What format to export fcdp project recorded on sony z1 for dvd studio pro

what format do I export a Final Cut Studio project recorded on sony z1 HDV for dvd studio pro. I am getting lines on the edges if I export current settings.

finalcut.ie wrote:
he says sd is this right when i want a hd dvd?
HD-DVD is a dead format. It may play on your mac - or an HD-DVD set top player, if you happen to have one - but nowhere else. If you just want playback on your mac, compress to h.264 with your current frame size. If you want a DVD it will have to be SD and Mpeg-2 as Shawn already explained.
mish

Similar Messages

Exporting Chapter Markers From FCP7 to Compressor for DVD Studio Pro

I put several chapter markers in a Final Cut Pro 7 sequence by hitting the "M" key a few times on the timeline.
I tried exporting the video with Compressor, both by using "Share" and "Send To Compressor."
When I load the post-Compressor video files into DVD Studio Pro, make a track, and look at the track timeline, the chapter markers are not there.
How do I send the video files from FCP7 to Compressor to DVDSP and have the chapter markers survive the journey?
(NOTE: I am not using Final Cut Pro X, where, I understand, that the problems with chapter markers are a whole different ballgame.)

When you hit m twice and get the marker window:
1. Make sure the marker is created on the timeline, not the clip;
2. you have to specify that it's a chapter marker. There's a pulldown or something to select it. It's NOT automatic.

Emergency questions exporting for dvd studio pro (ntsc and pal)

Hi,
I'm under a tight timeline and would appreciate any help possible. I'm experimenting with outputs/burning today so the real thing can happen tomorrow.
I have an hour long project that was shot on two different kinds of cams -- a sony hdv V1U and pan dvx100b. The first shot mostly in 16:9, the second squeeze 24p. We imported all footage as non-hd though, because the V1u has had problems syncing properly with hd settings with final cut. The issue/question now is this-
I don't know what file format (I'm assuming mpeg-4 for DVD studio pro, but using compressor or no?) or settings to use -- I'm used to mpeg-4, but for some reason it is coming out all grainy/pixelated and I'm not sure if I need to adjust the settings. Also, once exported into a usable/high quality format, I need to burn a ntsc dvd but also a pal dvd -- I've burned pal dvds on dvd studio pro before and know adjusting the settings is just in preferences, but I'm assuming the video will need to be converted into a different kind of file. Or no?
My sequence settings are 1440x1080 (16:9), quicktime video settings compressor hdv 1080i60. When I export as a quicktime file the conversion is great and no problems, but that isn't workable in dvd studio pro.
I would appreciate any advice you could offer,
Thank you,
Tenzin

Thank you, I'm trying that -- someone else just mentioned it needing to be an mpeg 2 file as well. The trouble I'm having now in compressor is it isn't converting when I press submit -- nothing is showing up in the batch monitor. I've tried this directly exporting from fcp using compressor, as well exporting quicktime from fcp and then using the quicktime file in compressor.
I'm not used to using compressor so I'm thinking I am not doing something properly in this process? Thank you for the suggestions, they are reassuring. Do you know if the same file produced by compressor can be used for the pal dvd?

Exporting FCP movie for DVD Studio Pro

I am finished with my movie. I am confused now on the exporting to DVD studio pro. How do I do this? My viewer also would like it to be in widescreen because they had just bought a HDTV widescreen.
So how do I go about this. I have made many with iDVD but this will be my first with Studio Pro.
How do I export for DVD studio Pro?
PowerBook G4 Mac OS X (10.4.8) 2GB - 100GB Hard Drive

The most important thing you can do to help us answer your question is to give us the specs on your project. Open Final Cut Pro and click into your sequence. Then go to the menu "sequence" and go to "settings" or simply hit a command-0 (the number not the letter). Then tell us the frame size and the compressor used. From that information, we can get a better idea on how to help you: it is best to start any post with this information.
To export the best quality, go to file -> export -> QuickTime Movie...
From there, export using current settings, include audio and video, and make sure the bottom two boxes are checked (recompress all frames and make self-contained)
Once that file is created, import into DVD SP and you're done. Don't worry about compressor or other formats right now. This will give you the best picture with the minimum amount of headaches. Let us know how it turns out.

What's the best way to master an MPEG 2 file for DVD Studio Pro.

In version 4.5 of FCP I was able to use QuickTime conversion to encode to MPEG2. Now that option is not there. I hate using compressor 2 to create MPEG 2 because when I do the MPEG 2 files always seem to studder and I don't know why. I shot my project in HDV. It is about 64 minutes long. Any suggestions on the BEST way to master an MPEG 2 file for DVD Studio pro? Thanks in advance!
Peter
PS - I'm using FCP 5

Some people have reported a field reversal problem with HDV to SD DVD encodes. There's an Apple technical document on this issue somewhere, but the problem was supposed to be addressed by a Pro Applications update a couple of years ago... This site might help you get to the bottom of the problem.
http://www3.telus.net/bonsai/Step-by-Step.html

Compressor Incompatible Formats for DVD Studio Pro???

I'm at my wits end...I have exported DV/NTSC QuickTime movies from Final Cut Pro and then drug them into Compressor, where I have applied the "fastet" DVD encodes for SD video of 90, 120, & 150 minutes in Compressor (all Apple presets that I have not modified). The files come out, but when I try to drag them into DVD Studio Pro, it tells me that the video files are of an incompatible format. What am I doing wrong here? Any help will be greatly appreciated!

If you did not touch the presets, the first thing I would look for is whether you set the project to PAL and were trying to bring NTSC streams in or vice versa. ( If you had changed anything, such as the Codecs or typew of MPEG-2, then it could be something else.) Any details on the computer or veersion of Compressor and DVD SP?
Is this an upgrade over a prior install?

Exporting from Final Cut Pro for DVD Studio Pro

In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
Erin

The best and only format is mpeg2/m2v.
The encoding rate for video is based on the length of the sequence in h/m/s.
They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

The size of my exported FCP movie is too big for DVD studio pro

Hey,
I have been editing for 4-5 years now and have never had a problem with size of a project to put into DVD Studio Pro to burn. However, I just finished a 2 hour project in which exported as a FCP movie it is 23.97 gb in size. When i put this into DVD Studio Pro it makes it 4.8gb in size which just makes it too big for it to burn. I have tried changing the compression to no avail and just now decided to clean up the timeline so everything is on one track with nothing overlapping. (The problem was it was a 2 camera shoot so the first camera i had on the bottom track constant with the second camera on the top track when i needed it but still with the first camera underneath.) Do you think this could be the solution to my problem? If you guys could help me out it would be most appreciated!

some things don't make sense here. please clarify.
Standard DV is roughly 5 minutes per gig, so that means that you have just about 2 hours of video, ok, got that. Now it's the two track thing that gets me.
Are you saying you have 4 hours of footage, the same thing from two cameras, and you're trying to set up a multi-angle DVD?
If it's just that you used two video tracks to edit, then NO, it is not your problem. It's still only 2 hours, the video will be mixed down to one track upon export from FCP to quicktime.
My suggestion is, instead of bringing a quicktime file directly into DVDSP, use compressor. I believe they have a preset in compressor 2 for a standard 120 minute DVD. IF you're project is truly less than 120 minutes, than that should be fine. If not, then you may have to manually make your own setting and lower the bitrate.
So the workflow is:
-open sequence in fcp
-file>export>quicktime movie... (you can uncheck "make movie self-contained" if you want it to export faster and you plan on keeping your original capture footage around)
-export your movie to a directory of your choice with a name of your choice.
-open compressor (in applications)
-drag the quicktime file you created into compressors main window, this will set it up. Now specify the export setting (120 minute HQ all files either 16x9 or 4x3 dep. on project) and specify a location for the files to be created. I strongly suggest that you use the HQ (High quality) settings in compressor. It's much slower to process, but much better quality.
-with a 2 hour movie it should take a really REALLY long time to compress, so I'de say do it over night.
-when compressor is done, you should have 2 or three files. a .m2v file a .aif file, and a .ac3 file. The .aif is your PCM audio, much better quality than the .ac3, which is dolby 2 channel. However, the .ac3 is a much smaller file with a lower bit rate, so if the .aif makes the DVD file size too big, you can switch it out for the .ac3
-Finally, open up your DVDSP project, drag the .m2v, .aif, and .ac3 into DVDSP and use the .m2v for the video track and either the .aif or .ac3 as the audio (as mentioned above)
-the good news is, your DVD media is already rendered, so when you go to build your DVD it will go much, much faster!
By the way, I recommend you go to file>advanced>build do not do a burn and build.
I find it best to build the VIDEO_TS folder on a hard drive and then use a program like toast to create a DVD (using toasts from VIDEO_TS option). This method also allows you to go back into DVDSP, make tweaks, and reuse your VIDEO_TS folder, not having to rebuild the whole thing each time.
Remember, 120 minutes on a single layer DVD is going to render fairly low quality no matter what.
If you have a newer mac and a dual layer drive, you may want to cough up a few bucks and get a dual layer DVD-R, then you have over 8 gigs of space to work with, perfect for HQ 2 hour footage.

Exporting FCP for DVD Studio Pro

I have finished my movie in FCP and now want to export to DVD Studio Pro. The movie is 13 min. long. What is the best way to do this? Also I want it to be in widescreen format for HDTV.

Is the video currently 16:9, or is it 16:9 within a 4:3 sequence? What I do when I make a DVD is just export a Quicktime Movie, and that will be a multi GB file usually and then bring that into DVDSP. DVDSP will do all the encoding as far as what format to go into. BUT, someone will most definitely come on here and tell you to export using compressor and have it do the encoding. EVERYBODY has their own way of doing it, those are just two.
Good luck,
-Brian

Exporting for Dvd Studio Pro

im trying to export students projects in my lab, what steps do i need to do to get them to work efficiently in Dvd Studio Pro. they are all on there own external harddrives.

I think we need a bit more detail.
Are you exporting footage from FCP?
If so, you should look to encode it to MPEG2 before bringing it in to DVDSP if you want to have control over the encoding process. You could use Compressor, or you could use any other encoder that you wish, as long as it produces elementary streams for DVDSP.
You could export from FCP using the Quicktime conversion OR the Compressor option.
You might choose to do neither and simply use the .mov file in DVDSP and let DVDSP handle the encoding as you work (in the background) or when you build.
Some more info would help

Export 16x9 Anamorphic for DVD Studio Pro for TV

My movie is 16x9 Anamorphic DV on a 3:2 Anamorphic timeline... I want to export the movie in the highest possible quality for a DVD made in DVD Studio Pro. This DVD is for view on TV.
What is the best way to do this? Meaning the way most indie filmmakers would do it for a festival DVD?
Thanks

what is the exact audio option that I should be selecting in compressor? I do not see ac3? Closest is AAC 128kbps. Where are the correct audio options located in compressor? They are not under DVD 90 Folder... Thanks

Exporting from FCE for DVD Studio Pro

I'm wondering what the best way is to export a video (approx 90 mins) from Final Cut Express HD to use to make playable DVDs using DVD Studio Pro on a different computer. Dual-layer DVDs are an option if there's no way to do this under 4.7 GB, but I'm interested in all my options. Thanks!

Hi(Bonjour)!
What about an external hard drive to save your exported self contained movie?
Switch the drive to computer with DVDSP.
Michel Boissonneault

What happened to MPEG2? How to prepare material in FCP for DVD Studio Pro?

I have made DVDs using DVD Studio Pro before when usig a manual that my teacher had put together. It all worked fine. After preparing my videos on FCP I exported the material "Using Quicktime Conversion" and selected MPEG2. But thats no longer an option! How do I go about burning DVDs now?
Hope someone have time to answer.

Either:
- export to Compressor, select your settings from its options then drag the generated video and audio files into DVDSP
or
- export a quicktime file using 'current settings' and drag that directly into DVDSP. DVDSP uses Compressor internally to generate the audio and video files.
If you decide to let DVDSP do the encoding, you need to read through the manual to find the section where you set the bitrates and output files.
x

Export For DVD Studio Pro

What's the best export setting for an iMovie that I will be including on a DVD-SP project. I posted a similar question in the DVD-SP forum and was told to use MPEG-2 as my export setting under the "Expert Settings" tab. However, I didn't see this as an option. What's the best setting to use for a DVD project. I was under the impression that MPEG-2 is the standard for DVD but don't know what to do to get that quality from iMovie.

Well what -I- would do is a FULL Quality DV export from iMovie then use Compressor to encode to MPEG-2. Compressor gives you a lot more options and (arguably) better quality.
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
http://iMovie.danslagle.com

What is the best format for DVD studio Pro when you have a lot of content?

I have to make a SD DVD and I have a lot of content trying to fit as much as possible on one DVD yet still maintain the quality. I made a beautiful h.264 to find out that it isn't compatible. Suggestions..
Message was edited by: jennafwd

How long is your program? How many menus do you plan to have?
Have you used one of the DVD presets in Compressor to create the needed .m2v video file and AC3 audio file for use in DVD-SP? If so, which preset? If you customized a preset, what bit rate settings did you use?
-DH

What format to export fcdp project recorded on sony z1 for dvd studio pro

Similar Messages

Maybe you are looking for