What format can my video assets be?

What format can my video assets be?
I thought they had to be mpg2.
Can they be something else too?
-Thanks

They can be in any major quicktime file format when you are authoring, but DVDSP will eventually encode them to MPEG2 when you build your project.
This means that your assets may lose quality if you start with a compressed source. If you start with MPEG2 they don't get re-encoded, and you maintain the quality.
The best advice is to encode your footage to MPEG2 before you bring it in to DVDSP...

Similar Messages

What format can i use on my apple tv for films

what format can i use on my apple tv for films .. whats best

Video formats supported
H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
Audio formats supported
HE-AAC (V1), AAC (16 to 320 Kbps), protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV; Dolby Digital 5.1 surround sound pass-through
Photo formats
JPEG, GIF, TIFF.

HT2493 What format can I put for the icon?

I want to change the boring icon of the folder icon. But I tried to put the Jpeg format icon and I failed! What format can I put for the icon?

Are you trying to change one of the system level folder icons (so that every folder of that type uses your new icon) or specific folder icons for folders you have created?
The first requires special techniques that modify system level resources & is not recommended unless you know exactly what you are doing.
The second should work just like in the article.

What networks can i video chat with?

I know i can chat with jabber and gmail talk users. However I would like to be able to utilize the video features of iChat. What other networks can i use that will allow the full functionality of video support in ichat?

Hi,
The Jabber Side will work in Video, iChat to iChat user.
You can also use an Apple ID (@mac.com or @Me.com) or an AIM name and you can then Video chat to other iChat users logged in to the AIM servers as well as AIM 5.9 or AIM 5.5 ON Windows XP AND THE Trillian Application on PCs that can also use the AIM servers as a base.
If you have other Macs and they have iChat open you can Video to them over the Bonjour Buddy list. (Although not if both Macs are logged in as Jef A. (your Mac User Account name) as the name in the Address Book on both).
9:21 PM Wednesday; February 18, 2009

Item - IMAGE What formats can it display, is there a catch for others?

We use 10g Forms/App server.
Couple of questions about the item IMAGE in forms.
I have a BLOB that I want to display a preview of. What formats does this show and is it the best item to show a preview?
Also if the document stored in the BLOB is not in a format the IMAGE type can render then I would like to just show a standard image (i.e. a No preview available image). What is best way to accomplish this as it is a DB item and i do not want to overwrite the document?

The forms version I use just allow JFIF as JPG file.
But today, all JPG files uses EXIF format.
Does anyone know if new versions of forms allow this type and if there is a patch to older versions?
Forms
Forms [32 Bit] Version 9.0.4.0.19 (Production)
Oracle Toolkit Version 9.0.4.0.31 (Production)
PL/SQL Version 9.0.1.5.1 (Production)
Server
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
PL/SQL Release 10.2.0.3.0 - Production

Since I can't use MPEG format in iMovie, what format can I convert it to?

What format is compatible with iMovie and takes up about the same amount of space as an MPEG file does?

Mpegs seem to work in my iMovie. What do you mean they don't work. Is it encoded in a codec that iMovie doesn't understand?

What format camcorder for video editing. Making movies?

My 14 yr old son is into making movies. He needs a better camcorder. He makes stop motion movies as well as scripted movies with props. He edits them on his computer and some are really good, especially after he ads special effects to them.
I want to get him a better camera for filiming. Preferrably not over $600 or so. What is the best format video camera for editing on the computer and one that is good for shooting movies. It should have a spot light on it I assume for low light contitions, even though he sets up lights sometimes when he shoots.
Any suggestions as what I should get him? Thanks in advanced.
Aranon

The HF200, along with all other decent high definition camcorders that use flash memory, DVDs, or hard drives, uses AVCHD. And yes, AVCHD is difficult to work with for two reasons:
1) Many software packages didn't/don't support it, but this has changed dramatically in the past year. Apparently Windows Live Movie Maker in Windows 7 supports it. (Not in Windows Vista or earlier.)
2) It requires a lot of CPU power compared to what systems are currently capable of to work with, just like standard definition video did back in 1998-2000. This will also get easier over time.
Both of the above are the price you pay for being on the cutting edge in terms of video quality.
Tape-based HD camcorders use HDV, which is MPEG-2 based. This is somewhat easier to work with, but I would not reccommend a tape-based camcorder (motor noise, ruggedness, cost of media, etc.)
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

What formats can the Mac DVD player App support/play?

I have a list of movies that I imported from my friend, and, I'm having a hard time trying to figure out which formats will work and which wont--totally not tech savvy enough to figure this one out.

Unless the movies are on a DVD disk, DVD Player is not your App. Quicktime is it. You should be able to simply double-click the file to open with QT Player - the Mac knows how! - ÇÇÇ

Since swf files cannot be attached to published flash documents for iPad, what format can be attached?

I have a multi-page animated book for iPad developed in Flash 6. Because of its length and to run more smoothly on an iPad, I’ve divided the pages into fifty separate documents –the last frame of each each page would load the next page, a back button would load the previous page. My question is: since an swf file or anything containing actionscript 3 coding cannot be imported or attached to a published flash document, does Adobe have a solution to this problem?

The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
It isn't possible to partition the TC although you can create a image area.
The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
Read carefully the speed of the USB drive plugged into the TC.

What file format can be used to play 3D videos on Panasonic TVPlasma3D with USB PenDrive?

What file format can be used to play 3D videos on Panasonic TVPlasma3D with USB PenDrive?
I writed to Panasonic Italy support about this question:
"What file format can be used to play 3D videos on Panasonic TVPlasma3D with USB PenDrive?"
Panasonic writed me in a very poor manner and said me:
"...riproduce formati: AVCHD (anche 3D), SD-Video, DivXHD, JPEG, MP3, AAC tramite USB e Slot SD/SDHC/SDXC card..."
"...formato : AVCHD estensione file nella SD: .MTS..."
I made a few videos edited with PremiereProCS5 and exported as H.264 Coding and .mp4 file extension, all side by side, with layout 1920x1080pixels that includes two stretched frames at 960x1080 pixels.
This is the same image layout that uses the Panasonic 3D consumer camcorder "HDC-SDT750", that record AVCHD videos with file extension .MTS.
I also tried to export another video as MPEG2 with .mpg file extension.
But at the store the tests failed, and I cannot see anything!
My questions are:
1) What format can be used by PremiereProCS5 for exporting the Stereoscopic 3D videoclip and play them via USB port on Panasonic TVPlasma3D such "TX-P46VT20"?
2) What codec should be used? H.264? H.264-bluray?
3) What file extension should have the movie file? .mp4?
Many Thanks!
Horsepower0171.

-I already read entirely those threads, but nothing about stereoscopic 3D AVCHD movies through USB port, on Panasonic TVPlasma3D.
(Also, Sony said me that is not possible to play 3D videos on your 3DTV through USB port).
I tried to made a H.264 videoclip, with .MP4 extension, at 960x1080p side-by-side layout, but nothing was displayed, and black screen.
I think that just the AVCHD movies, with .MTS extension, that comes from Panasonic consumer camcorder "HDC-SDT750", can play the 3D videos via HDMI cable, not USB port.
But not the exported videos from PremierePro via USB port.
I seen this tutorial from David K Helmly:
http://www.youtube.com/user/dhelmly#p/a/u/1/_YtF0c2bmkw
Dave export the video from PremiereProCS5 as "MPEG2-bluray" format with "Match Source Attributes (HighQuality)" Preset, and build the Bluray Disc in EncoreCS5, with the footage as MPEG2 with .m2v file extension:
1) Anyone tried to play correctly in 3D, those MPEG2-.m2v side-by-side files, in Panasonic3DTV, with BlurayDiscReader?
2) Why MPEG2.m2v side-by-side?
3) The official standard stereoscopic 3D format, is not the .MVC (MultiViewCoding) for Bluray3D Disc?
I am confused!
Help!
Horsepower0171.

What format do videos need to be?

What Format do the videos need to be in order to put them on my ipod?

Per the iPod Tech Specs:
H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per sec., Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats;
-or-
H.264 video, up to 768 Kbps, 320 by 240 pixels, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats;
-or-
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per sec., Simple Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats

What Formats Are Supported by eprint?

Was able to send a .pdf file for printing via my HP CP 1525nw's email address. My son tried to send an email with a picture taken on his iphone to the printer's email address but nothing came through.
What formats can the printer print? .jpg, .pdf (successful), etc...?
Yes, I have allowed the printer to receive my son's email address.

Hi FredinCT,
Many issues with photos not printing are related to the size of the image. The image may be too small. Please see this link for more information: http://www.hp.com/united-states/consumer/digital_photography/print_better_photos/tips/printing-photo...
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

What kind of video formats can i use to import into imovie?

what kind of video formats can i use to import into imovie?

Hello,
Adobe stopped supporting flash for android since ICS. You may still be able to download the latest (old) flash player "at your own risk" from Adobe archived flash player versions:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Please read the disclaimer at the end as it is not advised to install unsupported flash versions.
As for video streaming, there are lot of apps for that and it's just a matter of your preference.
Hope that helps

I have a video in .avi format, what format do I need to convert to, to play on my DVD recorder, please can anyone help?

I have a video in .avi format, but what format do I need to convert to, to play on my DVD recorder, please can anyone help?

tylerfrombalantine's post had zero grammar in it, so it's not clear what he's saying. I bought a DVD recorder and the instruction manual lists all the disc formats it can play. Check your DVD recorder manual to see what works with it, then burn a DVD that matches. It should be fine to burn just a standard DVD, since of course any DVD player can play that.
Depending on the program you use, you may not have to convert anything manually. The program might convert your current video format to DVD on fly as it burns the disc.

What format of photos and videos can i export from my computer to my iphone/ipad?

Hi,
what format of photos and videos can i export from my computer to my iphone/ipad?
Also i have a problem with Imessage from my Iphoe 4S and Ipad that some of my contacts althought they have activated Imessage from their product i cannot send them any Imessage.
Kind regards.

Regarding the supported formats for syncing from a computer to the iPhone, the following information is from http://support.apple.com/kb/ht4236
On a Mac, these file formats will sync from your iPhoto library to your device:
BMP
GIF
JPEG
JPG
JPG2000 or JP2
PICT
PNG
PSD
SGI
TIFF
On Windows, these file formats will sync to your device:
BMP
GIF
JPEG
JPG
PNG
SGI
TIF
TIFF

What format can my video assets be?

Similar Messages

Maybe you are looking for