What format(s) does Lightroom accept for GPS track logs?

I'm looking to write a simple Windows Phone 7 application which generates GPS tracklogs. I'm wondering what format I should generate on the phone for acceptance by lightroom.
What kind of format should I look to generate?
Thanks!
Billy3

GPX.

Similar Messages

What are Apple doing to compensate for the damage caused by the iPhone 4 bumper?

I have noticed damage caused by the bumper.
It is NOT foreign object but caused by the hard plastic on the inside of the bumper
(plese do not come out with rubbish like steel is harder than plastic) I am not stupid and I know that the damage matches the pattern of the bumper skeleton.
What I want to know is when are Apple going to deal with this and replace my phone?
I dare not go to the so called Genius bar in Milton Keynes as they have adopted a Dixons style "fob off" attitude and I will become rather angry with them.

Re: What are Apple doing to compensate for the damage caused by the iPhone 4 bumper?
15-Jun-2011 15:15 (in response to sfrommilton keynes)
o Steel is harder than plastic, so the bumper has not caused the damage.
- You call it rubbish
- The world calls it physics
You are totally wrong. Please go back to School.
o You can deny physics
- but that will not change reality.
You can go to School but that wont change reality.
o Your description of your Genius bar is incomprehensible
- I recommend you go to the Genius bar leaving the chip on your shoulder at home and tactfully explain what you think is your issue.
I recomend you find a day job ans stop TROLLING peoples threads.
- I've never had them fail me or be the least bit confrontational.
- But if you act like a jerk then I couldn't predict what would happen
Yeah because you were there. Are you having some kind of relationship with the company? I think you sleep with an Apple under your pillow.
Finally I am a consumer who has paid for a product that is not living up to expectations. The plastic skelton is hard and abrasive (I know what that means as I went to School) Abrasion's are marking the product.
This is not the only time this has been reported and as such I have no issue with particles entering the bumber. This has happened from the start (when I used Apples stupid bumber case)
Please don't patronise or TROLL others threads.
<Edited by Host>

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video-.with no way to edit full format video. Is this statement true?

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video….with no way to edit full format video. Is this statement true? Does iMovie support HD 1080p @ 60 fps?

Iggy826 wrote:
… Is this statement true?
yes and no!
using the intended Import from Camera routines, iM converts automatically in its very own AppleIntermediateCodec. so, answer is yes.
but …
a) Apple claims , aic is non-lossy intermediate codec. working with proRes in FCPX taught me, there are even less non-lossy-ness codecs
b) iM offers an Archive feature, which is basically a simple Finder/copy operation which 'clones' your SDcards content into some folder on your harddrive; e.g. you can later use these untouched 'raws' in another editor such as FCPX. so, answer is no.
c) when you 'override' the import routines by manually re-wrapping mts into a mov container, iM handles the 'native' h264s ... so, answer is no.
d) adding any effect, transition etc. reduces any interlaced source to 540p. (if you're working with 720p source, res is kept) … so, answer is yes. or, in 720p case, no.
< Johnny Depp's voice >… savvy?
Does iMovie support HD 1080p @ 60 fps?
via Import from Camera? No.
via re-wrapped mts>>mov? I was told yes, some say no.
one thing to be kept in mind when talking about these 'issues':
iM, this 12€, is meant as a CONSUMER toy tool.
it supports AVCHD vers1 (=no 1080/60p, no >24Mbps, no 3D).
fingers crossed, we'll see soon some iM/QT/FCPX update for support of AVCHD v2 ........
the main consumer devices are within the specs, iM supports.
using professional equipments makes usage of professional software (FCPX, AP) optional.
sorry for lengthy answer.

What format video does itunes play?

i want to download video onto itunes so I can download onto my iPhone and watch, however i don't want to have to pay for it.
what format do i have to download for it to be compatiable?

Copied from this link.
http://www.apple.com/iphone/specs.html
+Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats.+
There are 3rd party utilities available that "rip" content into a compatible format - most include an iPod and/or iPhone format selection. If a video plays in iTunes, iTunes includes an option to convert a selection for iPod/iPhone.

What is the best way to geotag photos with data from GPS Tracker Log (GPX format)?

I just returned from a 4 month trip to Southeast Asia. Before I left, I set the time on my camera, a Canon 7D, to match the GPS time on my GPS tracker, a QStarz BT-Q1000X. Both times were set to UTC, also known as GMT.
I have imported the data from the GPS log into Aperture as a GPX file. Now I would like to sync the location metadata on my photos with the data from the GPS log. How can I do this using Aperture 3?
I seem to be having two problems:
Aperture wants to shift the times based on which part of the track I drag the images onto. Since the camera and gps tracker times were sync'd, I do not want any shift.
The time shifts that are displayed are 12 hours and a few minutes, rather than 0 hours and a few minutes.
A few additional notes:
When I imported the GPS track, Aperture automatically changed the time zone of the track to Asia/Ho Chi Minh City, which is correct (GMT+7).
I have batch changed the images from Camera Time: UTC to Actual Time: GMT+7
The time on my computer is US/Eastern Daylight Time (GMT-4), or Eastern Standard Time (GMT-5) when the photos where taken.
Since I was gone for so long, and my GPS tracker memory is limited, I set the tracker to record a trackpoint once every 60 seconds.
Is there a solution to my problems using Aperture 3, or should I start looking for third party applications to geotag the photos before importing them into Aperture?
Thank you.

I think the 12 hour discrepancy is more likely a result of the 12 hour difference between GMT+5 and GMT-7. The dates and times of the photos and the GPS track are displayed properly in Aperture. See the images below.

CS3 - what container/wrappers does it accept?

I asked this on the Premiere forum, but I suppose it's more of an Encore thread so I'm re-posting on here
looking at the FAQ I can see what codecs it accepts but not what containers/wrappers it accepts those codecs in:
http://livedocs.adobe.com/en_US/EncoreDVD/3.0/help.html?content=WS5C9E1CF8-B5BC-436f-89D3- 61DDC02A2C47.html
does anyone know if any of the following will import?
1080i/1080p mpeg2 with AC3 5.1 audio in TS container (.ts)
720p mpeg2 with AC3 5.1 audio in TS container
1080i/1080p h.264/avc with AC3 5.1 audio in TS container
1080p wmv-hd VC-1 with wma 5.1 audio in WMV container
720p h.264 with AC3 5.1 audio in MKV container
1080i/1080p h.264/avc with AAC 5.1 audio in MP4 container
most Hi-def videos these days are in these formats and I'm wanting to back mine up to Blu-ray and keep the 5.1 audio with no downmixing to stereo. Can Encore handle any/most/all of these formats?
If it can't, can anyone suggest what to use to convert them to a format Encore would allow (except mpeg2 TS files which I can convert to mpeg2 PS or elementary streams)
any help/advise would be greatly appreciated

@ Matthew.
Er, no chance will I be trying
i that
out!
AC3 is already heavily compressed, so decoding to WAV and recompressing again is going to create a file that sounds bloody awful. Once the data has been tossed out in the original AC3 (Dolby Digital 5.1) creation, it is gone forever - and we are talking 6 channels at a minimum of 6,144 kbps to DD at 448 kbps. That's a lot to throw away, and it cannot be recovered again. If you started with 24 bit audio & used a licensed encoder, the loss is paradoxically not so great.
(Wonder if the DD Decoder is actually licensed, or a hack job?)

What format is best to choose for importing to iTunes 11?

Trying to import all my music from Windows XP laptop, (can't find my original CDs, packed away) hours later I found they were in WMA format, not acceptable to iTunes in new Mac Mini, What the? Tell me best choice for format, please? I wasn't thrilled w. MP3, too dull, need sparkle. Would it be best to try from iTunes installed on laptop? I haven't set it back up yet to find out which format those files are in. Thanks in advance.

iTunes for Mac can't transcode WMA files but iTunes for Windows can. You're going to lose a bit of fidelity moving from one lossy format to another but you might find you prefer AAC over MP3. There is also no point in converting low bitrate source files into a higher bitrate so you might want to spend some time with Windows Explorer search in details view so you can split out your WMA files into different bitrates before import into iTunes. Import settings are controlled under Edit > Preferences > General tab.
tt2

What format must video be in for fce?

what fomat must video clips be in for fce?

If you have appropriate QuickTime Components installed ...many different types of files can be imported directly into FCE. Basically everything that can be played in QuickTime Player.
Perhaps true as far as merely importing material into FCE. But that's not the same as successfully editing, rendering & exporting final results with FCE.
Many, many users have rued the day they made the mistake of importing unsupported video formats & codecs into FCE. And too often the problems only show up after hours/days/weeks of editing, only to find out upon final rendering or exporting that the effects don't work, frame sizes don't match, results are all pixellated, stuttery, off color, or the video just doesn't play.
While FCE is based on QuickTime, it does not provide support for all the various types of video & audio formats/codecs that QuickTime itself supports. Perian or no Perian.
FCE was designed to natively edit only QuickTime/DV (NTSC or PAL) and QuickTime/Apple Intermediate Codec video. (HDV & AVCHD are transcoded into QuickTime/AIC during capture.) Using other containers and/or codecs can be a quick way to get a major headache.

What type of file is accepted for proof of purchase upload?

I need to submit proof of purchase for a product purchased with Apple (hello Apple!!!) but it wont accept any type of file- ive tried about 6 or 7.

what is the reason when i read a 24 bit png image...it shows the type as 0 (TYPE_CUSTOM) ?
From the the Field Detail section for the TYPE_CUSTOM field in BufferedImage: the image type is not recognized.
You could make a new BufferedImage with TYPE_INT_RGB, or TYPE_INT_ARGB if the image has or will have transparent pixels, and copy the TYPE_CUSTOM image into it. Then you can manipulate/process the new image.

HT4059 What types of files are acceptable for ibooks?

I have some books that end with .mobi and various other file types. Which are acceptable in iBooks?
Also, where can I put these files in order to add them to either the Kindle app or the iBooks app? Which folder?

You may find these links useful:
http://pondini.org/OSX/LionStorage.html
http://pondini.org/OSX/DiskSpace.html
Ciao.

What color space does Apple use: for its printing: sRGB, Adobe???

My images are coming back washed out, yet look great on screen. my camera is set to Adobe RGB, so i wonder if this is the problem... usually, consumer cameras are sRGB, I think.

Apple uses the sRGB color profile for it's prints, books, etc.
Do you Twango?

What format to export from FCP for iDVD?

I am having trouble coming from FCP to iDVD. Material was shot HDV on a Sony Z5 and I downconverted to DV to edit on FCP. I make a Quick Time Movie of the edit (as DV PAL) but the pans are all juddery. How should I export from FCP to stop the juddering on pans?

http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
BTW, this is the mother of all FAQs here Sadly the FAQ section of the forum decribes just the problem, not any solutions. And searching the forums doesn't always work either.
ObSig: I don't benefit from the link.

Do I need 3G on iPad2 for GPS tracking?

I want to use iPad 2 as a GPS router. I think this could only be done with 3G with the iPad1. I believe this is not the case with the iPad2 (?). From what I understand, the 3G is now stricktly for internet connection through cel phone network. Am I correct?
Tks

3G has nothing directly to do with GPS. It's just that the 3G model is the only one of to two to also have GPS hardware; the WiFi-only model does not. So if you want true GPS capability, you must have the 3G model of iPad (this is the same for the iPad 1 as well as the iPad 2).
Regards.

Login screen does not ask for password when logging into user account

This is an issue that did not immediately manifest itself after I have upgraded to Snow Leopard. I am not sure what exactly triggered it.
Anyway, now at the login screen if I choose to login with my own user account, i.e. clicking on the icon associated to my user account, I am not prompted for the password and the system seems to start trying to login, as there is a discernible pause. Obviously that will fail, and I am returned to the login screen again.
If I choose the other user option, as before I will be allowed to manually type in an user id and password, and using this way I am able to login into my own account (previously I only use this for logging in to the root account).
Any idea on how I can make the field for typing in the password appear again? Thanks.

Just to report that deleting /Library/Preferences/com.apple.loginwindow.plist did not help.
Anyway I installed Snow Leopard again and the problem went away. Hope I will not do something that will trigger it again.

What are F. M's used for creating application log in application server

Hello
plz suggest which F.M's i have to use to create application log
Regards
Kanth

Hi Kanth,
You can go through the following Function Modules :
Application Log Maintenance
(i)APPL_LOG_DELETE With this function module you delete logs in the database according to specified selection conditions
(ii)APPL_LOG_DISPLAY With this function module you can analyze logs in the database.
(iii)APPL_LOG_DISPLAY_INTERN With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
(iv)APPL_LOG_INIT This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
(v)APPL_LOG_READ_DB With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
(vi)APPL_LOG_READ_INTERN With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
(vii)APPL_LOG_SET_OBJECT With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the
(viii)APPL_LOG_WRITE_u2026 messages are written in local memory or are output on the screen.
(ix)APPL_LOG_WRITE_DB With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
(x)APPL_LOG_WRITE_HEADER With this function module, you write the log header data in local memory.
(xi)APPL_LOG_WRITE_LOG_PARAMETERS With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
(xii)APPL_LOG_WRITE_MESSAGE_PARAMS With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like
(xiv)APPL_LOG_WRITE_SINGLE_MESSAGE.
(xv)APPL_LOG_WRITE_MESSAGES With this function module you write one or more messages, without parameters, in local memory.
(xvi)APPL_LOG_WRITE_SINGLE_MESSAGE With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
Regards,
Swapna.

What format(s) does Lightroom accept for GPS track logs?

Similar Messages

Maybe you are looking for