What goes on with this crap ?
on all my mac's: imac 27"i7, mini i7 and 17" mbp i7 safari is unresponsive for scrolling typing etc. and as long safari is active also other apps are infected ...
activity monitor shows 70-100% webprocess ..
all this with 10.8.3
before, with lion no problems at all !
Sounds like a bad Flash plug-in. Although it could be any of the internet plug-ins, I've seen similar posts that implicate older versions of the Flash plugin.
To quickly check the plugins, open /Library/Internet Plug-Ins and move the plug-ins into another location, like a folder on your desktop. Start Safari and see if you still have the problems. If they are gone, you need to figure out which plugin is the problem. If they are still there, move them back.
Similar Messages
-
Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/ -
Does anyone know why this is happing?
Hello LindaHarp,
It sounds like you are listening to iTunes Radio and it stops shortly after you start listening. I recommend starting by signing out of your iTunes account in Settings > iTunes & App Stores. Then close all the running apps on the device:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue by signing back in to your account, and testing again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the best,
Sterling -
I really dont know what else to add.
Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
*Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords. -
Whats going on with Sherlock?
Seems like none of the Sherlock channels are working. Whats going on with this app?
Hi Cacker,
Yes, myself I had to trash Sherlock's Caches every two hours or so in order to make it work with Mac OS X 10.4.2.
—> Now since I updated to 10.4.3, it works like a charm.
I don't know if it is because of the update itself, or because I
- cleaned all Caches, including System Caches,
- ran the three Periodic tasks, and performed a
- disk repair with Disk Utility and a
- directory repair with DiskWarrior,
right before the update.
Anyway, make the OS Update the way I did it (Software Update, menu option "Install & Keep Package"), with the precautions above, and see if your Sherlock then works as perfectly well as mine afterwards?
Good luck!
Axl -
What is going wrong with this config ??
Hello guys,
I am busting my head to find out what is going wrong with this config and cant figure it out since i am not an advanced cisco technician.
Problem is that i cant access the 94.70.142.127 server that is supposed to be in a DMZ zone.
I know it is a bit chaotic but would really appreciate any help since i am running on a deadline.
I am building the config step by step and although it seems to be working access to the server all of the sudden is denied.
No idea if its a NAT issue a firewall issue or a security audit issue.
There are 3 vlans.
Vlan 1 is the inside network.
Vlan 2 is the DMZ server
Vlan 3 is the Management Network.
thanks in advance
Building configuration...
Current configuration : 11796 bytes
! Last configuration change at 11:28:33 PCTime Fri Jan 4 2013 by admin
! NVRAM config last updated at 11:27:51 PCTime Fri Jan 4 2013 by admin
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime
service password-encryption
service sequence-numbers
hostname R1
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 8
logging message-counter syslog
logging buffered 4096 informational
enable secret 5 $1$oT7y$BwhdEjMJfAaTQI3dzDVwP.
no aaa new-model
memory-size iomem 10
clock timezone PCTime 2
clock summer-time PCTime date Mar 30 2003 3:00 Oct 26 2003 4:00
crypto pki trustpoint TP-self-signed-2567543707
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2567543707
revocation-check none
rsakeypair TP-self-signed-2567543707
crypto pki certificate chain TP-self-signed-2567543707
certificate self-signed 01
30820244 308201AD A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32353637 35343337 3037301E 170D3133 30313032 30383431
35335A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 35363735
34333730 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100ABA4 B7FFF4F1 9FBE79D8 2CEBCA68 A14BE3AB DBF770C2 EB35A954 B271AE3E
F8485837 F2E8566B 66E5EF6B BCFCDFA3 8F6F91F3 FD8E3015 879A67F5 85DD95F5
C26875C0 2202CA6C CE95888F 545AB4F6 6F708A0E C65E78D1 60967480 5589F5EE
80505E46 8767CE2C 37C994FE AB555AF0 BA4C4679 63FF7641 34FFF6EF 3EC38006
46B90203 010001A3 6C306A30 0F060355 1D130101 FF040530 030101FF 30170603
551D1104 10300E82 0C52312E 646F636E 65742E67 72301F06 03551D23 04183016
8014F0DE 85318FB3 70C36B4A FEB4B0CA 446025F0 329C301D 0603551D 0E041604
14F0DE85 318FB370 C36B4AFE B4B0CA44 6025F032 9C300D06 092A8648 86F70D01
01040500 03818100 5D76D5F4 5FB659C3 1E5B3777 420E1703 CD019889 AE79390D
A2AA4D26 AD9913B4 B3292277 97ACACDD D7093465 78279B4D 5FAC0A21 EFBF3B74
6A25BC5B ACFB648F 08F92678 00BB495C 037DEAF7 C5910944 3D2C0643 EA19E9BD
0AFE5423 AADBB3C2 B2C94296 DABE0D3D 6438F7A8 32B0A92B 3E8E0D26 635070A3
ACF87E49 65A9E468
quit
no ip source-route
ip cef
no ip bootp server
ip domain name docnet.gr
ip name-server 195.170.0.1
no ipv6 cef
username admin privilege 15 view root secret 5 $1$Lny5$et1FhWOpIKOOYRUtN89H10
archive
log config
hidekeys
ip tcp synwait-time 10
ip ssh version 2
class-map type inspect match-any WebService
match protocol http
match protocol https
class-map type inspect match-all sdm-cls-sdm-pol-NATOutsideToInside-1-1
match class-map WebService
match access-group name WebServer
class-map type inspect match-all ccp-cls-sdm-pol-NATOutsideToInside-1-1
match access-group name Spoofing
class-map type inspect match-any CCP-Voice-permit
match protocol h323
match protocol skinny
match protocol sip
class-map type inspect match-any tcp-udp
match protocol http
match protocol https
match protocol dns
match protocol icmp
class-map type inspect match-all ccp-cls--3
match access-group name mng-out
match class-map tcp-udp
class-map type inspect match-all ccp-cls--2
match access-group name mng-self
class-map type inspect match-all ccp-cls--4
match access-group name mng-out-drop
class-map type inspect match-any ccp-cls-insp-traffic
match protocol cuseeme
match protocol dns
match protocol ftp
match protocol h323
match protocol https
match protocol icmp
match protocol imap
match protocol pop3
match protocol netshow
match protocol shell
match protocol realmedia
match protocol rtsp
match protocol smtp extended
match protocol sql-net
match protocol streamworks
match protocol tftp
match protocol vdolive
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-insp-traffic
match class-map ccp-cls-insp-traffic
class-map type inspect match-any http-https-DMZ
match protocol http
match protocol https
class-map type inspect match-all sdm-cls--2
match class-map http-https-DMZ
match access-group name web_server
class-map type inspect match-any MySQLService
match protocol mysql
class-map type inspect match-all sdm-cls--1
match class-map MySQLService
match access-group name DMZtoMySQL
class-map type inspect match-any ccp-cls-icmp-access
match protocol icmp
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-icmp-access
match class-map ccp-cls-icmp-access
class-map type inspect match-all ccp-invalid-src
match access-group 100
class-map type inspect match-all sdm-nat-https-1
match access-group 102
match protocol https
class-map type inspect match-all ccp-protocol-http
match protocol http
policy-map type inspect ccp-permit-icmpreply
class type inspect ccp-icmp-access
inspect
class class-default
pass
policy-map type inspect sdm-pol-NATOutsideToInside-1
class type inspect ccp-cls-sdm-pol-NATOutsideToInside-1-1
drop
class type inspect sdm-cls-sdm-pol-NATOutsideToInside-1-1
inspect
class type inspect sdm-nat-https-1
inspect
class class-default
drop
policy-map type inspect ccp-inspect
class type inspect ccp-invalid-src
drop log
class type inspect ccp-protocol-http
inspect
class type inspect ccp-insp-traffic
inspect
class type inspect CCP-Voice-permit
inspect
class class-default
drop
policy-map type inspect ccp-permit
class class-default
drop
policy-map type inspect sdm-policy-sdm-cls--1
class type inspect sdm-cls--1
inspect
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--1
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--3
class type inspect ccp-cls--3
inspect
class class-default
drop
policy-map type inspect sdm-policy-sdm-cls--2
class type inspect sdm-cls--2
inspect
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--2
class type inspect ccp-cls--2
inspect
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--5
class class-default
drop
zone security out-zone
zone security in-zone
zone security dmz-zone
zone security mng
zone-pair security ccp-zp-self-out source self destination out-zone
service-policy type inspect ccp-permit-icmpreply
zone-pair security sdm-zp-NATOutsideToInside-1 source out-zone destination in-zone
service-policy type inspect sdm-pol-NATOutsideToInside-1
zone-pair security ccp-zp-in-out source in-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security ccp-zp-out-self source out-zone destination self
service-policy type inspect ccp-permit
zone-pair security zp-dmz-to-outside source dmz-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security zp-outside-to-dmz source out-zone destination dmz-zone
service-policy type inspect sdm-pol-NATOutsideToInside-1
zone-pair security sdm-zp-dmz-zone-in-zone source dmz-zone destination in-zone
service-policy type inspect sdm-policy-sdm-cls--1
zone-pair security sdm-zp-in-zone-dmz-zone source in-zone destination dmz-zone
service-policy type inspect sdm-policy-sdm-cls--2
zone-pair security sdm-zp-dmz-zone-self source dmz-zone destination self
service-policy type inspect ccp-policy-ccp-cls--1
zone-pair security sdm-zp-mng-self source mng destination self
service-policy type inspect ccp-policy-ccp-cls--2
zone-pair security sdm-zp-mng-out-zone source mng destination out-zone
service-policy type inspect ccp-policy-ccp-cls--3
zone-pair security sdm-zp-out-zone-mng source out-zone destination mng
service-policy type inspect ccp-policy-ccp-cls--5
interface Null0
no ip unreachables
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
encapsulation hdlc
shutdown
isdn termination multidrop
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no atm ilmi-keepalive
interface ATM0.1 point-to-point
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
pvc 8/35
pppoe-client dial-pool-number 1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
switchport access vlan 3
spanning-tree portfast
interface FastEthernet3
switchport access vlan 2
interface Vlan1
description $FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
zone-member security in-zone
ip tcp adjust-mss 1412
interface Vlan2
description $FW_INSIDE$
ip address 192.168.1.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
zone-member security dmz-zone
interface Vlan3
description $FW_INSIDE$
ip address 10.0.10.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
zone-member security mng
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip flow ingress
ip nat outside
ip virtual-reassembly max-reassemblies 64
zone-member security out-zone
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 7 0918425001505245
ppp pap sent-username [email protected] password 7 13511B4B1359417D
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.0.10.0 255.255.255.0 Vlan3
no ip http server
ip http secure-server
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static 192.168.0.101 94.70.142.113
ip nat inside source static 192.168.1.102 94.70.142.127
ip access-list extended DMZtoMySQL
remark CCP_ACL Category=128
permit ip host 192.168.1.102 host 192.168.0.101
ip access-list extended Spoofing
remark CCP_ACL Category=128
permit ip 10.0.0.0 0.255.255.255 any
permit ip 192.168.0.0 0.0.255.255 any
permit ip 172.16.0.0 0.15.255.255 any
ip access-list extended VTY_incoming
remark CCP_ACL Category=1
permit ip host 10.0.10.2 any
ip access-list extended WebServer
remark CCP_ACL Category=128
permit ip any host 192.168.1.102
ip access-list extended mng-out
remark CCP_ACL Category=128
permit ip 10.0.10.0 0.0.0.255 any
ip access-list extended mng-out-drop
remark CCP_ACL Category=128
permit ip any any
ip access-list extended mng-self
remark CCP_ACL Category=128
permit ip any any
ip access-list extended web_server
remark CCP_ACL Category=128
permit ip 192.168.0.0 0.0.0.255 host 192.168.1.102
logging 10.0.10.2
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 remark VLan 1 Access
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 remark VLan 3 Access
access-list 1 permit 10.0.10.0 0.0.0.255
access-list 1 remark Vlan 2 Access
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 100 remark CCP_ACL Category=128
access-list 100 permit ip host 255.255.255.255 any
access-list 100 permit ip 127.0.0.0 0.255.255.255 any
access-list 102 remark CCP_ACL Category=0
access-list 102 permit ip any host 192.168.0.101
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner login ^CWARNING!!!This is a highly monitored private system. Access is prohibited!!^C
line con 0
no modem enable
line aux 0
line vty 0 4
access-class VTY_incoming in
password 7 12292504011C5C162E
login local
transport input ssh
scheduler max-task-time 5000
ntp authentication-key 1 md5 10603D29214711255F106B2677 7
ntp authenticate
ntp trusted-key 1
ntp master 2
endHello karolos,
Here is the thing.
You said you are trying to access 94.70.142.113 and that is a server on the DMZ but based in your configuration that is not true
ip nat inside source static 192.168.0.101 94.70.142.113
So 192.168.0.101 is on Vlan 1 witch is the in-zone
interface Vlan1
description $FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
security in-zone
If you got confused with the security zone that the host is assigned to then just add the following and it should work
ip access-list extended WebServer
permit ip any host 192.168.0.101
Regards -
I was charged by adobe, but cannot download or use product. There is no proof of my purchase in my profile but the money is not in my account. What is going on with this situation?
Hi there
Please check that you are signing in with the same Adobe ID/email address you used to make the purchase.
If you need further assistance, please message me.
Kind regards
Bev -
My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others have the same problem.
Just got the same error message today. My phone went to the black screen of death with the error message at the top. Contacted Verizon via chat. Was online for 1 hour and 15 minutes only to find out that nothing could be done which I could have told them based upon what I had read on this site. Of course my phone is out of warranty since I have had it for 1 1/2 years and I am not eligible for an upgrade. How convenient! I was told to contact Nokia which I did and they gave me a download to try to reset everything. It looked like it was working but after almost 3 hours it got to the end and nothing happened. It just froze even though it said it was done. I rebooted the phone and am back at the same black screen of death. Guess I have to buy a used phone and then will have to reconsider whether or not to stay with Verizon going forward. I have not had any issues with the phone in the past - keep it in an otter box, never dropped, never got wet, etc. But all of a sudden it goes haywire like this that seems like either a hardware or software problem but something completely out of my control and all I get is sorry, you're out of warranty!
-
EE What is going on with this outage? This is on a national level 27.07.15
HI,There needs to be an answer from EE what the hell is going on with this national outage? its been down roughly since midnight (27/07/15).This is not good enough from a mobile network provider, and to make things worse you have no way of communicating this issue to your customers.
Just because you aren't affected, doesn't mean there isn't a problem?
My wife and I have a shared account, mine doesn't work, hers goes. This has been a problem since Friday for me. 2nd Line have acknowledged an issue. After an update they pushed on Friday to an undisclosed amount of users on the network. I can't dial 150 from a PAYG or a colleagues PAYM phone. See the other thread, posted into.
Coincidence?
The issue is with No Service displayed on phone, a sim registration issue. Not no signal or other (though may be interpreted as no signal to the layman). -
I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing
Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder. -
I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???
This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPHardwareDataType | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | grep -v 'ag$' | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`find -L {/,}L*/Lau* -type f -exec sh -c 'file -b "$1" | grep -qw XML' {} {} \; -print | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`find -L /{S*/,}L*/Star* -type f -exec sh -c 'file -b "$1" | egrep -q "XML|bin|exec"' {} {} \; -print`; Pm "StartupItems"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hey! What's Up With THIS!?
I've been working on a Keynote Presentation for some time now.
Once I added the iCloud.
The system kep going into Storage Mode every 3-4 click on the keyboard or mouse.
So I decided to shut the iCloud down from my computer.
Oh Yeah... Here's the FUN Part.
The system stated 'IF I did..... Everything loaded into theiCloud would be removed from my computer
(MacBook Pro).
So soon after (I obviously didn't disconnect the iCloud, can't afford to losse 'who knows what')
So soon after I went into my iPhone to turn it off as well...
There I received the message/question "Do you want items left on your iPhone?"
Huh! I didn't even receive that option on the Mac.Sweet! Thank You Very Much!
You should be a Tech!
You explained it as simple as any Apple Tech I've spoken to.
I'm in Alaska.
We just received our first Apple Store 2 months ago.
During their third week of operation, I mistakenly walked in assuming it was a
contract Apple store (I heard a New branch/store of an Apple sub had opened a new store in
Anchorage). Needless to say, I bet I took 15 -20 classes in that week. Tuesday through Monday.
Yep! I cancelled everything and just nailed everyone I could.
I live near Fairbanks approximately 7+ hrs away.
I had never had any instruction on Apple/Mac since becoming a PC convert just before Christmas of 2008.
The Crew of Trainers Apple brought in, and New one's still in training are Exceptional!
I've been like a five year old with a Ferrari until these Awesome Folks and Kids trained me in at
That Apple Store. They even assisted me in tweeking a Keynote Presentation prior to going into a 6 day
Engineering Show also in Anchorage three weeks ago. -
What is wrong with this code? on(release) gotoAndPlay("2")'{'
Please could someone tell me what is wrong with this code - on(release)
gotoAndPlay("2")'{'
this is the error that comes up and i have tried changing it but it is not working
**Error** Scene=Scene 1, layer=Layer 2, frame=1:Line 2: '{' expected
gotoAndPlay("2")'{'
Total ActionScript Errors: 1 Reported Errors: 1
ThanksIf you have a frame labelled "2" then it should be:
on (release) {
this._parent.gotoAndPlay("2");
or other wise just the following to go to frame 2:
on (release) {
this._parent.gotoAndPlay(2);
You just had a missing curly bracket... -
I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
I can't figure out what's wrong with this code
First i want this program to allow me to enter a number with the EasyReader class and depending on the number entered it will show that specific line of this peom:
One two buckle your shoe
Three four shut the door
Five six pick up sticks
Seven eight lay them straight
Nine ten this is the end.
The error message i got was an illegal start of expression. I can't figure out why it is giving me this error because i have if (n = 1) || (n = 2) statements. My code is:
public class PoemSeventeen
public static void main(String[] args)
EasyReader console = new EasyReader();
System.out.println("Enter a number for the poem (0 to quit): ");
int n = console.readInt();
if (n = 1) || (n = 2)
System.out.println("One, two, buckle your shoe");
else if (n = 3) || (n = 4)
System.out.println("Three, four, shut the door");
else if (n = 5) || (n = 6)
System.out.println("Five, six, pick up sticks");
else if (n = 7) || (n = 8)
System.out.println("Seven, eight, lay them straight");
else if (n = 9) || (n = 10)
System.out.println("Nine, ten, this is the end");
else if (n = 0)
System.out.println("You may exit now");
else
System.out.println("Put in a number between 0 and 10");
I messed around with a few other thing because i had some weird errors before but now i have narrowed it down to just this 1 error.
The EasyReader class code:
// package com.skylit.io;
import java.io.*;
* @author Gary Litvin
* @version 1.2, 5/30/02
* Written as part of
* <i>Java Methods: An Introduction to Object-Oriented Programming</i>
* (Skylight Publishing 2001, ISBN 0-9654853-7-4)
* and
* <i>Java Methods AB: Data Structures</i>
* (Skylight Publishing 2003, ISBN 0-9654853-1-5)
* EasyReader provides simple methods for reading the console and
* for opening and reading text files. All exceptions are handled
* inside the class and are hidden from the user.
* <xmp>
* Example:
* =======
* EasyReader console = new EasyReader();
* System.out.print("Enter input file name: ");
* String fileName = console.readLine();
* EasyReader inFile = new EasyReader(fileName);
* if (inFile.bad())
* System.err.println("Can't open " + fileName);
* System.exit(1);
* String firstLine = inFile.readLine();
* if (!inFile.eof()) // or: if (firstLine != null)
* System.out.println("The first line is : " + firstLine);
* System.out.print("Enter the maximum number of integers to read: ");
* int maxCount = console.readInt();
* int k, count = 0;
* while (count < maxCount && !inFile.eof())
* k = inFile.readInt();
* if (!inFile.eof())
* // process or store this number
* count++;
* inFile.close(); // optional
* System.out.println(count + " numbers read");
* </xmp>
public class EasyReader
protected String myFileName;
protected BufferedReader myInFile;
protected int myErrorFlags = 0;
protected static final int OPENERROR = 0x0001;
protected static final int CLOSEERROR = 0x0002;
protected static final int READERROR = 0x0004;
protected static final int EOF = 0x0100;
* Constructor. Prepares console (System.in) for reading
public EasyReader()
myFileName = null;
myErrorFlags = 0;
myInFile = new BufferedReader(
new InputStreamReader(System.in), 128);
* Constructor. opens a file for reading
* @param fileName the name or pathname of the file
public EasyReader(String fileName)
myFileName = fileName;
myErrorFlags = 0;
try
myInFile = new BufferedReader(new FileReader(fileName), 1024);
catch (FileNotFoundException e)
myErrorFlags |= OPENERROR;
myFileName = null;
* Closes the file
public void close()
if (myFileName == null)
return;
try
myInFile.close();
catch (IOException e)
System.err.println("Error closing " + myFileName + "\n");
myErrorFlags |= CLOSEERROR;
* Checks the status of the file
* @return true if en error occurred opening or reading the file,
* false otherwise
public boolean bad()
return myErrorFlags != 0;
* Checks the EOF status of the file
* @return true if EOF was encountered in the previous read
* operation, false otherwise
public boolean eof()
return (myErrorFlags & EOF) != 0;
private boolean ready() throws IOException
return myFileName == null || myInFile.ready();
* Reads the next character from a file (any character including
* a space or a newline character).
* @return character read or <code>null</code> character
* (Unicode 0) if trying to read beyond the EOF
public char readChar()
char ch = '\u0000';
try
if (ready())
ch = (char)myInFile.read();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (ch == '\u0000')
myErrorFlags |= EOF;
return ch;
* Reads from the current position in the file up to and including
* the next newline character. The newline character is thrown away
* @return the read string (excluding the newline character) or
* null if trying to read beyond the EOF
public String readLine()
String s = null;
try
s = myInFile.readLine();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (s == null)
myErrorFlags |= EOF;
return s;
* Skips whitespace and reads the next word (a string of consecutive
* non-whitespace characters (up to but excluding the next space,
* newline, etc.)
* @return the read string or null if trying to read beyond the EOF
public String readWord()
StringBuffer buffer = new StringBuffer(128);
char ch = ' ';
int count = 0;
String s = null;
try
while (ready() && Character.isWhitespace(ch))
ch = (char)myInFile.read();
while (ready() && !Character.isWhitespace(ch))
count++;
buffer.append(ch);
myInFile.mark(1);
ch = (char)myInFile.read();
if (count > 0)
myInFile.reset();
s = buffer.toString();
else
myErrorFlags |= EOF;
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
return s;
* Reads the next integer (without validating its format)
* @return the integer read or 0 if trying to read beyond the EOF
public int readInt()
String s = readWord();
if (s != null)
return Integer.parseInt(s);
else
return 0;
* Reads the next double (without validating its format)
* @return the number read or 0 if trying to read beyond the EOF
public double readDouble()
String s = readWord();
if (s != null)
return Double.parseDouble(s);
// in Java 1, use: return Double.valueOf(s).doubleValue();
else
return 0.0;
Can anybody please tell me what's wrong with this code? ThanksString[] message = {
"One, two, buckle your shoe",
"One, two, buckle your shoe",
"Three, four, shut the door",
"Three, four, shut the door",
"Five, six, pick up sticks",
"Five, six, pick up sticks",
"Seven, eight, lay them straight",
"Seven, eight, lay them straight",
"Nine, ten, this is the end",
"Nine, ten, this is the end"
if(n>0)
System.out.println(message[n]);
else
System.exit(0);
Maybe you are looking for
-
Is there a way to turn off multiple desktops in lion?
since the apps can full screen i no longer need more than one desktop space. any help in disabling this feature is much appreciated.
-
I am testing a SSD (A-Data, SandForce Controller, > 260Mbytes/s read/write). I am using the e-sata connection with a dock. I am only getting 120Mbytes/s and wondering why. Any suggestions? Do I need to install the latest AMD drivers for the SB850
-
Where may i get the Cover screws for my MacBook Pro? I need the short and long ones.
-
After creating index query is taking more
Hello all, I am trying the following..and not getting why the query is taking more time after creating the index SQL> SELECT distinct version_no 2 FROM iefloa_data_anal 3 WHERE datetime_inserted > to_date('17-02-2004','dd-mm-yyyy'); VERSION_NO 999 El
-
Use maximum render quality option unavailable
CS 4.2.1, AME 4.2 I don' t see this option in AME setting (that little drop down on the right side). Anyway to enable it? Thanks!