What happened to fill light in Camera Raw 7? I miss it.

Fill light seems to be missing in Camera Raw 7...how to substitute for it?

If you really, really want it back you can force the conversion to use process 2010.
But try Trevor's suggestion, and especially try taking the time to unlearn the old way and get used to using all the new controls. I'm finding it easier to get good results more quickly with the new setup.
-Noel

Similar Messages

What happens when the light goes off on an express airport router?

I was on the internet using a wireless connection with an express airport and suddenly I heard a sound and the light on the router went competelly off. I would like to know what happened. I unplugged the airport and plugged in again on another outlet but nothing happens. The airport has about 3 or 3.5 years.

It's not possible to know exactly what happened within the AirPort Express unless you carefully saw the case open along the seams to examine the internal components.
It's likely that something in the power supply section has failed since the device will not power up. Repairs...if possible.....would likely cost more than the cost of a replacment Express, but if you are handy with small electronics repairs, you could poke around a bit to take a look for something obvious.

What software is needed to read camera raw files from a Canon 5d mark III in elements 9?

Which camera raw software version do I need to down load in order to read mark 3 raw files in elements 9? Thank you for any help.

The camera requires at least Camera Raw 6.7. The latest version that is supported in Elements 9 is version 6.5. So, aside from upgrading to a newer version of Photoshop Elements, your alternative is to download and use the free DNG converter from Adobe. What operating system are you using?

HT1407 what happens if the light doesn't cut on when you put it on the charger?

What happens if light light doesn't come on when you put it on the charger, but it works on the computer? What does that mean?

Some basics please, what vintage is your MBP, have you plugged anything else into the wall socket to verify that it is live? which light doesn't turn on, the charger or the MBP?
Hold the power button down for 15 seconds, wait for 2 then press it normally and see te MBP it turns on

What is the difference between PSE11 Camera Raw and Lightroom 4?

Is the version of Camera Raw in Photoshop Elements 11 and Lightroom 4 the same. Does camera Raw have the same features and look in both applications?
Message title was edited by: Brett N

Photoshop and Lightroom basically have the same feature set as far as Camera Raw. Here is a comparison between Photoshop and Photoshop Elements:
Adobe Camera Raw differences between Photoshop and Photoshop Elements

Camera Raw 6.6 missing functions

I use PSE 10 with Camera Raw 6.6. It appears to be missing functions such as the paint brush and the ability to mask. I've tried downloading it again, but the additional functions did not reappear. Any suggestions?

Masking is only available in conjunction with sharpening under the detail tab. Hold down the alt key whist dragging the making slider to see how sharpening will be applied to edges.
There is no adjustment brush tool available in the Elements version of camera raw. It’s only available in CS6 or Lightroom.

What happened to the Light Room red screed import problem thread?

I was about to purchase Light Room to use with my elements 11 and found this thread very interesting. Where did it go?

big sandy lake
I have just added some findings on the red frames of the .mp4 slideshow from Lightroom 5.4 Slideshow Module, as seen in Premiere Elements 10 Windows.
http://forums.adobe.com/thread/1453087?tstart=30
I can confirm the red frames seen in Premiere Elements 10 by LarryER when he edits his .mp4 slideshow (1080p .mp4 Lightroom 5.4 Slideshow Module).
But, I do not see this in Premiere Elements 10 when I am editing my own .mp4 slideshow (1080p .mp4) created in my tryout Lightroom 5.4 Slideshow Module.
ATR

HT201178 What happens if the light is solid and then blank

My apple wireless keyboard I got 1 month ago and I dropped it yesterday and the light just stays green then nothing it will not connect with anything

Hdello:
After a brief period, the light does go out (normal). However, dropping it might have damaged the device.
Barry

Camera RAW 4.0 missing features that were in Beta!

I'm confused!
I've discovered a very important setting missing from the released version of the product.
The Shadows and Highlights check boxes are missing, only Preview is available. With out Highlights, using the Recovery Slider is a guessing game.
Maybe I've just missed something, but I haven't found anyway to make them visible.
Thanks

Ricardo, I'm not certain what you are referring to. Are you asking about the Shadow and hightlight warnings? The on/off buttons for those are now in the uppper left (shadow) and right (hightlight) corners of the histogram.
If you are referring to something else please describe where those are.
Thanks!
John

PSE 8 - Camera Raw plug-in no longer loading

Hopefully someone has run into a similar problem and help set me straight. The way I've usually been processing my RAW files (.CR2 from a 60D) is by opening them in the organizer (adding to the organizer, highlighting, then right clicking and clicking "edit with Photoshop Elements"). Usually this loads into the Camera Raw viewer, allowing me to do quick edits of White Balance, exposure, etc. Today I tried to do this as I always do and instead of launching the Camera Raw viewer, it has been simply opening PSE 8 and opening each picture into sub-windows. Not fun when I'm doing 50+ pics at a time.
Any help is appreciated! I'm wondering if some setting was changed that is telling it to just open the files as regular instead of RAW files.

Have you changed your screen resolution?
What happens if you load the camera raw file using the elements editor; File>Open?
MTSTUNER

No matter what i try i cannot get Photoshop or Bridge to open Camera Raw Filters, how do i fix this?

no matter what i try i cannot get Photoshop or Bridge to open Camera Raw Filters, how do i fix this?
I have windows 8 and ive tried everything i can to open it but it refuses to let me.

Let's get some information first.
What is your version of Adobe Camera Raw, Bridge, and Photoshop?
What files are you trying to open in ACR? If Raw, for what camera model?

Instruction for camera raw (ACR)

I recently started to shootraw with Nikon 7000. When I open NEF files, it prompts camera raw (ACR).
I see a lot of new parameters, like Fill light, Recovery, etc.
When I looked up Photoshop Help, I could not find information on the use of ACR.
I have no idea what Recovery or Fill light is used for.
Where should I look for the instruction?

I open Photoshop Help, type in camera raw into the search box, check the [ ] Adobe reference only box, and hit return. I get all kinds of Camera Raw documentation, including Open images in Camera Raw. This seems like a good starting point and has the link Work with Camera Raw in it.
http://help.adobe.com/en_US/creativesuite/cs/using/WS43B6DFCC-DBBE-4a9a-A985-7871DF914288. html
Did your Adobe Community Help tool not turn this up?
This looks like a good top level links page:
http://help.adobe.com/en_US/creativesuite/cs/using/WSD040CF04-C176-4ecb-8A8E-155FBA26AA77. html
As far as using the individual sliders... Just move them around and see what they do visually.
-Noel

Adobe Bridge CC with OSX Yosemite - and i cant open RAW Files in Camera Raw. Does anybody have the same Problem?

If i try to open any File with Camera Raw exactly nothing happens.

What exact camera make and model?
What specific, exact version of Adobe Camera Raw (ACR) plug-in?
What specific, exact versions of Bridge and of Yosemite?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How iPhoto handles Camera RAW images

Ok, so iPhoto can import Camera RAW files from supported cameras. But then what happens to them? This is what I think is happening when I edit imported Camera RAW files from my Canon Digital Rebel (not XT). If anyone has anything to add, I would appreciate it.
1. When first imported into iPhoto, the image is untouched and shows as "Canon Raw" with its original size (approx 7MB) in the information window.
2. If you have an external editor (like Photoshop Elements) setup, double clicking the photo causes iPhoto to create a new JPEG image with the same dimensions as the original and about 2.2MB in size. This JPEG image is what is opened in the external editor.
2a. The same thing happens if you edit inside iPhoto.
3. After editing a RAW image (i.e. creating a JPEG as above), the iPhoto library still shows the image name with .CRW, but the information window now says the format is "JPEG Image (from Canon Raw)" and the size is about 2MB. The edited JPEG image is what is shown in the iPhoto thumbnail.
4. If you now Share->Export the image, when "Original" is selected in the Format popup menu, the unedited RAW image is exported.
5. If you want to export the edited image, you need to select JPEG from the Format popup menu when you select Share->Export. Then your edited JPEG image will be exported.
6. If you drag the original unedited RAW image from the iPhoto library window to the Photoshop Elements icon in the dock, the Canon RAW image is opened in Photoshop Elements. In this case, iPhoto doesn't create the JPEG image first.
Did I miss anything?

I developed a neat workflow around iPhoto's RAW capabilities.
1. Import RAWs into iPhoto
2. Open Raws in Photoshop via dragging photos onto PS dock icon
3. Edit RAWs
4. Reduce to 8 bit
5. Save as JPEG in the folder where iPhoto stores the JPEGs derived from the RAWs, i.e. the parent folder of the 'Original' folder where the RAWs you just edited are stored, i.e. overwrite the JPEGs already present there.
6. Close the file in PS.
Now, combine 4, 5, and 6 into a PS-Aktion.
iPhoto recognises the JPEGS, but sometimes one has to click on them show the edited version. Somehow, iPhoto is still at first creating a preview from the RAW file and not recognising that there is an edited JPEG version (understandingly, since iPhoto can't remember it created edited JPEGs).

CS5 camera raw does not support Canon T2i/550D

What a disappointment to have downloaded and installed the trial version of PS CS5 only to find the ACR does not yet support the Canon T2i. Adobe, what are you waiting for?

64polara wrote:
What a disappointment to have downloaded and installed the trial version of PS CS5 only to find the ACR does not yet support the Canon T2i. Adobe, what are you waiting for?
Disappointment? I suppose if you have unreasonable (and ill informed) expectations...
The same thing happened with CS4...Camera Raw 6 for CS5 was done MONTHS ago–well before the most recent round of cameras were added to ACR 5.7 (the most recent version released a week or so ago). The exact same thing happened with CS4 and ACR 5 vs ACR 4.6 supporting more cameras until ACR 5.1 came out.
The update for ACR 6 (prolly 6.1) has already been discussed by John Nack...it'll be out in weeks vs months. In the mean time if you want to access cameras not supported bt ACR 6.0, download DNG Converter (it's free) and convert files to DNG that ACR 6.0 will open...

What happened to fill light in Camera Raw 7? I miss it.

Similar Messages

Maybe you are looking for