What happened to my display?

I dont know what happened, can you help me out solve this. There are white lines with purple strokes and display resolition is lower now. What happened?
My phone wasn't dropped at all, this happened after I've popped up LCD backlight a little bit, then reconnected the phone and turned it on. Whola, touch is not working, display is gone mad...
I can also see these stripes even when phone is turned off.
Here's the picture!
http://www.deviantpics.com/L7C

Basics from the manual are restart, reset, restore.
Have you tried those?

Similar Messages

What happens to the display if the iBook is closed when Not asleep??

I have read that closing the iBook when it will not sleep is BAD and can ruin the display. Does anyone know what exactly happens to the display in this case??

Yes it was under warranty. My husband took it into the Apple store and they told him that the type of damage that our screen had was obviously because of an accident and that voided any warranties on the computer all together so it would not be covered.
I know that there was no accident since the computer was sitting in a home office between the time I used it last until the time my husband went to use it 17 hours later. No one else was home. He noticed that the computer was not sleeping when it was closed also.
That is why I am interested in the type of damage that occurs to the screen. I have seen several times in these discussions warning not to close a screen if the computer will not sleep. These warnings usually link to a warning from Apple that doing so will cause damage to the screen.
I'm just sick at having to purchase a new iBook when the old one was only 4 mos old.

HT2531 What happened to the display of where a file may be found in the finder?

In Spotlight, what happened to the presentation or where a file may be found? We used to have a reference to a finder location, now there is just a mini image of the doc. This document info is one of the things that Windows still does better?
Jaggerdog

Hold down cmd or cmd+option while hovering over file.

HT2905 What happened to the "Display Duplicates" in iTunes 11?

Just updated to iTunes 11 and thought I'd do a little cleaning up. But I can't find the File > Display Duplicates or better yet, the File > Display Exact Duplicates. Is it gone? Or is there now a different (hopefullly better!) way to get rid of duplicates in iTunes 11?

The show duplicates/show exact duplicates features have been left out of iTunes 11. Rumor suggests they will be restored in the next build. In the meantime I have written two Windows scripts to make playlists of Duplicates and Exact Duplicates, either from a selection of tracks or the entire library. Note that, as with the iTunes feature, this list makes no distinction between "originals" and "dupes", you have to decide which is which.
There is also my DeDuper script for automatically removing duplicate copies but keeping one remaining copy of each set. This can preserve ratings, play counts, playlist membership, etc. which are lost in a manual clean up. Please take note of the warning tobackup your library before deduping. See this thread for background on deduping and the script.
If you want to manually remove duplicate tracks use shift-delete to remove selected tracks from the library as well as the playlist. Keep one of each repeated group of files and don't send the others to the recycle bin unless you are sure that there are multiple files on the disc as opposed to multiple entries to the same file. Same advice tobackup applies.
tt2

What happened to my display name?

I had a display name specified, but after today's forum downtime, my posts only display my original login name.
Anyone else seeing the same...?
P.S. yes, I see that 'jochemd' is now only 'jochemd'.

jochemd wrote:
My Forums profile was reset to displaying my username instead of my full name too. That is fixed now.
Well, I'm not seeing your full name right now:
And I am also seeing this:
which includes a previously non-existent underscore between my first and my second names.
Addition: I have just noticed this, which is wrong:
and the information displayed when I hover over my name includes some garbage for my email address, which I don't know if it can be used to reconstruct my address, which I have asked to be kept private.
Message was edited by: Claudio_González, Reason: addition.

I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.

I have a problem that I try to turn on the iPad 2, but he was just lighting up, but nothing is displayed. I do not know what happened, but yesterday did not do this. Thank you for your help.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

A friend bought second hand macbook air mid 2011 with crossed circle on the display, we tried recovery from partition and same thing happened, after internet recovery it stays the same except now it asks for password for boot option, what happened?

A friend bought second hand macbook air mid 2011 with crossed circle on the display and give to me to try to recover the system, I tried recovery from partition and same thing occured, after internet recovery it stays the same-crossed circle after reboot, then we tried to boot from USB with mac os 10.8 on it, it installs something,like it has being finishing installation, rebootes, and now it asks for password for boot option.We have no idea what that password could be.What happened!!!

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

My sent messages are not displayed...what happened and how do I restore?

My sent messages are not displayed...what happened and how do I restore?

http://kb.mozillazine.org/Disappearing_mail

What happened to "options" in the displays pane?

Each month I calibrate about 40 Cinema displays with a Monaco Optix system. For the ones on Macs, about 20, I lock out the brightness buttons using the options tab in the Displays pane in System Preferences. They all running OS 10.4.9 or 10.4.10. All of the displays are the newer model 23" displays.
When I made my rounds this month one of the systems no longered offered the options tab though it did have the ability to rotate the screen, something not available on any other system. This was not the case last month.
Since I couldn't unlock the buttons on this system, I couldn't calibrate the monitor.
So here are my questions:
1. How can I get these buttons unlocked so I can calibrate this screen?
2. What happened and how do I fix it?
Thanks for any help you can give.
CM
Mirror Door G4, 23" Cinema display Mac OS X (10.4.9) Using Monaco OPTIX xr calibrator.

I figured it out.
The USB cable that feeds the hub in the back of the monitor is damaged.
Any cinema display will fail to show options if the USB cable is disconnected or broken.
CM

What happened to the 30 inch Cinema display?

What happened to the 30 inch Cinema display?
I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
Any suggestions, for a 30 inch display?

No suggestions, apart from changing to a non-Apple display such as a LaCie one.
I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
2. we have gotten used to 30" and do not want to downgrade.
I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
Suzanne

What happened to my T61 display?

I have a wide-screen model T61. Recently I traveled with it. I carry it in a soft "Lands End" bag.
When I arrived at my destination I discovered a strange pattern on the display. Starting near the center are two roughly circular areas. One is approx. 1 inch in diameter; the other 1.5 inches. The second one is to the right and slightly below the first. After booting my TP, these two areas are black. Extending from them vertically and horizontally (to the right) are many straight multi-colored lines. Nothing on the display is readable in this area. Only the left 40% of the screen is readable; If I guess correctly, I can drag windows over to the left side to read them. I subsequently discovered that, when the TP is turned off, the two roughly circular areas remain faintly visible on the black screen.
Do you have a theory of what happened and what I should do about it?
Thank you.

One method would be to host your picture(s) externally on a site like Flikr and provide a link to the picture in your post.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Display or hide an af:panelHorizontal, what happens to child elements?

Based on a value in an af:selectOneChoice, I want to either display or hide an af:panelHorizontal element.
1.) How do I do this with the partialTriggers attribute, do I use the render attribute?
2.) What happens to the child elements inside of the af:panelHorizontal, are those displayed as well?
If the af:panelHorizontal is displayed, can I access the children in the managed bean?
Thanks,
--Todd

Well, I believe I figured it out.
Each of the components in question had the rendered attribute set to a Boolean type field in the managed bean.
By default, the field value was false.
In my JSF 1.2 beforePhase event, I was setting the value to true based on a logic within the method.
"That worked."
So, everything was rendering or not rendering when I wanted it too.
But - as soon as I tried to get the user's values - typed or selected - in the components, I would get null or default values instead of the user's values.
I tried a lot of different approaches, I tried getting the user values through the value and binding attributes and nothing worked.
So, I removed the rendered attribute to the components in question and I could get the values.
"Strange"
So, to solve the rendered or not rendered logic requirement for the page, I went through the binding instead, such as:
<af:selectOneRadio id="failoverFTPFileNameCase"
label="#{common.labelFileNameCase}"
partialTriggers="failover"
binding="#{routingRule.failoverFTPFileNameCaseSelectOneRadio}">
<f:selectItem itemLabel="mixed" itemValue="mixed"/>
<f:selectItem itemLabel="lower" itemValue="lower"/>
<f:selectItem itemLabel="upper" itemValue="upper"/>
</af:selectOneRadio>
And just set the rendering in the managed bean with:
this.failoverFTPFileNameCaseSelectOneRadio.setRendered(false);
Plus, I got the value with:
oFailoverFTPFileName = this.failoverFTPFileNameCaseSelectOneRadio.getValue()
"And Violá, it worked!"
I could get the value of the component and fulfill the rendered or not rendered logic.
"Why this is, I'm still trying to figure that out"
Thanks,
--Todd

HT1430 My iPhone display sometimes getting bigger than normal size. So big sometimes that I can't use it and I must turn it off. Anyone know what happened ?

My iPhone display sometimes getting bigger than normal size. So big sometimes that I can't use it and I must turn it off. Anyone know what happened ?

You most likely have zoom on. Double tap with THREE fingers to turn zoom off, if it is on, then: Settings>General>Accessibility...turn it off for good.

I don't know what happened, all of a sudden, the content of here body of my email is not displayed. I can only see the preview lines. I must have inadvertently touched some thing, any idea what happened?

I don't know what happened, the body of my email was not displayed any more. I must have unknowingly pressed something on my I Pad to cause this to happen ? I can read the preview lines ok, but not the mail itself, any idea how to fix this?

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Or...
Double tap the home button to bring up the Recents List
Tap and hold any icon until it wiggles
Press the red to delete the Mail app
Press the home twice button when done.

What happened to the Large and Display choices when exporting?

What happened to the "Large" and "Display" choices when exporting slide shows?

They were removed.

What happened to my display?

Similar Messages

Maybe you are looking for