What happen to the Apple Codecs?

All the Apple codecs in fcp 603 easy setup show up with HDV in front of them and are 1440hdv only.
At least under OSX 10.5.2 my OSX 10.4.11 box with fcp 603 displays every thing normally
Message was edited by: Doug Bassett

Are you sure that in your "easy setup" window, HDV is not selected in the "Format" menu ?

Similar Messages

  • What happened to the Apple open source software page?

    I have used a lot of the open source software that Apple listed on their website. The address used to be:
    http://www.apple.com/downloads/macosx/unix_open_source/
    But that just directs to a cheesy downloads page with links to app store, etc.
    Does anybody know what happend to this part of the Apple web site? Is it just moved and I'm too dumb to find it? I've tried to search these forums, and the googles, but nothing coherant comes through!

    This is the developer page though, and doesn't contain the wealth of applications that were hosted (and kept up to date). These included GIMP, carbon emacs, etc.
    I realize many of these are available from macports, or even by building from the source in many cases, but some of these programs seem to have been only hosted and updated from this page.

  • What happens when the Apple Configurator Certs Expire?

    So I was looking at some iPads I deployed sometime ago using Apple Configurator.  Last summer I brough them all in (about 220 units,) wiped them, used configurator to install iOS 5.1, all supervised, and named according to the Teacher they were given out to.  Haven't seen the iPads since.  Last few weeks I've had a few come back with misc problems and I noticed within the Supervision Profile the "Signing Certificate" and "Certificate" for Apple Configurator both expire on August 13, 2013.  What will happen on/after August 13, 2013 with these units? 

    From another site, I got a tip that if you use Keychain Access, double click on the AppleConfigurator (MAC address of machine) entry (it'll have a red X badge & the date it expired), open up the Trust disclosure triangle and set "When using this certificate"t o Always Trust. The red X badge changes to a blue + badge.

  • Retina or no? What happens after the apple care expires

    I am thinking of getting a pro.  Now ideally I'd want to have the retina. But since the memory and the SSD are soldered, what will happen if they break?  Especially after 3 years?  Do we have to pay for the whole motherboard?  I asked ppl in the store but they didn't know.  Memory might not go bad but I am not sure about the SSD after 3 years. I don't want to end up paying the whole thing except the screen after 3 years.

    I am thinking of getting a pro.  Now ideally I'd want to have the retina. But since the memory and the SSD are soldered, what will happen if they break?  Especially after 3 years?  Do we have to pay for the whole motherboard?  I asked ppl in the store but they didn't know.  Memory might not go bad but I am not sure about the SSD after 3 years. I don't want to end up paying the whole thing except the screen after 3 years.

  • What happened to the Apple M9876/LLA speakers?

    It appears they have been pulled off the market. Anyone have insight on this. I was going to buy one.

    With the right number, that comes up as "Apple® iPod™ Accessory - Hi-Fi Speaker System"
    Apple® iPod™ Accessory - Hi-Fi Speaker System at PersonalFile
    Discontinued after 1 year 8 months. Thats a long time for an iPod accessory.

  • I have a 2 ibook g4's this is the second one but I started it up and all that happens is the apple logo comes up on a white screen and then nothing happens what should I do?

    I have a 2 ibook g4's this is the second one but I started it up and all that happens is the apple logo comes up on a white screen and then nothing happens what should I do?

    Reinstall OS X.

  • What happened to the "closed tabs" list in 4.0 RC2?

    What happened to the "closed tabs" list in 4.0 RC2?
    In prior versions of Firefox, I could open a list of closed tabs, but I can't find the button now.

    Hi g,
    Many features have been lost in Numbers 3. You can send feedback to Apple with Menu > Numbers > Provide Numbers Feedback.
    And... playing the Devil's Advocate, have a look here:
    Features that Apple has promised to reinstate:
    http://support.apple.com/kb/HT6049
    Hints on workarounds here:
    https://discussions.apple.com/message/23622372#23622372
    What has been GAINED in Numbers 3 is here:
    https://discussions.apple.com/thread/5473882?start=75&tstart=0
    What has been lost in Numbers 3 is here (with corrections where Apple has already reinstated some lost features in the Numbers 3.0.1 update):
    https://discussions.apple.com/thread/5470448?start=240&tstart=0
    I enjoy running both versions of Numbers (Numbers 2 and Numbers 3) at the same time. They each have strengths and weaknesses.
    Numbers 3 did not replace your Numbers 2 (Numbers '09). Look in a folder called iWork '09 inside your Applications folder. And enjoy.
    Regards,
    Ian.

  • HT4918 what happen with the documents in Idisk, how can i see them in iCloud?

    what happen with the documents that i have in my idisk?? how can i move them into icloud??

    Welcome to the Apple Community.
    Unfortunately, iCloud does not offer equivalents to Mobile Me’s iDisk, Gallery or Web Hosting services. You will need to find a third party solution to replace these services. You might consider DropBox, SugarSync, MediaFire or any other service that offers online storage. (not all these alternatives offer all the services previously provided by iDisk)

  • What happens between the chime & the grey screen on boot?

    Hi,
    My Mac Pro has recently started taking up to 30secs to reach the grey screen when booting. The chime happens shortly after (re)starting, and then there's a significant pause, where nothing seems to happen (even the Apple Display stays in stand-by mode), before the HDD starts reading and the grey screen appears. I tried using Verbose mode, but the data it prints to screen doesn't start until after the long pause, so…
    Anyone know what the Mac Pro could be doing? I've no other problems with the machine.
    Thanks,
    S.

    Hi,
    My issue has been solved, apparently by a combination of a PRAM reset and re-selecting the startup disk in System Preferences. My machine now moves from chime to Apple logo almost instantaneously
    The AppleCare representative was thorough and walked me through various steps that narrowed down the issue, and his hesitant conclusion was that somehow, as hatter suggested, the Mac was taking its time to find the appropriate boot device - possibly as a result of a change I had made in my BootCamp partition (Windows 7) or as a result of a previous PRAM reset (as hatter suggested).
    Case closed! Yay!
    S.
    EDIT: So, Japamac, it was presumably the "system selection" part of the post-Chime process that was causing the delay. Didn't see your post till I returned to respond with this post, but thanks for the effort anyway
    Message was edited by: SiRGadaBout

  • What happened to the multi-touch gestures in Finder?

    I've updated to Lion last week.  Overall, I think what Apple did was great to the overall experience.  However, my only gripes are in Finder.  What happened to the multi-touch gestures?  The only thing that I can do is flip through files in cover view using two finger swipes.
    What happened to the pinch to zoom in and out?  I've seen other posts about this so I'll stop here.  Apple please bring this function back.  I'm tired of moving my mouse to the drag handle. 
    Secondly, I was using three finger swipes to navigate to the previous and next folder in Finder.   Since two finger is used to flip through cover view, I see why they couldn't extend the back/forward function to two finger swipes as they did in Safari and I know that three finger swipe is used to change desktops.  I wish that Apple was more creative to leave this function in somehow.
    Is there a way to bring these functions back to Finder?  These are the functions that I used all the time.

    That doesn't explain why they would remove the pinch to zoom in and out.  That is not be used by anything else in finder.  If I'm going through pictures, I would like to zoom in on the images for cover view.
    As far as the three figure swipes to go back and forth in finder, I understand why that has been removed.  However, Apple could have implemented the two finger swipe just like in Safari which is sensitive to the acceleration of the swipes.  If you swipe with two fingers somewhat fast, you can go back and forth between previous and next page.  If you swipe with two fingers slowly, you can pan left and right on the same page.
    They could have done something to retain the functionality versus taking out the functionality all together.  As of now, these functionalities do not exist.  I'm hoping that something is going to change and we'll have to see what the future brings.

  • Lost my iPod, remotely locked it through iCloud. What happens when the battery goes out?

    Hello!
    I lost my Ipod, but managed to locate and lock it remotely through Find my iPod and iCloud. It was located once, but hasn't been located again in the last four days. I think the battery may have run out. What happens when the battery is charged and the iPod turned back on? Does the lock and everything else that can be controlled with Find my iPod still apply?
    Thank you!

    Yes, because when you remotely lock the iPod via Find my iPod, the lock code is set as the lock code that you would use to unlock the iPod if you used a passcode normally. As long as the iPod is still connected to your Apple ID, Find my iPod should work as log as the iPod is connected to wifi.

  • What happens when the Time Machine drive is full?

    I'm on my second iMac. My first one (G5, 1984) died, and I replaced it early 2010 with an Intel mac. The transition when exceedingly well largely due to Time Machine. I just hooked the Time Machine drive to the new system, and I was soon back up running!
    My home folder has 70GB of data. The Macintosh drive has 105GB of data and 395GB free. The Time Machine drive has 220GB used and 30GB free.
    1. What happens when the Time Machine drive is full?
    2. Do I have control over what backups get deleted?
    3. If lightning strikes twice, will I still be able to restore my Intel mac like my G5 mac, even if backups get deleted?
    4. Is there anyway to control what backups/backup files get deleted?
    5. Any other thoughts?
    Thanks.

    maxseven wrote:
    i have deleted the time machine folders and they are now in my trash. when i try to secure empty my trash it will delete everything but the t/m folders. how do i delete them?
    Do you mean all of them? The entire Backups.backupdb folder?
    That's a large mess. First, even a normal delete will take a very long time, as there are probably hundreds of thousands, or even millions, of files. Your best bet by far is to simply erase them with Disk Utility -- that will only take a few moments. If your TM drive has a single partition, see #1 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html]. If there are other partition(s) on the drive, see #2 there.
    If not, and you only deleted some of the folders, you have a different, worse problem. Unfortunately, Apple doesn't do a very good job of warning folks: +*Never move, change, or delete anything in your backups via the Finder or Terminal.+*
    You shouldn't have to delete backups at all, since Time Machine will do that automatically when the disk/partition gets full. But you can do it without harm via Time Machine. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    A normal delete will take a very long time, as there are probably tens or hundreds of thousands of items, each of which must be individually deleted. A secure delete will take much, much longer, as each deleted file must be overwritten with zeros.

  • HT201317 What happened to the ADVANCED option on iCloud?

    Does anyone know what happened to the ADVANCED option on iCloud.com? I cannot delete my photo stream since Apple has removed that option and replaced it with NOTIFICATIONS.

    Jerome.Serpenti wrote:
    @Winston Churchill:  I hope you will not consider this a breach of your privacy, it was not so intended; but I had to smile at the 'bathroom Apple TV'.  I never considered an AppleTV might serve a function there!
    It's not a problem, indeed it's helpful, I'm aware it looks as though I'm here to argue, I just don't want others to get wrong information, it helps when others give their opinion.
    The bathroom TV, is a TV manufactured for a bathroom, it's a sealed unit, it meets all regulations and sits in the wall where it can be easily viewed while soaking in the tub. The Apple TV is also in the wall and is controlled by our phones, it's connected to an amplifier which is situated in the garage which in turn is connected to waterproof speakers in the bathroom ceiling. I did it all myself and am quite pleased with it.

  • What happened to the "options" button in iTunes 5?

    Hello -
    I just upgraded from a 4G 20G to a 60GB. Now I want iTunes to not transfer unchecked songs.
    What happened to the options button that used to reside at the bottom of iTunes? And where do I control iTunes to not transfer unchecked songs?
    Thanks in advance.

    Nevermind, I finally found the tab. Silly Apple...

  • What happened to the 30 inch Cinema display?

    What happened to the 30 inch Cinema display?
    I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
    I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
    Any suggestions, for a 30 inch display?

    No suggestions, apart from changing to a non-Apple display such as a LaCie one.
    I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
    1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
    2. we have gotten used to 30" and do not want to downgrade.
    I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
    I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
    Suzanne

Maybe you are looking for

  • Is there a way to capture video of what you do in preview window

    i find it fascinating to toggle rapidly forth on a scene in the preview window. is there any way that i could capture this rapid backwards and forwards movement on video?

  • TS1424 I have been Charged twice for an app

    I was charged twice for an app- iPad and iPhone. Anyone know how to get one credited?

  • Java FX 2.2 WebEngine

    Hi everyone, I'm using WebEngine and WebView classes for manipulating with html pages (JavaFX 2.2). As far as I know, there is embedded WebKit browser underneath. I would like to change parameters for WebKit like User-Agent, ... Is there any possibil

  • FM CONVERT MMYY TO MMYYYY

    Hi, We have an interface from other system with AS400 and DB2, one of the field has the data type number 4.0 with this information MMYY. But in sap we need have YYYYMM. I am seeing  the problem is in convert YY to YYYY. Someone knows some funtion mod

  • Partial Page Rendering - Refresh Column Value

    Hi OAF Gurus, I created a create page and followed the tutorial on Partital page Rendering creating a PVO view object and I am able to render the "EmployeeNumber" / "Location" column true OR false based on the value of another feild (Area Monitored).