What happened to Cisco Network Magic?

I'm connected to Internet but it says there no internet in the software i tired everything i remember last 1 year i reinstalled it didn't work yesterday i tired to connect to purenetworks.com it didn't open but when i open a vpn software it connects to the internet and it gives DNS but without it it doesn't purenetworks.com didn't open even while vpn software was activated it says in IVP4 connected in the router page settings connected but in IVP6 and Netwrok Magic its not connected i even tired to untick IVP6 and tick it didn't work last year could you Cisco had discontinued this software or you are working on it thank u for ur answer :)

Mike,
Does any of these help?
http://www.cisco.com/web/partners/index.html
http://www.cisco.com/web/partners/support/index.html
http://www.cisco.com/web/partners/tools/helponline/index.html
Pls let us know -
Tom Yoritaka, Director, Cisco Support Community

Similar Messages

Networking Printer on MBA with Cisco Network Magic

I have Kodak ESP-3 printer attached to Windows Vista PC and networked with Cisco Network Magic to Windows Laptop. I have installed Cisco Network Magic for MAC on MBA. There seems to be a problem in that the MBA doesn't pick up the printer,links with pc & laptop fine for all file sharing etc.
Am new convert to Mac so any help would be good from one of you experts PLEASE

What model number is it?
Printers Supported
Network Printer Troubleshooting

What happened to Cisco Presales Support

What happened to Cisco Presales Support? Did they get cut? I used to get outstanding service when I opened cases with them online. I had nothing but praise..
Their web link is gone now, only a phone number. I just called them and they pretty much told me to talk to my vendor.
That was a wasted of 15 minutes of my life that I will never get back..

Mike,
Does any of these help?
http://www.cisco.com/web/partners/index.html
http://www.cisco.com/web/partners/support/index.html
http://www.cisco.com/web/partners/tools/helponline/index.html
Pls let us know -
Tom Yoritaka, Director, Cisco Support Community

What Happen to my Network

HI All!
10xs for ur time to help me.but no body tell me why this problem occured{server no pingable;loop;duplicate ip address,this ipsubnet that appeared not exist IN MY Network;all access Switchs in the Enterprise down}its possible if the mode is desirable on the access switch;and mode is on on the core side;did all these problem.
PS,PS I NEED EXPLANATION WHAT HAPPEN.from the Cisco Expert.
10XS FOR UR HELP!
ALI

You can use syslog to send all the connection-logs to an internal server (I would use a linux-box with syslog-ng). There you have all sessions that were used through the ASA. On the server you can search or filter these logs with your native tools (grep, tail, etc.). If you need more comfort there are several commercial solutions available.
logging enable
logging timestamp
logging trap informational
logging device-id hostname
logging host inside YOUR-LOG-HOST-IP
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

What happened to iPhoto network sharing?

Since upgrade to Mavericks, I cannot see how I share photos across my home network. I do not want to have to upload to icloud as this will take much longer. What happened to the home network sharing option?

Two things:
1. Great Find:
Apparently everyone ignores the option of home sharing the iPhoto library using iTunes
2. On the other hand:
I simply put it on my Qnap NAS
you might want to read this and reconsider:
iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
See this article
http://support.apple.com/kb/TS5168
for more. Note also the comment:
“Additionally, storing the iPhoto library on a network rather than locally on your computer can also lead to poor performance or data loss.”

View what happen to my network?

I have asa as a gateway to internet, can i have a complete view or log traffic flow through my asa, i already try netflow but what i see is top-n traffic not all traffic.
Thx

You can use syslog to send all the connection-logs to an internal server (I would use a linux-box with syslog-ng). There you have all sessions that were used through the ASA. On the server you can search or filter these logs with your native tools (grep, tail, etc.). If you need more comfort there are several commercial solutions available.
logging enable
logging timestamp
logging trap informational
logging device-id hostname
logging host inside YOUR-LOG-HOST-IP
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

What happened to Cisco Mobile Supervisor? No longer in app store.

Cisco Mobile Supervisor is no longer in the app store. Is there a reason?

Hi,
no reason. It was killed silently.
If you take a look at the UCCX comp matrix, for instance, for UCCX 9.0(1), there's the following note:
Note: The Cisco Mobile Supervisor application is withdrawn from the Cisco App Store. Cisco does not provide support for Cisco Mobile Supervisor deployments.
A wild theory of mine follows: that application was actually a one-man-show. A toy to be shown on product demos, a piece of art, never understood. I actually liked it, although it was somewhat limited as Aaron has pointed out bellow. I guess the original creator of the application waved goodbye to Cisco plus now that "everything is on the web" (ie. it's easier to create a web application than to maintain a "fat" client) Cisco did not have the reason why they should keep it any longer.
If there's a CCBU person lurking around here, could you please comment on this.
G.

What happened to my network connection?

As of today, I cannot make or receive calls. I cannot check my email or browse in safari. When I attempted to call *611 from my phone for service, I got a recorded message that they could not complete my call, and that I should hang up and call customer "service" at *611. for what am I paying too much every month???
I attempted to try the online chat, but all the support staff was busy with other customers (too many other customer complaints???)
I was able to get a hold of my father (on the same acct) via my work phone. He is not having any problems.
I already paid my bill, and I refuse to pay for a day in which I have NO service. At least the timer and alarms still work, but I don't need an expen$ive phone bill with an ordinary timer or watch.
Fortunately, my contract is over soon, and I will be set free.
thanks in advance.

jprintz,
I am so sorry about the issues you are having with your service on your device. We definitely do not want to lose you and want to make sure we get this issue resolved. Are you still having issues with your device? What zipcode are you in?
LindseyT_VZW
Follow us on Twitter @VZWSupport

Connected to Internet, but Network Magic is Not

Hi, I recently got a linksys wireless G router WRT54GS2 and it came with Netmagic. The first time I used it everything was working fine, but now (about 2 hours later) NM cannot connect to the internet, and none of the repairs fix it. It's strange because I can connect to the internet and I'm writing this message using the router. The version of NetMagic I have is 5.1.9055.0

Axelgrind wrote:
I am running Windows Vista Basic
I have DSL
Using a wired connection through the router
Network Magic is not being blocked by a firewall
This is my router model
Help will be greatly appreciated.
PS. All my devices can connect to the internet including an Xbox 360 through a wired connection, an iPod touch through wireless, an Acer Aspire One netbook through wireless, and the desktop computer I am currently on with a wired connection to the router. The only problem I am having is that on this computer, Network Magic is saying I'm not connected to the internet, when obviously, I am.
Message Edited by Axelgrind on 07-23-2009 01:14 PM
Hi Axelgrind,
Reboot the computer and see what happens.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

What is the latest version of Network Magic Pro?

I've been all over this site and still can't get the simple answer. The updater in Magic can't be trusted. You would think the latest version number would be easy to find.

Current version of NM is 5.1, you can download it from www.purenetworks.com/download/
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Network Magic has difficulty identifying the Internet gateway

I am using a Netgear WNR854T router in a secondary position. The primary router is a Verizon (FIOS) Actiontec. I have given the Netgear router a static address of 192.168.1.55 and have set 192.168.1.1 (the Verizon router) as the primary gateway. Network magic incorrectly shows the Netgear as the Internet connection. Occasionally this will change and the Verizon router will be shown as the Internet gateway. When this happens all of my computers (wireless and wired) will show me connected to a new network. Is there some settings in either of these routers that I should check or change so that the Verizon router is consistently viewed as the gateway? Internet connectivity seems to be OK no matter which router Network Magic seems to think is the gateway. I can not address the Netgear router over the network for some reason (must physically attach it to a computer) Thanks for any help.

Hi, is DHCP disabled on your Netgear router?
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

"Network Magic Notification: NMApp.exe - No Disk" error message

Since downloading a trial of Network Magic I get an error message when linking to websites from email.
How do I fix this.

Hi there, can you please post some addtional info so that the Cisco Network Magic Support Community here on the Linksys Forums can assist you? The info that is needed is as follows:
1. Your Network Magic Version installed: example: 5.1.8345.0
2. The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.
3. The Brand of Modem and its Model Number the router is connected to.
4. The Brand, Model, Hardware Revision of your Router and include the Firmware Version: Linksys WRT54G v8.2 Firmware Version 8.2.05
5. The Method of connection your problem computer has to the Router: Wired or Wireless.
6. The Connection in use on the problem computer: Ethernet Port is a PCI Adapter Card, Linksys WMP54G v4.1
7. Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1
8. Software Firewall in use: McAfee Personal Firewall 9.0.136 Build
9. Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
10. Include your location in the post or fill out your Profile for this forum and include the location. (Reason: Not all Routers from a given manufacturer are available everywhere.)
11. Post the link to your Router Model, if an off-brand Router or not found in the USA on the Manufacturer's USA's Website. (Why? Posters helping each other, aren't working for Linksys or Cisco, so make it easier on the posters helping on.)
12. And any other information you think is important if answering your own post, and the nature of the problem, itself.
13. By posting all this information, you can hopefully get help from someone that has the same equipment that you have and theirs is working. Not everyone has the same equipment.
(Thanks to thecreator for providing me this list of info needed for NM support)
Please note that I am note that I'm not an employee of Cisco, and I am volunteering my time on here to assist other NM users, thanks!
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Hi, network magic problem.

This is my problem, my google nexus, is not connecting to my router. my dad said he kicked me, because he didnt know what it was on network magic aka track as intruder. im looking for the device on NM, cant find it. any solution? i heard you could uninstall NM and reinstall again, but im not sure if he remembers the admin/password to the linksys router info page and not sure if that will mess it up. thanks in advance.

You may try to do that as a workaround. Try enabling it, connect your Google nexus. then try disabling network lock again. It should let you connect then. You will only tracked as an intruder if you're going to manually set it as an intruder on the network magic software itself.

Disabling Right Click Menus for Network Magic's System Tray Icons for Standard and Guest Accounts

OK, so I want to know how to disable the right click menus for Network Magic's system tray icons only for Vista's standard and Guest accounts? I don't want other users signed in as a Standard account or guest account having the ability to disable the system tray icons for network magic.

Hi, currently it's not possible to disable NM from being accessed by a Limited user account, but that is a good idea.
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

RE: can not remove a device from Network Magic 4.9 Network map

My network map shows an old computer that has NOT been on the network for over 1 year....yet it still is shown as being "on" the network. That computer I listed as being an Intruder, and while it does show up in red on the map, I can NOT find out how to remove it. When I refresh the network map, it continues to show...yet I KNOW it is not there....
Can you tell me how to get rid of this non-existant computer please? When I right/click same I never get that "remove this device" option....
Jim

Hi, try doing a power cycle on your router and modem, and see if the computer disappears from the map.
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

What happened to Cisco Network Magic?

Similar Messages

Maybe you are looking for