mpc stop), it just won't work. Instead I have to use Sonata (ie: sonata stop), could the reason be that mpc outputs info while Sonata does not when you use those commands?
EDIT: It wasn't, I added the --no-status switch but it still won't work with mpc.
Actually i read every post in this thread before posting, sorry if came of sounding mean (sv:elak) or something. Thought you just wanted to know what apps ppl were using to get multimedia keys to work (alot of ppl seem to be having problems with this), didnt realize that you wanted help. Maybe choose a better title if you dont want too confuse ppl like me. Again sorry:)

What Font Did I Use?

New to LiveType, only used it a few days. Quick question: how can I find out what font I used? I still have the project. I just can't tell what font name I used. I see the text in the Inspector, but if I select it an dlook at the fonts tab it doesn't highlight the font that I used. Any way to tell what was used? I'm new at this...
Thanks,
Scott

Highlight the text track and look in the Inspector > Text pane.

What does the password stored in the JAGENT wallet do, and what JAVA_HOME should I use for the pw_agent_util.sh command?

I am configuring the GoldenGate Plugin for OEM. There is a step to create the wallet. The documentation is not clear about the role of the password supplied. If I run the JAGENT as oracle user, should it match the password for the oracle user, or is this password separate? Also, should I use the OEM agent jdk for the JAVA_HOME setting?
./pw_agent_util.sh -jagentonly

Pat,
Morning. Good to see that someone is working on using the plug-in for GoldenGate within OEM12c.
If you are using the plug-in 12.1.0.2, you will be much better off with reporting on GoldenGate processes. In order to get the 12.1.0.2 plug-in to work, the JAgent 12.1.3.0 is needed and can be downloaded in the Oracle GoldenGate Monitor distribution (Configuring Oracle #GoldenGate Monitor Agent | DBASolved) . If you are using the old plug-in 12.1.0.1, then the JAgent is embedded with the GoldenGate software (Oracle GoldenGAte (11.2.1.0.1 and later) and Oracle Enterprise Manager 12c | DBASolved). I recommend taking the new plug-in!
Now to address you question about the password. The password is stored in the wallet under the GoldenGate home ($OGG_HOME/dirwlt) and is used directly for the JAgent to login to the EMAgent and communicate with OEM. The user name associated the password is configured in the $JAGENT_HOME (different depending on version, look for Config.properties). Then in OEM, the username defined in Config.properties and the password in the wallet needs to be provided before OEM will pick up the GoldenGate targets.
The $JAVA_HOME setting depends on the version of JAgent you are going to run. The JAgent 12.1.3.0 using JDK 1.7 or higher. The embedded JAgent using JDK 1.6.
Thanks
Bobby

What font did Adobe use for the Layer names and context bar (OSX PS CS1)?

Similar Messages

Maybe you are looking for