What gamut/backlight settings do I use to calibrate mid 2010, 27in iMac with Spyder 4 elite?
wide/normal gamut? Fluorescent ccfl, White LED, RGB LED?
See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.
Similar Messages
-
What color calibration tool do I use to calibrate my MacBook Pro screen in order to get accurate color when I print my photos?
This what I have been trying...... Maybe my eyes are screwed up or don't understand the process....
What I have been trying to do is squint and make the apple disappear by moving the sliders around in each step. Is that correct? -
I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?
Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.
-
Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?
3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O. -
How can I use Aperture 3 on my new iMac with Maverick?
How can I use Aperture 3 on my new iMac with Maverick?
Do you own a copy of Aperture, perhaps bought for another Mac?
If you have not bought Aperture, you need to buy it from the AppStore.
But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac. Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac. Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
Léonie -
"Can I use Logic Pro in my new imac with 2.66 intel core 2 duo"
Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
I have a 002 rack from digidesign, that should be good running with a logic pro 8 DAW.Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
Yes. Click here for more information.
(40435) -
I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.
That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
Your only options are to use something like ScreenRecycler mentioned above.
~Lyssa -
Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from
In addition to the other suggestions, see:
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html -
I use FCP 7 Studio on an iMac with Snow Leopard (10.6.8). If I upgrade to Lion so I can use iCloud, can I still use FCP 7?
Thanks X! I use Office 2011 as this iMac is only a year old. I don't have Rosetta (is it an add-on?) at least, I've never seen it... so... you're saying I could upgrade to Lion with no ill effect to my FCP7 Studio and all it's files and my saved projects?
z -
What APN and settings do I use the iPad 2 T Mobile 3G connectivity
hello got my nano SIM from my iPad 2 from T Mobile and I like to know what are the APN settings I should use I can get 3G connectivity.
Once you insert a T-Mobile sim, the APN settings will then show up.
Enter
epc.tmobile.com
That is all you need. -
Hi All,
I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
What are relative speeds of USB vs. Firewire vs. eSATA ?
I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
ThanksJim Bogy wrote:
...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals. -
Is it possible to use Snow Leopard on Mountain Lion iMac with Virtualbox ?
I've been lucky recently, with people giving the perfect solutions for me so I try again.
But, this one is a tough one: How to run a virtual Snow Leopard on a new iMac ?
I got a 2013 iMac with Mountain Lion (10.8.5 now) so, totally incompatible with Snow Leopard. I need SL anyway.
Give up all you old applications and buy new ones is not acceptable. First, this is not my way of thinking and, second, some cannot be replaced.
Many posts say that you can use Snow Leopard with VirtualBox but I could not find anywhere the "how to" (in this particular configuration).
For instance, I followed these 2 protocols, almost similar:
http://www.maketecheasier.com/install-mac-os-x-snow-leopard-in-virtualbox-on-win dows/
http://www.macbreaker.com/2012/02/snow-leopard-virtualbox.html
but they use Windows as host system and something is not working (for me) with Mountain Lion.
I made many attempts, with VirtualBox 4.2.18, using pretty much everything: Snow Leopard DVD, SL Server DVD, .dmg of both. I've also got Combo 10.6.8 updates for both (but I'm not sure if it can be used before installing). With another MacBook, I managed to install a SLS on external hard drive and update to 10.6.8. Was unable to use it anyway.
Inevitably, I ended up with the message:
"FATAL: No bootable medium found! System halted."
I have no idea of what support to use and even, probably important, if it should be set on Primary or Secondary Master ? (in Settings / Storage)
Is it possible at all ???
Would it work better with VMware Fusion ? Anybody successful ?
Help
ThanxHow to install and run OS 10.6 Snow Leopard on a virtual machine on top of OS 10.7 Lion:
http://osxdaily.com/2011/11/17/install-run-mac-os-x-10-6-snow-leopard-in-virtual -machine-on-lion/
From kappy:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc. Insert the disc into the
optical drive and restart the computer. After the chime press and hold down the
"C" key. Release the key when you see a small spinning gear appear below the
dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, set the format type to Mac
OS Extended (Journaled, if supported), then click on the Partition button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will require a restart after
which you will be running a fresh install of OS X. You can now begin the update
process by opening Software Update and installing all recommended updates to
bring your installation current.
First you will have to prep your new SSD:
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. -
This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?
-
I have been recording using a line 6 UX2 interface and also, a Focusrite iTrack Solo interface, successfully with Logic 9 on my 2007 MBP for a few years now. I recently bought a new iMac and migrated my time machinre back up to the iMac. Since then I have had to maunually replace missing sound and room evironment files, and now I cannot get a clean mic recording using either interface or either of my two mics.
Any suggestions?
Perplexed in NYCI assume you have an iMac with a fusion drive? If so, contact Apple. Audio dropouts on these machines even occur in iTunes.
-
For uml 295 what should the settings be, for use with windows 7?
I have a uml 295 mobile broadband device. About 90% of the time even though the device says it is connected, when I try to access the internet I get a message that says "no internet connection". I have a windows 7 operating system. I wonder if the settings on the device are wrong? I didn't change any defaults or enter any other information under "settings". Do I need to do something else to make this work?
I don’t get an error message. The broadband manager says that I’m connected and the timer is running. But Internet explorer says “you are not connected to a network.”
I wouldn’t describe this as “losing” the connection. After I click on “Connect”, the manager says it is connected but IE says I am not connected to a network, and mail program says it can’t contact servers.
I have 2 dell laptops with very similar factory supplied software (windows 7, McAfee antivirus) and the same thing happens on both computers. I have a Novatel wireless broadband device that works great on both of these Dell laptop computers.
I tried the UML295 on my Dell desktop and it seems to work fine there. But that’s not where I want to use it. Maybe the Dell laptops have some software properties that are incompatible with this device.
Maybe you are looking for
-
First time editing a project with HD, and then burning it to Blu-ray
Hey there everyone. *Newbie to HD editing alert. I have two problems regarding HD editing/export. I've been scouring the forums for several days, and I can't find a specific answer to what I need/want to know. Some things are understandable to a degr
-
Itunes keeps saying it has stopped working when on internet or in itunes
When I open itunes store and sometimes itunes when connected to the internet it comes up with " i tunes has stopped working" A problem caused the program to stop working correctly. Windows will.... Then the only thing you can do is click - close prog
-
How to check whether follow on document is created for sc or po,is there any table or fm available?
How to check whether follow on document is created for sc or po,is there any table or fm available?
-
Hi, I have to send the data to outbound file adapter. My message contains the Vendor Name. Can I create the file name dynamically by using the vendor name which is available inside the message? Please treat this as very urgent. Thanks Mohan
-
Is this type of set-up possible - private and public network with Airport
We have an office network with Airport. We have internet with a cable modem with routers plugged to it. The network is not now shared with anyone outside the business. But would it be possible to add a public component to our setup that would give ot