What happen when printing hyper black?

Hi all
Imagine you start a new document...after create any element and fill it using C=100, M=100, Y=100 and K=100. In the Illustrator preferences I have set output blacks accuratelly. So we will have 100% of colors at all the plates in press.
Ok..this is my question: Why would occur when printing this element hyper black? Would it "crash" the paper because it´s to much concentration of ink? or what?
It´s a question about graphic production..not how to do do anythin in Illustrator.
Thank you a lot
See.

It might be that nothing would happen; for example, if the four seps were not printed on the same press run. Suppose the four color job was run on a two color press, with plenty of drying time between runs.
More than 300% ink coverage is not really uncommon. Spot varnish is often printed over areas already pushing the recommended total ink coverage limit; but again, that's on a separate press run after adequate drying time. Same goes for spot inks, like opaque metallics.
JET

Similar Messages

  • What happens when Hyper-V replication is paused

    Hi,
    Could someone please point me in the direction of detailed technical information regarding what happens when replication is paused for a Hyper-V VM?   I've had a dig around but not found anything..
    Does the source system still generate delta's which accumulate on disk somewhere, ready to be sent to the target once replication is resumed in a similar way to SQL log shipping, or is the whole processes paused and a new replication cycle started?
    I need to asses the impact of pausing replication on a number of VM's for an extended period (probably in the region of 4-6 hours) for maintenance on a host, where there is fairly limited replication bandwidth.
    Many thanks.

    Hi EntArch2012,
    You can pause the replication between primary and replica server .
    There will be a .HRL file beside the VHD file of the VM which enabled replica .
    After you enabled replica successfully , the changes of the VHD will be stored in the HRL file then send to the replica server regularly  to achieve synchronization .
    Hope this article is helpful :
    http://www.microsoft.com/en-us/download/details.aspx?id=29016
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • What happens when the multiply effect is applied to both the object and the graphic within?

    Hi everyone,
    I could really use some help with this...
    I'm getting a booklet ready to be printed. Originally, half of the pages were to be printed on paper with a (physical) colour. For budget reasons however, I've now decided to print the paper colour, and have the content of the pages overprinted on the tint in the background, which I've applied to the pages in the background of an additional master page.
    When I set the objects to multiply, they blend with the background colour, which is the effect I'm looking for, as there would be no 'paper white' on the pages that I want to appear as though printed on coloured paper.
    There's something confusing me though; you can also set the graphic within the object frame to multiply. This makes the graphic appear darker, which I don't really understand, since there is no extra colour within the graphic that accounts for this. I've looked at the output in the resulting pdf, and it looks like it's not just an on-screen effect, but the extra amount of (in this case) yellow would also be visible in the printed result.
    Does anyone have an explanation for this? Please see the graphic for a visual example.
    Thanks in advance, kind regards
    Robbin

    Hi.
              Yes. There is a heartbeat mechanism between all cluster members so they detect when a
              member has left the cluster. The primary server recognizes when it's secondary server
              has failed, and then proceeds to search for another member of the cluster to make as
              it's new secondary.
              Regards,
              Michael
              David Whitehouse wrote:
              > I'm trying to figure out what happens when the server holding the replicated state
              > for an object fails.
              > Does the server with the primary object (or the replica-aware stub) recognize
              > the failure and select a new
              > server to hold the replicated state?
              >
              > For instance, Assume I have a cluster defined with three servers - 1,2,3 - with
              > an instance of object A on server 1
              > and the replicated state ino on server 2. What happens if server 2 fails? Is the
              > state now replicated to server 3?
              >
              > Thanks, David
              Michael Young
              Developer Relations Engineer
              BEA Support
              

  • HT1657 What happens when you rent movies and they don't play? How come that question is not on the list?

    What happens when you rent movies and they don't play and you tried getting credit for it?  I rented two movies which they were very very old movies in black & white and they both don't play.  I never had this problem before even when downloading videos. Now how can I get credit for it?  I contact itunes a number of times and no one has done nothing as of yet.  Itunes also asked me for my order number which I sent them but still no credit.

        Great question MommaBof4! This is actually something that can be completed. VZW does have the option to turn this feature on or off based upon the users request. If you would like to update this feature on your device please give us a call by dialing *611 send from your VZW device, thanks!
    MatthewS_VZW
    Follow us on Twitter @VZWSUPPORT

  • What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod?

    What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod? I did this some time ago. On screen was shown available space somewhat less than 120 GB, but maybe somewhere between 10 and 20 GB more in the library. I had to get the iPod updated anyway, so I did proceed. However, afterwards the total content of the library was only about 110 GB. Now I wonder what did actually happen. Was the first sign only corrected for double copies of the same files or lost files or where files deleted from iTunes? And if files where deleted from iTunes, were they also deleted from my computer?

    Same as you would if you bought a pc; copy everything from your old computer to your new one.  Then you can just sync everything from the new computer, as you did with the old one.

  • What happens when multiple users access the same servlet?

    Do the users share all the same resources? Or is a new process generated for each user? I have a servlet that builds a string to return to the user and I only have myself to test, so I can't really see what happens when many users access the servlet. Is there a possibility that the string will get screwed up, like when dealing with multiple threads, or do all the users get their own resources and I don't have to worry about that?

    huh? if you can point a test servlet at it, you can point a browser at it (even if the servlet does not serve html it will run)
    try pasting the servlet URL into a web browser
    refreshing multiple browsers repeatedly could provide a manual test

  • I want to change my Apple ID because I have a new email address, but what happens when someone tries to facetime me using my old Apple ID?

    I want to change my Apple ID because I have a new email address, but what happens when someone tries to facetime me using my old Apple ID? Will they still be able to contact me on facetime using my old Apple ID?

    Not if you change the ID.  You would need to give them the new address.

  • I recently downloaded Parallels 9 to my imac so I could install Windows 7 Home Premium and had no trouble everthing is working fine the only question I have is is there a benefit to migrating the 2 together and what happens when I do Thanks.  Ricco

    I recently downloaded Parallels 9 to my imack so I could install Windows 7 Home Premiumwith no problem and everthing is working fine, and I was thinking of Migrating the 2 2 and was wondering what benefits there would be and what happens when I do.

    Windows 7 will peer down through the VM and remember what hardware the VM is installed on. Migrate the VM to different Mac hardware, and on first boot, Windows 7 will advise you that you are not using genuine Microsoft Windows. It will then treat you as though it believes you misappropriated it.

  • Time Machine backup created on Mac with a large hard disk. What happens when restore to MacBook Air with small SSD drive?

    What if a Time Machine backup was created on a Mac with a large hard disk, e.g. 500GB iMac - and I buy a new MacBook Air with a small SSD hard disk e.g 128GB. What happens when I need to use the larger Time Machine file to set up the new MacBook Air? What happens to all those files that can't fit on the smaller SSD drive?

    It is not the HD size, but rather the size of the data it contains. If you right-click your 500GB drive and select "Get Info" you can see how much is actually being used.
    Naturally if you are using more space than the new drive has, then you have to make some choices about what you want to keep and what you want to keep archived.
    I don't know what options are available but you may simply have to do a manual restore of files you want, in groups.

  • What happens when I restore data to a non-factory set iPhone?

    Okay, another iCloud question. What I did was basically delete a game, start a new one, and now I want my old game back (saved to ICloud). What happens when I restore full data to a non-factory set iPhone? Will it overwrite current data? Will it delete everything? I just want to know, I'm such an iOS noob. :-/

    A restore is all or nothing.
    If a backup is restored to the device, ALL data currently on the device is wiped and replaced with the data from the backup.
    Restoring a backup to get one saved game back seems rather extreme and silly.

  • What happens when HTTPS communication fails during certificate check?

    Hello Experts,
    I have a scenario where a Bapi functionality(server proxy) is exposed as a webservice .
    So scenario will be SOAP -> XI -> Proxy (calls a BAPI)
    Here we are going to use HTTPS (SSL).
    I would like to know :
    What happens when a check for certificate validation fails in XI? It may be due to invalid certificate, expired certificate or a request from unauthorised user-
    - Will it be raised as a exception and we need to do some  configuration to inform it back to Sender?
    - Will the message fail in Moni with red flag ?
    - Alerts will be created ?
    Please share your experiences and expert sugestions.
    Thanks in Advance!!
    Regards,
    XI Queries.

    Hi Abhishek,
      Thanks for the reply. I will keep this in mind and design the scenario & error handling accordingly.
    Appropriate points awarded
    Kind regards,
    Xi Queries.

  • What happens when max job limit of few RAS server is reached?

    Hi, I would like to know what happens when max job limit of server is reached. I know that we need to increase the job limit but my question is a bit different.
    We have 7 RAS per servers. I got this message "The maximum report processing jobs limit configured by your system administrator has been reached" on 4 RAS servers but not all 7. I am tracking servers using PIDs on WIndows server 2003.
    Does this means this is a warning that Job limit of 75 (in our case) has reached for 4 servers and for remaining 3 servers its still not reached. This means 3 servers are still able to handle more report request as they have not reached their max limit.
    OR
    This message means all of the servers have reached to their max limit and there is no more request which can be taken.
    We are doing 3000 users performance testing on 21 RAS servers.
    We are on BOXI R2 SP3 on IIS and opening crystal reports using .NET SDK.
    Thanks,

    This is same as my other question so I am closing this too. We have set limit as unlimited and during peak load we had almost balanced reports on all RAS.

  • What happens when Time Machine starts to fill up a drive?

    Using Time Machine on a partitioned External HD has been an absolute snap! I love the app. My main disappointment with it is that it has no literature on HOW it works, and no real ways for me to set different controls for it other than on and off.
    My question is that what happens when a drive starts to get full? I have about 30 gigs left on the partition, and I am wondering what Time Machine is going to do. Does it just delete the oldest material, or does it simply fill up and tell me to look at everything on there and decide to clear it all off. I hate that I don't know what will happen.
    -Jon

    From what I've read (I've not gotten a drive full so I can't speak from experience), when the TM drive gets full, it will notify you that it's going to start deleting the oldest backups to make space for the new ones. This general behavior is mentioned in the Mac Help for Time Machine, though it makes no mention about notifying you before it deletes the old backups, so I'm not sure about that part.

  • What happen when Database in Backup Mode?

    Hi,
    What happen when we kept database in backup mode, Means using command 'Alter database Begin Backup';
    Thanks...
    Asit

    jgarry wrote:
    EdStevens wrote:
    jgarry wrote:
    What do you think of the snapshot backup on page 22 of [url http://en.community.dell.com/techcenter/storage/w/wiki/2638.oracle-11g-backup-and-recovery-using-rman-and-equallogic-snapshots-by-sis.aspx]this paper? (No sarcasm, I'm curious about these snap solutions in general. Though I am really down on Dell for what turned out to be a brain-damaged laptop I got for my wife.)
    Well, you can't really make a judgement about a company's enterprise products based on an experience with their consumer products.What if it came from what they call a business products catalog? They intermingle laptops with servers.
    Don't know, in general. I do know that for Dell there is a distinct difference between their decidedly consumer laptops (Inspiron) and their "business" Lattitude series. I know that at my last job we had a lot of rock solid HP equipment (servers and SAN) - vs. an HP laptop I had that was trouble from Day One. I'm sure there is a point in desktops and laptops the line can get blurred, but in the case of the OP, he was no where near that fuzzy line.
    >
    >>
    Perhaps I can find time to read the white paper over the weekend ....

  • What happened when multiple audio players start at the same time?

    Hi,everyone!
    I am developing a game, using JMF to play sound.
    These sound are stored in mp3 files.
    In order to decode mp3 files, I installed JMF and mp3-plugin( jmf-2_1_1e-windows-i586.exe , javamp3-1_0.exe).
    In the Game, a background music play back repeatly.When EndOfMediaEvent happened, I setMediaTime(new Time(0)) and then start().It works well.
    There are several sound-effects,may start at any time,
    so 2 or more sounds may play back at the same time,
    and then Strange things happened.
    Those sound-effects, usually short, can not play back inextenso.
    They lose some beginning part, the length of the part is not constant.
    i.e. Audio should start at MediaTime 0, but now they start at MediaTime x, x >= 0,
    not only that, sometimes, Audio process bar runs, but no sound heared.
    I do not know what is happening.
    So please help me, thanks a lot.
    The way that I use Players:
    initialize:
    create realized players from mp3 files
    prefetch them
    finalize:
    deallocate not null players
    then close them
    using:
    player.setMediaTime(new Time(0))
    then player.start()
    My Environment:
    Windows XP, java 1.4.10, JMF2.1.1, MP3-plugin1.0

    This is very strange, difficult to guess the cause... never had such an issue. Normally when the object to which the audio is attached disappears the audio stops. So in your case going to a next slide should stop the audio of the previous slide. Same with object audio.
    Do you have the different audio clips (one per slide) in the Library? Could you try to delete the audio on the slide and drag it again from the Library to see if you have the same result? And what happens when you attach the audio clip to an object on the slide (you can create a totally transparent rectangle with no stroke that will not be visible to attach the audio).
    Lilybiri

Maybe you are looking for

  • Additional field in report layout

    Dear Experts, In t code me2j (ALV format) there comes option change layout. when we click on this, we found displayed column and hidden column. if i want add one  extra column in hidden column. how can I Add this. this extra column is related to repo

  • Raw XML from Oracle once BI Publisher report is mapped and grouping in Word

    Hello, Once you have uploaded your BI Publisher report, mapped it out, etc. Does anyone know how you can still view the raw XML data, similar to what you loaded into word BI Publisher originally? And separately does anyone know the best way to group

  • Pls_integer vs. number

    PLS_INTEGER values require less storage than NUMBER values. Also, PLS_INTEGER operations use machine arithmetic, so they are faster than NUMBER and BINARY_INTEGER operations, which use library arithmetic.Having this, if i add two numbers, one of NUMB

  • Using Iterator

    My intention here is to implement a function that do something to a Collection. The function recusively "knock off" one element from the Collection and call recursively until it hits certain base case. Also, I would like my Collection argument untouc

  • TL11g & EJB3: One-to-Many problems with removing entity from list

    Hi, I posted this problem on JDev11g forum, but I hope I will get some information here as well. I have two entities based on tables in HR schema (Departments and Employees). Department has a list of employees. These are the annotations: @Entity publ