What happened to Dayi Pro input?

I'm a Chinese speaker and need to use the Dayi Pro input method on both Mac's and PC's. Dayi Pro is extremely common in my home country of Taiwan where most people use this method (perhaps they don't on mainland Chinese, I don't know).
Anyway, after the Mac OS updated to 10.7 Dayi Pro has disappeared completely and I'm now unable to type Chinese at all. I still have a computer running 10.5 and can type on that but it's not my main computer and thus a real pain in the backside.
I've just literally updated my main computer to 10.8 in the hope that Dayi Pro would magically reappear but low and behold it hasn't.
Any suggestions on why this was removed or any alternatives? I really need the same input method otherwise it requires me to relearn how to type in Chinese.
Thanks
Liv

livwan wrote:
Any suggestions on why this was removed or any alternatives?
Nobody here can tell you anything about why Apple does things. For alternatives, look at the Chinese Mac site and ask in the forum attached to it.
http://www.yale.edu/chinesemac

Similar Messages

In Labview 8.5, what happens if the signal input exceeds the signal input range set by the DAQ Assistant?

Hello all,
This should be a pretty simple question, but I can't seem to find the answer on-line and don't currently have the capabilities to test this:
I'm using LabVIEW 8.5 and have a VI that imports sensor data through the DAQ Assistant. In the configuration tab there is a signal input range. What happens if my sensor exceeds this range? Will I get a warning? Will the value default to the maximum (or minimum)? I was interested in writing in some code to display an error as I approach the limits of this range, but was unsure if I also needed to include some code to display an error if the range is exceeded as well.
Thanks for the help,
Tristan
Solved!
Go to Solution.

Hello Tristan,
The behavior depends on the range you choose and the device you are using.
If you are using a device with only one valid input range, we will use this range even if you set a smaller minimum and maximum in the DAQ Assistant. Thus, if your device only supports ±10V and you set the range to ±8V, you will still continue to get valid data after your sensor exceeds 8V until you approach 10V. Once you reach the limit of the range of your device, the output will "rail" and just return the maximum value until the signal drops below the maximum again.
Note: A device that is nominally ±10V usually has some overshoot (like ±10.2V) that is typically specced in the manual.
However, if you are using a device with multiple input ranges then things get more complex.
The NI-DAQmx drive will pick the smallest range that fully encompasses the range you choose. So, suppose your device supports the following input ranges: ±0.2V, ±1, ±5V, and ±10V and you choose 0V - 3V as the range in the DAQ assistant. The NI-DAQmx driver is going to look at your input range and the list of input ranges that your hardware supports and choose the smallest that encompasses the full range you set. This would the ±5V, because that's the only range that contains up to 3V. As a result, any input signal between ±5V will be returned and any outside this range will "rail" to either the maximum or minimum value.
We do this because using smaller ranges make more effective use of the resolution of the ADC. Thus we try to use the most efficient range based on what you request without picking a range that will cause you to miss data.
Let me know if I can clarify this further.
Seth B.
Staff Test Engineer | National Instruments
Certified LabVIEW Developer
Certified TestStand Developer
“Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams

What happened to the Pro Tips page on the Apple site

There used to be a Pro Tips page on the Apple site with useful tips and shortcuts. I just noticed it in no longer accessible. Does any one know what happened to it? Does it have a new URL? The old URL is http://www.apple.com/pro/tips/

iToy users don't need tips. Just point and finger-wag. No thinking, just doing is the new paradigm.

What happened to quicktime Pro on my Macbook (ie. it is now useless)

Hi,
So upon completing a very simple imovie project (30s, 5 clips), I tried to 'share' it and save it as a decent sized quicktime file.
There are no video options avaliable under the expert settings....just audio setings! And, this happens no matter what resolution I choose to start my project (mp4-1080).
Can anyone explain this (apple?)
Is this due to me running imovie on my new Macbook?
further, even if I save the DV file, QUICKTIME PRO IS UNABLE TO EXPORT TO ANY SPECIFICATIONS OTHER THAN "email" and ".mac" (brutally small H264 andas the huge .DV file). As in Quicktime pro is useless.
What gives???
much thanks for all any help.
I'll be ahppy to provide any extra info as needed (screen captures if you don't believe me!)
Edit: I tried opening quictime under Rosetta -no dice..

resolved

What happens to Acrobat Pro that I already owned when I cancel my subscription?

I already owned Acrobat Pro X when I joined. My membership ends in three weeks and I have cancelled my subscription effective on that date. It appears that my Acrobat upgraded when I joined. What will happen to it once my subscription closes? Will I need to reinstall it?

Hi Cynthia,
If you already have the version of Acrobat Pro X installed in your machine, you can continue using it else you will need to install it and activate.
Regards,
Sheena

What happens to QT Pro 7.5.5 if I install QT 7.6.4?

Hello!
I have an iMac 3GHz with OS 10.5.5 running. (I cannot upgrade to Snow Leopard due to Pro Tools incompatibility, FYI.) I installed iTunes 9 b/c I wanted to download a movie and iTunes 8 wouldn't allow it. But I did not realize all the other installations that would be forced upon me!
So, I would like to install QT 7.6.4. I currently am using QT 7.5.5 PRO.
If I install 7.6.4 (downloaded from the Apple site for free), will I lose the PRO capabilities? I don't want to but PRO again, I just bought it recently!
Many apologies if this has already been addressed. (I tried to search for a discussion on this point on the Discussion boards but the necessary search terms are too general to be of use.)

If I install 7.6.4 (downloaded from the Apple site for free), will I lose the PRO capabilities?
No. The key you bought is valid in all versions of QuickTime 7.
(47830)

What happened to my Voice Input option button

My microphone was present on my keyboard and now it's not. I go to Settings/Language and Input/etc. etc. This is the message next to VOICE INPUT option that is grayed out "no voice input methods enabled. check Lang and input settings". I downloaded the Google keyboard and the same problem exists.
Why did the microphone key disappear? I can't put it back by the methods I have found using Google Search because I don't have the VOICE INPUT option. This is ridiculous. I loved using the TTS option. Now I can't. I've only had my phone a few months.
Galaxy Note 3.

Having the same problem on my 3Gs after upgrade.
The voice memos are NOT in iTunes but when the phone is connected to iTunes i can see and hear the voice memos on the iphone menu inside iTunes.
So it looks like the memos are still in the phone but somehow invisible... and now?

What happened to QT Pro??

Installed 10.6 and my QT Pro has been replaced by QT player?? I can't find my old QT Pro key because I have had it for so long... any ideas how to get it back?
Thanks for your time.

Check inside the Utilities folder.

What happens if i boot with windows an install a new version of windows on mac book pro ?

I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
the main questions are :
1. does it recognize any of my partition to select for windows installation ?
2. if no , can i format any partition for new partition during windows installation?
3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?

majid khalili wrote:
I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
Give your previous partition layout, you cannot install Windows via Bootcamp, unless you are willing to give up all your extra partitions and go back to EFI, OS X and RecoveryHD only configuration.
i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
the main questions are :
1. does it recognize any of my partition to select for windows installation ?
2. if no , can i format any partition for new partition during windows installation?
3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?
1. Windows installer will not work and you will end up with driver issues.
2. No.
3. You cannot, but if you could, the Apple Bootmanager would be your Boot Manager/Loader.

My old Intel-Based iMac is no longer recognizing USB wired input devices; it only recognizes Bluetooth. What happened?

My friend's old Intel-Based iMac is no longer recognizing USB-wired input devices (Kensington TrackBall, Logitech Mouse) plugged into any USB slot at the back of the computer.
They were working before and for many years.
All of a sudden, A pop up window came up. IT said no Bluetooth mice could be found. We don't know what set off that window to pop up and look for a WL mouse. It never has before in the 5 or more years my friend has been using this computer.
I supplied a wireless Apple mouse and his is back running again.
But want to know why his USB-input devices (Except his keyboard) are not being recognized. He would prefer to use his Trackpad (Wired), but can't find anything in SYstem PReferences to allow that. The computer only seems to want a Bluetooth input device.
Anyone have an idea what happened and if this can be reversed?
I think he is still running Mac OS X 10.5.8.

Hi Carol, lets try this...
reset FW bus, same goes for USB reset...
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive/devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

What happened to the Audigy 4 (non-pro) drivers on the websi

I swore a week or so there were seperate drivers for the new Audigy 4 (non-pro) on Creative's site. Now only the Audigy 4 Pro is shown under the download options. What happened? I was going to just use the online drivers with the audio console for an easy install and to ensure I have the lastest drivers.

Try download them MANUALLY. They're 5.2..6-2.08.00.000.
.jtpMessage Edited by jutapa on 09-3-2005 04:45 AM

After connecting my iPhone to my Macbook Pro to download photos to my phone, my pages application is now gone from my computer. The icon is still in the dock. What happened and how do I get it back?

After connecting my iphone to my Macbook Pro to download photos to my phone yesterday, my Pages application is gone from my computer. The icon is still in the dock. What happened and how do I get it back? Its not in my trash or anywhere else.

The other 2 applications open like normal. All three give me info.
Pages     ver.4.1          265.8MB
Numbers ver. 2.1          89.5MB
Keynote ver. 5.1.1        238.1MB
They all list Apr 3 as the last time opened. That was when I upgraded to Mavericks. I certainly used pages and numbers since then as I have alot of my work files on this computer?
Just very odd. I did find my original iWorks disc from when I bought the computer. I'm assuming i can reinstall it. Will try that. Thank you for all your help. Would still like to know what did happen?
Kat

Macbook Pro frozen with a strange sound every 5 seconds. What happened?

I was just surfing the net and suddenly my macbook pro 13 got frozen with a loud "beep" every few seconds (the same sound as that of upgrade booting). What happened? I've shut down and then it restarted as usual.
Sorry for my english.

Sounds like bad RAM. Run a hardware check and/or take the machine to the Apple Store or AASP.

Mac book pro will not start up. Charging light is on, but no response from computer. What happened?

The Mac Book Pro was fine, and then just stopped working. I connect the power source, and the light is on as if it is charging. However, when I try to turn the laptop on, nothing happens. There is no response whatsoever. Any ideas what happened and what I need to do?

Examine this support article for possible solutions:
http://support.apple.com/kb/TS1367?viewlocale=en_US
If no success, a trip to an Apple store genius bar is the best recourse.
Ciao.

Good Evening, I bought a Mac Book Pro in Miami and with Apple Care that was recorded in the Apple Store - Lincoln Road. Now I can not get access to Apple Care here in Brazil. Someone tell me what happens? Please help me solve this problem.

Good Evening, I bought a Mac Book Pro in Miami and = with Apple Care thatwas recorded in the Apple Store - Lincoln Road. Now I can not get access toApple Care here in Brazil. Someone tell me what happens? Please help mesolve this problem.

Call Apple Care

What happened to Dayi Pro input?

Similar Messages

Maybe you are looking for