What happend to past delta data if we delete Delta INIT from Cube? safe ?
Hi Friends,
we have a cube where delta data is loaded daily from ODS.
So, cube have many delta requests and data is compressed.
Now have some problem and need to delete Delta INIT from this Cube and run fresh delta INIT again into Cube from ODS. Is that safe ?
If we do this...is there is any problem with past delta data availble in the Cube?
Please confirm..
Thanks
Tony
Hi,
I told you to check this before deleting the init as it very tough to manage it after that.
Now those delta request are missed and I dont think can be retrieved without doing a full repair with proper selection.
If you do a new init then there should be no request without a check for data mart status??
So you found it before deleting the init??Then you should not have deleted the init as I told earlier.
The only option is too reload the whole histroy again if you are not able to load it through selections in infopackage.
First do a selective deletion from the cube for the same selections and then schedule the full load for those selections from DSO.make sure these selections cover the whole scenario.
You cannot do anything else now to correct it.
If you data is not huge in cube then delete the whole data and reload it.
Schedule multiple loads from the DSO at the same time through different infopackages.
this will save time as weill will do the loads in quick time.
Thanks
Ajeet
Similar Messages
-
What will happen to the data if we delete a disk in ASM
Friends -
Question : Under RAC Environment we are using ASM for Storage. I want to know what will happen to the data if we delete a disk?
Please advise on this.
Regards
VSHIt depends on level of redundancy and disk space left. As long as there's enough space on remaining disks, data would be rebalanced between the disks.
You can check the ASM operations if you query v$asm_operation:
select * from v$asm_operation; -
In the past it was possible to delete songs/tones from iTunes but this no longer seems to be the case. Is it possible to delete songs or tones if they are not duplicated - I just no longer want them in my library?
Howdy SJHocking,
It sounds like you want to know how to dele songs and ringtones from iTunes. Take a look at the article linked below, it’ll walk you through the process of deleting content from iTunes.
Delete songs, playlists, or other items - iTunes Help
If you have iTunes Match enabled, take a look at this article which will walk you through the process of deleting songs from iCloud.
iTunes Store: How to delete songs from iCloud - Apple Support
Cheers,
-Jason -
How to know the date of the deleted delta
Hi,
Deltas run every 30 min daily.
One of the delta is deleted .
How can I know on what date & which delta is deleted.
Points will be assigned.
Message was edited by:
vijay ajarlaHi Vijay,
Are you loading a CUBE or ODS? How did you come to know that a DELTA has been deleted? Is there any message saying that a DELTA or a REQUXXX is missing? any other info?
All the above information would help us in identifying your issue quickly.
But try this anyway .......
Goto Manage of the ODS or CUBE...goto the Contents Tab...Here you will find a Button "Selective Deletion"...click on this button.
This will popup another window....in this window you will find a Button "LOG", click on it, this will again display a list of LOGs, if you know the date on which the DELTA might have deleted...then double click on that LOG and you will find the request id that was deleted(if a request was deleted as a whole) or you will find hte selection used to delete data from the target (if selective deletion was used)
Hope this helps.
Cheers,
Praveen. -
Customized delta data source for deleting data record in the source system.
Hello Gurus,
there is a customized delta data source, how to implement delta function for deleting data record in the source system?
I mean if there is record deleted in the source sytem, how to notify SAP BW system for this deleting change by this customized delta
data source?
Many thanks.Hi,
when ever record deleted we need to write the code to insert the record in Z table load this records into BW in a cube with similar structure.while loading into this cube multiply the Keyfigure by -1.
add this cube in the Multi Provider.The union of the records in the orginal cube and the cube having deleted records will result in zero vale and will not be displayed in report .
Regards, -
I downloaded the entire Beatles collection from iTunes in 2011. Some songs skip and won't play. Some albums won't sync to the phone but they sync to my iPad. I've deleted the entire music library from my iPhone, shut the phone down, turned the phone on and synced again to add the music but now 2 albums won't even sync (Rubber Soul and Revolver). I've tried dragging the songs to the iPhone, no luck. Any thoughts?
Sounds like you may need to re-download the entire albums from iTunes. See this KB article for how to download past purchases: http://support.apple.com/kb/HT2519.
I'd suggest doing it one album at a time. Delete one, download it from your purchase histor, then the next, etc. -
CO delta extractors: How to delete single init uploads?
Hi Gurus,
i'm uploading COPA data with parallel initializations. I'm initializing data with different selections criteria, for example:
init for SOCIETY X - EXERCIZE 2008
init for SOCIETY Y - EXERCIZE 2008
init for SOCIETY Z - EXERCIZE 2008
init for SOCIETY X - EXERCIZE 2007
This works, but i'm not able to delete a single initialization: when i try to delete one in IP "Scheduler -> Initialization for this source" the system deletes all initializations.
Is somene able to help me?
Thanks
PieroThanks for the answer,
but so i don't understand which is the utility of the parallel initializations.
How can i reinitialize only a selected period instead of all COPA DATA ( millions or records to initialize) when in COPA runs transaction KEND???
Now R/3 is 4.6C version but we are migrating to ECC 6.0.
Thanks
Piero -
Will erasing all data on my I phone permanently deleted previously deleted SMS and MMS messages on my I phone 5s?
Nope.
As long as you erase all content and settings/restore your phone to factory, anything on it will not be
retrievable
-Regards -
Hi,
I am facing problem delta data uploading. Following steps as follows which I have done :
1. First I have upload the data with Initialize delta process ( Initialization with Data transfer )
It was working fine and uploaded data to ODS.
2. Send I have upload the data with delta update option.
It is working but no data is being uploaded.
In customize data source I have selected delta specific field CPU_DT( Date field ).
Can any one help me what I have done mistake.
Thanks in advance,
Regards,
GoutamHI,
Possibly you must have done the Init with Data transfer.....so all the records available has come to BI system.....now again you are running the delta.....but there is no changed or new records available in source system.....that why it must be coming with 0 records........
You can manually change the records in base table or add some new records....then execute the delta.... you will get some records in BI.....................
The other option to check your delta functionality is to delate all the data and also delete the Init.....................
Now you again run the IP with Init and without data transfer...............in this case it will enable the next load for delta .....now you run the delta IP........it should get the records in BI.....
Thanks
Mayank -
How to upload past results data in SAP
Hello All SAP GURUS......
Actually earlier there was using a separate system for result recording of inspection lot. Now as upgraded to SAP Client want all old result entries should enter in SAP.
The hierarchy of result recording is:-
Ist Level:- There are too many operation in an inspection lot.
IInd Level:- There are too many sampling point in an operation.
IIIrd Level:- There are too many MIC in a sampling point.
IVth Level:- There are too many dates in a MIC.
Vth Level:- There are too many times in a date.
Now we have all these things as past data e.g. Inspection lot, Operation no, Sampling point, Date, Time, MIC and result.
Actually we are also using a program but is is taking huge time for uploading the entries as 10000 entries in 20 hrs
Please guide how can we make it fast.Dear Fire Fighter,
Please find the coding which I using and program logic:-
REPORT ZBAPI_QE51N_DATA_INSERT NO STANDARD PAGE HEADING.
INITIALIZATION.
TYPE-POOLS SLIS.
DATA: BEGIN OF ichar_results OCCURS 0.
INCLUDE STRUCTURE BAPI2045D2.
DATA: END OF ichar_results.
DATA: BEGIN OF isingle_results OCCURS 0.
INCLUDE STRUCTURE BAPI2045D4.
DATA: END OF isingle_results.
DATA: BEGIN OF bapireturn2 OCCURS 0.
INCLUDE STRUCTURE bapiret2.
DATA: END OF bapireturn2.
DATA: BEGIN OF RET OCCURS 0.
INCLUDE STRUCTURE bapiret2.
DATA: END OF RET.
DATA: BEGIN OF INSPPOINTDATA OCCURS 0.
INCLUDE STRUCTURE BAPI2045L4.
DATA: END OF INSPPOINTDATA.
DATA: BEGIN OF ireturntable OCCURS 0.
INCLUDE STRUCTURE bapiret2.
DATA: END OF ireturntable.
DATA : IT_EXCEL TYPE STANDARD TABLE OF ALSMEX_TABLINE,
WA_EXCEL TYPE ALSMEX_TABLINE.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK2 WITH FRAME.
PARAMETERS : P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK BLOCK2.
SELECTION-SCREEN END OF BLOCK BLOCK1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(83) text-002 MODIF ID COM.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(80) text-005 MODIF ID COM.
SELECTION-SCREEN END OF LINE.
TYPES :
begin of it_type,
p_oprnum type BAPI2045D2-inspoper,
lot_num type BAPI2045L2-INSPLOT,
samp type BAPI2045D4-EXT_NO,
date type char10,
time type char10,
c_code1 type QIBPMERKNR,
char1 type BAPI2045D4-RES_VALUE,
end of it_type.
DATA : IT_ITAB TYPE STANDARD TABLE OF IT_TYPE,
WA_ITAB TYPE IT_TYPE,
IT_ITABM TYPE STANDARD TABLE OF IT_TYPE,
WA_ITABM TYPE IT_TYPE,
charv like WA_ITAB-char1,
sign.
DATA : IT_ITABv TYPE STANDARD TABLE OF IT_TYPE,
WA_ITABv TYPE IT_TYPE.
TYPES : BEGIN OF FTYPE.
INCLUDE TYPE IT_TYPE.
TYPES : MES_TYPE(1),
MESSAGE TYPE STRING.
TYPES: END OF FTYPE.
DATA : IT_FTAB TYPE STANDARD TABLE OF FTYPE,
WA_FTAB TYPE FTYPE,
STR TYPE STRING,
rc type sy-tabix..
data : p_oprnum type BAPI2045D2-inspoper,
lot_num type BAPI2045L2-INSPLOT,
c_code type QIBPMERKNR,
char type BAPI2045D4-RES_VALUE,
samp type BAPI2045D4-EXT_NO.
DATA ITCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA FCAT_WA TYPE SLIS_FIELDCAT_ALV.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF SCREEN-group1 = 'COM'.
SCREEN-INTENSIFIED = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE .
PERFORM VALUE_HELP .
start-of-selection.
PERFORM GET_DATA1.
perform update_records_in_qe01.
PERFORM ERROR_LIST_ALV.
FORM UPDATE_RECORDS_IN_QE01 .
SORT IT_ITAB BY LOT_NUM P_OPRNUM SAMP date time c_code1.
DELETE ADJACENT DUPLICATES FROM IT_ITAB
COMPARING LOT_NUM P_OPRNUM SAMP date time c_code1.
IT_ITABM[] = IT_ITAB[].
SORT IT_ITABM BY LOT_NUM P_OPRNUM date time.
DELETE ADJACENT DUPLICATES FROM IT_ITABM
COMPARING LOT_NUM P_OPRNUM .
DATA : NUM(2) TYPE C.
FIELD-SYMBOLS : <FS1> TYPE ANY,
<FS2> TYPE ANY.
LOOP AT IT_ITAB INTO WA_ITAB.
refresh: isingle_results,
INSPPOINTDATA.
isingle_results-insplot = WA_ITAB-lot_num.
isingle_results-inspoper = WA_ITAB-p_oprnum.
isingle_results-inspchar = WA_ITAB-C_CODE1.
isingle_results-res_no = '0001'.
isingle_results-RES_VALUAT = 'A'.
clear :sign, charv.
charv = WA_ITAB-CHAR1 .
CONDENSE charv NO-GAPS.
IF CHARV(1) = '<' OR
CHARV(1) = '>'.
SIGN = CHARV(1).
CLEAR CHARV(1).
CONDENSE charv NO-GAPS.
ENDIF.
isingle_results-RES_ATTR = sign.
isingle_results-res_value = charv.
APPEND isingle_results.
INSPPOINTDATA-INSPLOT = WA_ITAB-lot_num.
INSPPOINTDATA-INSPOPER = WA_ITAB-p_oprnum.
INSPPOINTDATA-USERC1 = WA_ITAB-samp.
CONCATENATE WA_ITAB-date6(4) WA_ITAB-date3(2)
WA_ITAB-date(2) INto INSPPOINTDATA-USERD1 .
CONCATENATE WA_ITAB-time(2) WA_ITAB-time3(2) WA_ITAB-time6(2) INTO
INSPPOINTDATA-USERT1 .
append INSPPOINTDATA.
MOVE-CORRESPONDING WA_ITAB TO WA_FTAB.
lot_num = WA_ITAB-lot_num.
p_oprnum = WA_ITAB-p_oprnum.
CALL FUNCTION 'BAPI_INSPOPER_RECORDRESULTS' "DESTINATION DEST
EXPORTING
INSPLOT = lot_num
INSPOPER = p_oprnum
INSPPOINTDATA = INSPPOINTDATA
IMPORTING
RETURN = bapireturn2
TABLES
SINGLE_RESULTS = isingle_results
returntable = ireturntable.
LOOP AT bapireturn2.
WRITE :/ bapireturn2-TYPE,
bapireturn2-MESSAGE.
ENDLOOP.
READ TABLE ireturntable WITH KEY
TYPE = 'E'.
IF SY-SUBRC = 0.
WA_FTAB-MES_TYPE = ireturntable-TYPE.
WA_FTAB-MESSAGE = ireturntable-MESSAGE.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK' "DESTINATION DEST
IMPORTING
RETURN = RET.
ELSE.
rc = rc + 1.
str = rc.
CONCATENATE '::' str '=>' 'Records updated' into str.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' "DESTINATION DEST
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = bapireturn2.
WA_FTAB-MES_TYPE = 'S'.
WA_FTAB-MESSAGE = 'Record successfully created'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = rc
TEXT = str.
ENDIF.
append wa_ftab to it_ftab.
ENDLOOP.
ENDFORM. " UPDATE_RECORDS_IN_QE01
FORM VALUE_HELP .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE.
ENDFORM. " VALUE_HELP
" GET_DATA
FORM ERROR_LIST_ALV .
DATA : TITLE TYPE LVC_TITLE .
CLEAR : STR.
STR = RC.
CONCATENATE 'Total : ' STR ' records updated' into str.
TITLE = STR.
PERFORM FCAT_FILL.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\lims_error_log.xls'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = IT_FTAB
IF SY-SUBRC <> 0.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-CPROG
I_GRID_TITLE = TITLE
IT_FIELDCAT = ITCAT
TABLES
T_OUTTAB = IT_FTAB
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " ERROR_LIST_ALV
FORM FCAT_FILL .
perform append_fcat using 'P_OPRNUM' 'Operation Number'.
perform append_fcat using 'LOT_NUM' 'Lot Number'.
perform append_fcat using 'SAMP' 'Sampling point'.
perform append_fcat using 'DATE' 'Sampling Date'.
perform append_fcat using 'TIME' 'Sampling Time'.
perform append_fcat using 'C_CODE1' 'CODE 1'.
perform append_fcat using 'CHAR1' 'Value 1'.
perform append_fcat using 'MES_TYPE' 'Message Type'.
perform append_fcat using 'MESSAGE' 'Messages'.
ENDFORM. " FCAT_FILL
FORM GET_DATA1 .
data file type string.
file = p_file.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-111.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = file
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it_itab
IF SY-SUBRC <> 0.
ENDIF.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT-112.
ENDFORM. " GET_DATA1
FORM APPEND_FCAT USING P_VAL1
P_VAL2.
FCAT_WA-FIELDNAME = P_VAL1.
FCAT_WA-SELTEXT_M = P_VAL2.
APPEND FCAT_WA TO ITCAT.
CLEAR FCAT_WA.
ENDFORM. " APPEND_FCAT
Please suggest.
Edited by: vivekrastogi on Mar 16, 2011 5:30 AM -
XEM - Unable to load the initial data or the variances(delta) data into sys
I am installing xEM 2.0 SP 10 (SAP xApp Emissions Management) in a windows environment with SQL 5000. I installed xEM on NW 2004, usage types AS Java and EP 6.
I am attempting to load the initial data or the variances (delta) data into the system. Instruction is on page 15 in the install guide.
I am supposed to enter the following in the command line:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=[JDBC Driver];[JDBCUrl];[User];[Password]
Example command for import into SQL Server:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password
The customer I am with is running the xEM database on a different instance. This is where I run into a problem. I am not sure how to specify the instance in the script. This is what I have attempted so far:
C:\>cd temp\load
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43;SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establishing socket. Connec
tion refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect
at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establi
shing socket. Connection refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection ref
used: connect
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534;SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user
'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Lo
gin failed for user 'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534:SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>
My last attempt was a command using colons and semicolons with the following results. The closest (there was a significant delay before the error or failure) appears to have been //PRODSQL43;SQL3:1534; (second attempt). The error listed from this attempt is "Error establishing socket. Connection refused: connect".
I also checked the default database that user SAPPEMDB has in place and it is assign the correct database.
Please help.
Message was edited by: Owner
Mike SmayrabunyaHey,
It looks like one of the following:
1. The DB is down,
2. The user SAPPEMDB does not have the right authorization.
3. The password of the user SAPPEMDB is not password
4. The syntax is incorrect
in order to find what is the problem,
please:
1. Login in the the DB PRODSQL43:1534 with the user "SAPPEMDB" and the password "password",
this will eliminate the options 1 - DB down, 2 -SAPPEMDB does not have authorization and 3 - password of the user SAPPEMDB is not password.
2. If the login failed, than please run sql trace with security elements (in the client there is a tool called "SQL Profiler"
3. If the login is correct, than you check the syntax of the command:
"java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password"
According to the error message "Error establishing socket. Connection refused"
it looks like The DB is down or syntax is incorrect. -
A few days ago, I plugged my ipod touch into my computer to charge it, and also add new music I purchased. When I unplugged the USB cable ( I disconnected it from the ipod first, as I was told to do) I went to look through my music. There was a notification, I don't remember what it said verbatum, but the gist was "177 songs could not be properly synced onto your device". Now, I'm missing music from my itunes library. For example, I purchased two full albums from the same band, now over half the songs from the albums are just gone, they are no longer on my ipod or itunes. Does anyone know what happend, and/or how I can fix this? Please and thank you
P.S. This happend after installing itunes 6, I've noticed many other people are also having problems with it as wellCould be several things. Without more information like what was the wording of the error message I will not even guess.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Terms of payment in past due date ???
hi ...
Is it possible to maintain due date in past in terms of payment ?
In bizz scenario , if i maintain terms of payment in past due date in stead of future so that automatic posting can happen ....
Regards
mkcHi MKC
Your question is unclear - What should post automatically?
James -
OSA: Copying Past Appraisals data to New
Hi,
I Hav already a link called "Last Document" which opens the Last Appraisal document in a new window.In addtion to that i want a button called <b>Copy Last document </b>. On clicking the button the past appraisals data should be copied to new form.
Is this possible? Im using SAP4.7 and HR Extension 2.0.
Rgds,
Jothi.PHi,
Say old document has 3 added qualifications (via the free enhancement):
So the structure looks like
element Q group (coming from template)
Q1
Q2
Q3
Now the new document looks initially like this
Element Q group
Via the fix enhancement you can read the elements added in the previous document and add these Q's in the new documents. Now you have the same structure in your new appraisal. Now you will need to get the values, which then is done via a value determination.
So, fix enhancement to copy the elements, value determination to copy the values.
However, what would you do with free objectives (same element technically with each time another text)? You cant uniqly indentify them, as such your val.det would go wrong.
What about deleted elements? Elements that are not available anymore?
All these things you will need to take into consideration.
Regards and Groetjes,
Maurice -
Hello guys,
I have a strange issue here. I load say ODS2 from ODS1. When trying to load ODS2 one day, i find and issue and the load is turned red. When i executed the delta IP again, it asked for the repeat of the delta, for which i said yes. I did not delete any datamart status from ODS1. This repeat got me double records than the original request, and now i have doubled records in ODS2. Since ODS2 is on addition, the doubling data issue. Does anyone had this problem? Why the repeat of delta updated double the number of records than what it shud be? will be great if anyone can come up with a clarification.
Regards
SriramHi Sriram,
At First you need to Delete the Request from ODS2,
Question is which request should be deleted. answered below.
In ODS1 --> Note the Request where Repeat of delta has occured. Check the datamart Request of that Repeat Request. This datamark request clearly shows that At what request in ODS2 its updated.
Now your job step by step as below:-
1. Delete request in ODS2 (Please note :request which you had taken in the datamart of ODS1).
2. Delete the Datamart of the ODS1 at the Repeat delta request.
3. Delete Request of ODS1(till where you had removed the datamart for this ODS)
4. Go to reconstruction tab and reconstruct the request which are correct (eliminate failed request)
Please note:- please reconstruct one(1) request and then datamart. Once you do this you will come to know the logic behind.
5. Then Datamart to ODS2.
If its complicated to understand, please call call me
Thanks
Regards
Hari
Maybe you are looking for
-
Delete music from the cloud with ipod touch
how do I delete songs from the cloud with ipod touch
-
Errors x86 and x64 reinstalling MS Office 2010. Same problem with Trial MS Office 2013
Hi. I lost MS Office 2010 3 weeks ago, after I tried to rename my Owner username in the registry, following steps I found online. I have not been able to restore MS Office at all. I received Office I have attempted to uninstall and reinstall severa
-
What add on do i need to remove to stop the following error
keyword Add-on![Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: chrome://keywords/content/overlay.xul :: <TOP_LEVEL> :: l
-
I cannot use Quicken on my new MacBook Air (Mac OS X Lion 10.7.2) Any suggestions? I love Quicken and it takes care of all my financial needs.
-
Hi Team, I am doing export of particular tables. Now client requested me "Roll Back From export". How to do this. please suggest any one. Regards,