What happened to dual sources for input and monitoring?
In LP7 you could set up for two different hardware sources for input and monitoring. That's Gone?
Gee's there is so much wrong with LP8 and all the constant crashes, makes it an unusable program. Apple really needs to get this fixed. They should already had a fixe. Lord knows they have seen enough disgust from users. To go this long without any updates is shameful! IMHO!
kevin4545 wrote:
And online software — this is no longer on the desktop? Wont that slow things down?
You download and install the software on your computer, same as you've always done. The software runs on your computer, same as it's always done.
kevin4545 wrote:
Do you have that upgrade link to CS6 j ust in case?
I already gave you three threads containing the link to the page where you buy an upgrade, but here it is:
https://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_cat alog_sl_software_sl_creativesuite6.html?start=10
Click on "Buy" then pick "Upgrade" and provide further details.
Similar Messages
-
What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss
What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelpHi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM -
What happen to my movie it disappear and what my song that partly down load . Is this all I can get for iTunes support!
No offence but how on earth is anyone meant to help with your problem when your post makes no sense and contains no information??
-
BHow do I set up the dual boot for Lion and snow leopard oon the same internal hard disK
What does Time machine do under the dual boot?I am also considering putting Lion and SL on separate hard drives.
Since this is an iMac forum, I assume you will use an external drive as the second drive. Use one that connects via firewire, not via USB.
Both on a single drive -
OK. Doing it on a single drive means you will need to partition the internal drive. Although this is straight forward, it is always best to back up the existing drive first, just in case. It's a good idea to have a backup on a different drive, anyway.
To do that, clone the entire internal drive to the external drive.
I would suggest, though, that you first partition the external drive. I would suggest four equal-size partitions, provided the drive is big enough - at least 1.0TB, though a 2.0TB drive might be better. You can use OS X's disk utility to do that. Go to the Partition page in Disk Utility, select your external driv in the list on the left, then use the Partition Layout menu to select the number of partitions. Set the format to Mac OS Extended (journaled) GUID for all partitions. Click the Apply button.
The easy way to do the cloning is to use a cloning utility such as Carbon Copy Cloner. Clone the entire internal drive to one of the partitions on the external drive. Then test boot to it (use Startup Disk in System Preferences to do that) to verify the integrity of the clone. At that time I would suggest you change the background design/picture for the desktop to aomething other than the one used on the original drive - this can be a handy visual reminder of which volume you are booted to.
Then add a partition to the internal drive. To do that, run Disk Utility. Go to the Partition page, select your internal drive in the list on the left, but do not use the Partition Layout menu this time. Instead, click the existing volume in the graphic display, then click the plus ("+") button underneath that display -
This will add a partition without erasing the existing information - i.e., the drive will end up with two partitions, one of which will contain your original boot volume.
Use Startup Disk to re-select your original boot violume, and restart back into it.
Now, clone the original drive again using CCC, but this time to the second partition of the internal drive, the one you just added.
Boot to that freshly cloned volume to verify it. Then, while still booted to it, install OS X 10.7 Lion onto it.
This will result in your original Snow Leopard on the first partition of the internal drive, and Lion on the second partition of the internal drive.
The external drive will have Snow Leopard on one partition, one partition will be empty (available for a clone of Lion if you wish, or use it for extra storage). The remaining two partitions can be used for Time Machine backups - one for Snow Leopard, one for Lion.
If you want to have each OS on its own hard drive, then you can use the first clone of Snow Leopard to the external to be upgraded to Lion, or upgrade the orignal on the internal drive to Lion. Be sure to boot to the volume to be used for Lion before installing it so that Lion is installed onto the correct boot volume.
You can then use the empty partition on the internal drive as the backup (or Time Machine) volume for the OS on the external drive, and vice versa. In this arrangement you may need only partition the external into two volumes.
If you have a different scheme in mind for partitioning, feel free to do that. I don't use Time Machine, so don't have the need to make space for it. Carbon Copy Cloner can be used to do incremental backups after the initial backup - but I don't use that, either. I'm old school - after the inital cloning for backup, I do manual backups of files on the fly.
Comments -
* I would suggest keeping both Snow Leopard and Lion on the internal drive. Reason - even though firewire 800 is fast, it is still noticeably slower than an internal drive. OS's on an external drive will run slower than those on an internal drive.
• I don't like the concept of Time Machine. Amongst other things, it seems to want more space on the target volume than it actually needs; and it is not a bootable replication. A clone of a bootable volume is bootable.
• It was just a few days ago that I went through the same process as you are planning. One slight difference - I used a 1.0TB external partitioned into 3 equal volumes, since I had no need to allow space for Time Machine. I have Snow Leopard and Lion each on its own partition of the internal drive; and cloned backups of each on the external drive, plus one GP partition on the external drive.
• If you have not yet downloaded Lion, be prepared for it to take a while; it's almost 4GB in size. Probably be a good idea to defeat sleep for the duration.
• Cloning takes a while, but not that long - it took 30 minutes to clone 45GB to the external drive, and 45 minutes to clone it to the second internal partition. -
Do I need Java 8 or should I disable it? What happens if i disable it? And what is the difference between Java and Java Runtime?
There's no difference. They're both runtime plug-ins (they run when an app calls for Java functions).
You only need Java if you either have Java apps on your Mac that won't run without having it installed, or you use trusted web sites that require Java to function (getting fewer and far between). Otherwise, you have no need for it at all. -
What happens to my apps, iTunes card, and iCloud storage if I change my Apple ID?
What happens to my apps, iTunes card, and iCloud storage if I change my Apple ID?
Depends upon what you mean by change.
If you update your existing account to have a new primary email address then you shouldn't lose any of the account's past purchases, balance, or iCloud storage - you may have to log out of the old version of your account by tapping on it in Settings > iTunes & App Store and then log back in with the updated version, and similarly for iCloud (Settings > iCloud > Sign Out).
If you create a new account then your existing account's purchases, balance and iCloud storage will remain tied to the existing account, you can't transfer them to a new account or merge the new account with the old one. -
What happened to the Just for you section ?
What happened to the Just for you section ?
I don't care about whats hot.
I don't care what the staff picks
iTunes is starting to get lame
Quad G5 Mac OS X (10.4.8)It seems to come and go as it pleases with me. Sometimes it's there and other times it isn't when launching iTunes and going to iTMS.
-
What happened to "Save As" for pdfs in Lion?
What happened to "Save As" for pdfs in Lion? Now there's "Save a Version" which doens't appear to do anything, and Duplicate, which seems redundant...
How is this new approach saving me time?It's not, but it's Apple.
Apple's approach with its Versions and Autosave features is to do away with the need to Save As altogether since the system's default "Save" feature already does this.
As you make changes to a document, the system should continuously save all prior versions of it automatically, and you should be able to access these at any time and then duplicate it to continue working. In this way, the system is to an extent always performing "Save As" commands and leaving prior versions in the past, so instead of proactively saving a new copy to preserve your current layout, this layout should exist as-is which you can go to by browsing the saved versions, and then duplicating to a new document to continue working if needed. -
What happens when we delete trillion records and issue a commit.
Q1. what happens when we delete trillion records and issue a commit and also is there any way to calculate that how much time this commit will take to complete the process?
Q2. how do interpret the oracle execution plan?
cost, cardinality, rows, etc...dba wrote:
Q1. what happens when we delete trillion records and issue a commit and also is there any way to calculate that how much time this commit will take to complete the process?Since you're modifying the blocks, Undo will be generated for the modified data and change vector will be recorded in the redo log buffer.(and surely your records will be deleted ;) )
The timing of a Commit doesn't depend on the size of transaction.
dba wrote:
Q2. how do interpret the oracle execution plan?
cost, cardinality, rows, etc...Oracle documentation should help you, just google for that. You should also visit 'asktom.oracle.com' for the topic. I'm going through a book 'Troubleshooting Oracle Performance' written by Christian Antognini and I feel it contains very good explanation on such topics.
Regards,
S.K. -
What happens if i erase all content and settings?
I want to restore my iphone again on itunes, what happens of i erase all content and settings?
Erasing all content and settings will set your iPhone up just as if you took it out of the box software-wise. It will go into setup mode - ask you for a WiFi network to join, ask for your Apple ID, set up the telephone, and then ask if you would like to set up as new or restore from a backup.
-
What happen if i lost my iphone and i cant get in on my icloud, it says that i have a valid apple id but i dont have acces to the icloud
Hi tinashah817,
Was this book downloaded using iBooks, or from another application? If it was from iBooks you will need to install that application to delete it.
See this article about managing your iBooks library on your iPhone -
iBooks: Tips for managing your iBooks library and storage on iOS devices
http://support.apple.com/kb/HT5544
Once the book has been deleted from the iPhone you can uninstall the iBooks application if you so desire.
How do I uninstall an app?: Apple Support Communities
https://discussions.apple.com/thread/4392015
Thanks for using Apple Support Communities.
Best,
Brett L -
Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.Consider MS System Center 2012.
Rgds -
How to find out what are the interfaces used for Job and Job Codes
HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
SunnyHi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya -
What are the table names for CRM and APO?
hi friends,
what are the table names for CRM and APO?
Regards
suneel.hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download -
BB Link does not recognize Outlook as a source for calendar and contact sync
When setting up BB Link for my BB Classic it does not recognize Outlook 2013 (on Windows 7) as a source for calendar and contacts.
I know there are people who can and many who cannot, never saw a resolution yet, I hope someone who can will reply to your post so that is why I am replying this sends your post back up to the top. Here is a recent user who can but does have a issue: http://supportforums.blackberry.com/t5/BlackBerry-Link/Duplicate-Calendar-Entries/td-p/3108949 I wish I could do more but I do not use Outlook or BB Link.
Maybe you are looking for
-
How to disable detection of duplicate messages in Lion Mail?
When Mail in Lion detects duplicate messages in a mailbox, it groups them together and shows the link in the header "x Duplicates", where x is the number of duplicate messages found. When that link is clicked the duplicate messages show in the mailbo
-
Logical table does not join to any logical table
HI, I want to implement Business Unit hierarchy for drill down in OBIEE so I've created a custom table with the hierarchy information, I've imported that table in the out-of the box physical schema & defined a relationship between the W_ORG_D table
-
Hi all, I have an FLV file convered t in HD-H.264 video. So can an somebody please let me know which format I must choose at Easy Setup on FCP to edit my file. I've try some but I think I used the wrong one because when I apply effect on it come Unre
-
I can't go to any websites and keep getting this message above...
-
Why don't Audiobooks appear in a New Playlist on iPod?
Hi! When I make a New, very basic playlist in iTunes (as I have many times) I know I can put anything I want in that playlist and iTunes will play it. The problem is that once I create a list and place actual Audiobooks in it, those Audiobooks do not