What font do you use in your terminal emulator?

I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
Of course if you do not use the terminal this post is not for you.
Last edited by ezzetabi (2007-09-20 10:36:52)

ezzetabi wrote:I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
I never saw this particular font, but I second that, fonts is the only thing MS do well imo
And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
Of course if you do not use the terminal this post is not for you.
terminus

Similar Messages

I'd like to get your opinion: POLL: What font do you use?

People,
I am curious to know what font you guys use for text in your various corporate projects? I'v used Helvetica for years, as it is corporate and clean, but I am looking for others.
POLL: What font do you use - let's say for corporate brochure/annual reports texts?

Jack,
You may also have a look at some of the font talks in the Typography forum, or start a thread there; among the latest was this one: http://www.adobeforums.com/webx?128@@.ef602ce.59b709a5
Obviously, the wrapping should fit the contents.
When all is said, I still prefer the fairest font.

What procedures do you use in your organisation for requirements analysis..

What procedures do you use in your organisation for requirements analysis, quality management and change control for your custom abap development?
which process do you think work best for each stage\phase? is there are sap recommended process for each of these phases?
thanks
Bijo

ezzetabi wrote:I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
I never saw this particular font, but I second that, fonts is the only thing MS do well imo
And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
Of course if you do not use the terminal this post is not for you.
terminus

What headphones are you using for your play

Im just curious to find what headphones people are using for there mp3 players, i am using some JVC gummy's there not expenci've at about ?6.99 and they come in about 5 colours which is nice if you have a player like a zen micro, n200 etc...... If you want to know where to get them i got them from dixons, there pretty good Message Edited by sababas on 08-24-2005 0:47 PM

I use Koss SparkPlugs on my N200. Cost about ?5, very comfortable and good sound quality and volume.
PB

What CPU are you using on your board?

Hi there,
I like to know what CPU you are using at this time.....
Just to see what AMD's are used....
Bas.

Quote
Originally posted by hardwareman
hi there bas,,
I voted for my first AMD XP 2000+ )
and am using the msi KT3Ultra-ARU 8)
greatings!!
Hey man ..
Im runing a KT3Ultra-ARU also .. and I just picked up an AMD XP 2000+ at a Comp show .. and Im haveing a real hard time getting it to run on my mobo ..
I'm haveing trubble at boot , if I get past that I loose my video ...and if I make it past that I get windows to run for only about 20 seconds ..
can anyone offer any advise ..?

What fonts do you use for Opera?

I just reinstalled and some fonts look just plain silly in Opera- Like this website's menu at the top right corner.
So what are your font settings? I'll steal them.

Perhaps you already know, but two important things are:
1) disable X core fonts in opera about:config;
2) uninstall from your system ttf-ms-fonts because opera wants to use them also if you tell it not to use them.

What settings do you use on your X-Fi?

EAX: On, Effects: 0.0dB, DSP: None CMSS3D: Off Crystalizer: Off SVM: Off EQ: Off

well u can go right ahead and turn off that EAX in console, its in no way connected to the EAX in your games, as u said games produce sound through api's in their engines. better look at Alchemy for EAX support in games cuz thats where it is. and ye CMSS3D wont do anything for you since its designed to give additional functionality in surround not stereo systems. and for EQ i tell u to go right and experiment, there is no system that cant use a lil fine tuning to adjust it to your music style, room or just your hearing, we all hear lil diferent.
anyway for reference what "good" speakers are u using?
i got X-Fi Titanium PCI-e over DTS connect to Z-5500
EAX: off? CMSS3D: Stereo surround 50%? Crystalizer: rarely ~30%? SMV: off? EQ: attachment
tbh i assumed wrong, u really have no need for any of the X-Fi functions but if your speakers are at least decent i guarantee u can get more out of them with a proper EQ... and dont read guides how to set up something that is based on personal expirience, there is no "THE RIGHT WAY TO DO IT", try and see what fits you.

What Monitor Do You Use With Your Macbook Pro

I was looking into purchasing a new monitor for my Macbook Pro. It is an older one, 15" 2.5 GHz. I was going to bite the bullet and get the Apple 24" LED one knowing it is a great monitor overlooking that price is almost double of other monitors. But looking at the compatibility, I have to get a $150 adapter which I think puts me over the price hit.
Just wondering what monitor/displays is everyone using that don't require a $150 adapter?

Go to Apple menu -> About This Mac -> More info and tell us your Machine ID. This will say MacBook Pro x,y. It is those x,y values we need to know.

What display do you use with your 2005 Mac mini?

Hi all,
I was wondering which displays people are using with their 2005 Mac minis and
which (if any) adapters are necessary?
Thanks!
Mike

I'm using a Magnavox 15" LCD TV via it's VGA input on my day one mini. The original 2005 minis have a full sized normal DVI output and came with a DVI to VGA adapter. If yours no longer has that, it's the only adapter you'd need for most common computer monitors. Many newer monitors come with DVI already, so no adapter would be needed.

What screen do you use, with your MBP?

Hiya,
im lookin for more screen real estate. what do you guys use? im kind of eyen' the Acds...???
Thanks.

I have been using a 23-inch Apple Cinema Display for two years now, and I have loved every minute of it!
I have never had any problems at all, and I have had the monitor running solid for those two years.
Before my Apple Cinema Display, I had tried displays from Dell and Samsung, both of which had to be returned due to defects.
In the studio, I connect my MacBook Pro to a Sharp Aquos TV, which has always performed exceptionally well too.
Good luck!

What launcher are you using?

What launcher are you using with your Z2?
I'm on Nova Launcher Prime with HERAcon theme and icons.

Apex Launcher

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

Which Bag do you use for your Camera? What about the GadgetBag 300EG?

I agree - it's all about preference. I use the ThinkTank Retrospective 7. I *love* ThinkTank's attention to detail... everything from having a rain cover included with the bag, to having ingenius use of velcro (sp?) patches to enable you to "silence" the bag so it doesn't make the big "SCRATCH" sound when opening the bag during a quiet event, etc.
My best advice would be to do your research (which you're clearly doing) and have a clear understanding of the return policy wherever you buy it, and then don't be afraid to return it if you get it and feel it doesn't meet your needs. A restocking fee is a small price to pay to not be stuck with a bag that doesn't work for you. And if for any reason you get it and can't return it, there's always eBay.

What font did Adobe use for the Layer names and context bar (OSX PS CS1)?

I have a problem with my Snow Leopard install. When I disabled the font protection of OSX, to install the full Helvetica Neue set (not just the limited DFont set in OSX), I damaged something. All text in Photoshop CS1 that is used in the input fields of the context bar, and for the names of layers, paths etc is wrong. As text is too big now, the program is harder to use.
What font is normally used in these locations? I need to know what files to put back.

Things change.
Adobe changes things that don't really need changing so they can call it a new .0 version and sell it for a bunch of money. They also change things to follow modern trends in UI design.
Sometimes, they want to push other tools to do some of the things Photoshop used to do. This is so they can make even more money by selling more products!
Have you been through every intermediate version, or are you making a several version jump? I ask because the total amount of change in each .0 version has been manageable. And I personally feel the changes have been worth the money, though perhaps just barely. That's the key in business.
-Noel

Which camera calibration profile do you use for your imports?

I have a Canon camera, and have always just imported with the LR settings left to Adobe default, including the Calibration panel set to Adobe Standard profile. Sometimes it provides a satisfactory starting point, other times not. Since reading in another topic's posts concerning importing with other profiles (and setting them as a new import default), I have tinkered around with trying this out. Just curious how others handle their import settings. Do you leave everything at Adobe default (basic, tone curve, detail, calibration)? Or, do you reset to a custom default? What are the actual settings that you use and your reasons why. And, do you import with lens corrections enabled. This information would be a big help in gaining a better understanding of this aspect of LR.
Thanks
Jonathan

Rob Cole wrote concerning Lens Correction settings:
I only do 80% of vignette correction, and 0% of distortion correction by default, and revisit that decision after importing, but nothing sacred about it - plenty of people use 100% for those too and do fine, or use their own pet numbers...
Yes, absolutely use Lens Correction along with Camera Profiles. Like Rob said, "No reason not to!" But there are some considerations. You may like a little vignetting in the picture and 100% pretty much wipes-out all vignetting. Also, since vignetting correction raises image corner brightness, lens aberrations such as astigmatism and coma will be more visible and can reduce image quality near the edges. It's a trade-off as to what amount to use, which will vary dependent on your lens corner performance. I use a default vignetting setting of 50% for wide angle zooms and 100% for all other lenses, and only adjust higher if the image benefits from it. Distortion setting in an ideal world should benefit from 100% correction, BUT it can also degrade the corner resolution with wide-angle zoom lense images which typically have high barrel distortion. I use a default setting of 0%, and only use it for correcting images with obvious geometry distortion. Even then I rarely need to use 100% to make things look "normal." Chromatic Abberrations adjustment can safely be used at 100% for maximum benefit, assuming the profile is accurate over the zoom focal range. The new Adobe lens profiles seem to work very well in this respect.
These are great"automatic" tool adjustments to make our less than perfect zoom lenses perform near prime lens image quality. OK, zooms don't have the wider aperature of prime lenses, but the high ISO of today's DSLR bodies give us a lot of latitude to play with!

What CMS do you use?

Hey guys, I'm the product manager for Oracle Content Marketing. We have integrations into Eloqua and open-source CMSs such a Wordpress, but we're also looking to integrate with other commercial CMSs. What CMSs do you use to manage your websites? Feel free to post general thoughts (or questions) about integrations between Content Marketing and CMSs in general. Love to hear what you think, thanks!

Hi James,
I had built an integration between Sitecore and Eloqua and posted some info on the AppCloud.
Sitecore CMS
You can also check out the PowerHour done sometime ago: Power Hour: Sitecore and Eloqua: How to get the best of both worlds - YouTube
On a side note, the principles used can be applied to virtually any new generation Web CMS.

What font do you use in your terminal emulator?

Similar Messages

Maybe you are looking for