What happened to my formatted text???

Aftre upgrading to 08 som text oon my website is unformatted after publishing, but in iWeb it looks as it should be.
Picture of iWeb before publishing
and after publishing it looks like this.
Anyknow what I'm missing here?
Regards,
Mats
Message was edited by: Stadiumbowl

Same problem here.
List of songs on our repertoire page had song title and artist separated by using the tab key. Now they're all bunched up together. The only ones not bunched up were separated by using the space bar. Using Avant Garde font. Tried copying into Pages to reformat, then pasting back into iWeb, but to no avail.
Looks good in iWeb, but no good in Safari.
It all worked with the earlier iWeb.
See it here - www.souziandthecoolmints.com
Go to the repertoire page

Similar Messages

What happened to importing plain text files in iTunes?

I used to be able to export the playlist containing all the music I wanted to listen to as a plain text file. I would then import this file into a spread sheet, sort as I desired, assign each song a number, sort on that number and save the resulting groups to plain text files. I would then import these text files as playlists. It appears that this capability has disappeared in the current version of iTunes. I am capable of working with the xml if I have to, but that is more effort than I think is necessary. Have I missed something?

I have been thinking about what you are suggesting and even with your last reply it does not solve the problem. I suspect you still do not see what I am driving towards. I have playlists for all songs with 5 starts, all songs with 4 stars, all songs with number of plays less than n. I also have playlists of those three that have not been played in n days. I listen to those sometimes. I also listen to my existing playlists which contain subsets all music not christmas and have at least a 3 start rating. This last set is not smart at present. With the current setup, music in those first 3 playlists get played more often. Any smart playlist that has to include not played in the last x will not play those songs more often unless I play those playlists more often. At present, to generate those non smart playlists I export, divide, and import information. Apple has changed the format it accepts on input. I either have to accept their new import method and start programming, or find a smart playlist method that solves this problem. I do not believe that anything yet suggested for smart solves the problem. The closest I have come is 3 playlists. One smart and two dumb. The smart one is all songs with rating above 3 and not christmas that have not been played in last x and is not in the two dumb ones and limit to 100. The dumb ones start empty. Let it populate, drag the list to one of the dumb ones. Let the smart one recompute. Drag it to the second dumb one. Play one list on each device. When playlist finishes, blank the dumb one for that device, sync, let iTunes repopulate the smart list, drag to dumb list and sync again. In the long term, I think I am better off programming.

What happens when you format your iPod in windows?

I had been having major problems with my iPod... you know not getting recognised on the PC. I read a thread that said format it. So off I went thinking that the iPod still didn't work on the laptop. connected the ipod tried a restore, but was told there was an error. remembered someone writing that an ipod could be fromatted in windows to solve the problem. did that, updated itunes. laptop asked again to restore then came up that the ipod was not recognised in the restore program. all I get now on the ipod screen is the apple and a folder with exclamation saying www.apple.com/support/ipod. what do I do from here?

On in this case, have a read the following:-
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
http://www.kokopellimusic.us/KM_instructions.htm
Have I tried this myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

What happened to my "Format" Pull-Down RoboHelp menu?

I am using RoboHelp 8.
The normal "Format" menu view disappeared -- and now the only choice available is "Apply Conditional Build Tag."
Does anyone know how to restore the menu to the normal view?
Thank you in advance...

The default view for "Format" suddenly appeared again -- I can't find "Complete Menus," though, at least in the "View" menu.

Keyboard Works OK - But what happened to Copy/Paste Text?

Ability to Copy/Paste Text is a MUST if you want to search the Internet...
Jose Morató
Miami, FL

It's a must if you want to be able to maintain lists on your phone and freely/easily re-org them at will.
Unless they gave us a drag-able checklist like Apple's insanely great Notes & collapsible checklist/outliner feature from the Newton (see <<a href="http://en.wikipedia.org/wiki/Apple_Newton#Notes">this>) then I'd be happy.
We presume someday you'll be able to request stuff like this for iPhone via
http://www.apple.com/feedback/

What happens to my saved texts if I transfer to an android phone?

I have quite a few text conversations that I will be sad to see go if deleted. However, I am due for an upgrade and considering switching to an android.

Google an app that will backup your text messages. There are 100's of them. I use iBackupBot.
FYI - if/when you switch to Android, do yourself a favor and disable iMessage first before disconnecting your iPhone.

What happened to my choice of 3 suggested or predicted words when texting a message

What happened to my quick text of 3 predicted words when texting? How can I get it back on my phone?

settings - general - keyboard - predictive - ON

EWS: EmailMessage.Body.BodyType can be either of HTML or Text. What happens to RTF messages?

Hello,
EmailMessage.Body.BodyType can be either of HTML or Text. I know that Outlook can create RTF messages. So what happens when a message includes an RTF body?
Thank you,

If the Message was created with in Outlook with the RTF editor what happens when you access the Message using EWS is that the Exchange Store will do a onthefly content conversion of Message body and provide you with HTML or Text. Simulary if a Message
is sent with the text only body when you request the HTML body for this message the Exchagne Store will return a converted body for you. If you want the RTF body you can get it from the PR_RTF_COMPRESSED extended property. (if the body was converted from
another format whether it was to or from html to RTF there should be meta tags left in the content to indicate that).
Cheers
Glen

TS4036 I have backed up my phone to icloud, photos, music, contacts, but now most of my contacts don't show up on my actual phone, and all I have on the text is a phone number instead of the person's name. What happened?

I am new to the icloud, and I have a question. I have backed my phone up to icloud, with photos, music, contacts, etc. but now most of my contacts have disappeared on my actual phone, and when someone sends me a text, just a phone number shows up instead of their names. What happened? How do I get all of my contacts back on my phone?

Welcome to the Apple Community.
Do you see all your contacts on a computer at...
iCloud.com

What happens to data after formatting hard disk?

Hi, I'm currently have a iphone and ipad... and is running my iTunes on Windows OS.
My question is, what happens to the data in apple products after I format my harddisk and reinstall iTunes. Will the data get lost after I connect my apple products to the newly installed iTunes?
Data of concern:
Downloaded Applications --> Do I have to download them again in iTunes?
Music --> Will the music be overwritten and removed during Sync? (I suppose the same applies to Photos and Videos)?
Contacts --> Will my contacts be removed?
Thank you very much in advance for any useful feedback. (:
Cheers!

HI and welcome to Apple Discussions...
what happens to the data in apple products after I format my harddisk and reinstall iTunes.
As long as your photos, music, contacts, and videos are reinstalled on your computer, all you have to do is connect the iPad and re sync everything.
Carolyn

I have a pc and have had to format the hard drive 4 times. What happens after the fifth computer is singed on to itunes?

I have had to format my pc hard drive 4 times.
What happens if you have to sign a computer on itunes after the fifth time?

Nothing "happens"
You failed to deauthorize before reformatting all 4 times?
If you have reached the limit and need to authorize, then you will need to deauthorize all, then authorize the active computers.

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix it? I'm trying to upload the PDF version to Vistaprint. Thanks.

Reader doesn’t create pdf files. You can use Acrobat (ask in that forum) to create pdfs. You can subscribe to the Adobe PDF Pack which has a create pdf functionality (please ask in that forum), or you can use a third party utility such as ghostscript, cutepdf, or Microsoft’s own PDF creation capability. For third party pdf creation you will need to ask in a forum dedicated to that software as fellow users of Reader are unlikely to have the knowledge to help.

HT3529 When texting with other iphone users, the text used to be in a blue bubble. Now it's green. What happened? Am I being charged for these text messages now? I'm with Verizon if that matters.

When texting with other iphone users, the text used to be in a blue bubble. Now it's green. What happened? Am I being charged for these text messages now? I'm with Verizon if that matters.

Thanks for the help, Allan Sampson.
I updated itunes, shut the phone off and on, it still didn't give me blue bubbles. Kept following the suggestions on the page ... I didn't know there was an IMessaging switch, but, shoot, it was OFF. Anyway, I toggled it on and now the text bubbles are blue again.

What happened to command control D over text?

In Snow Leopard and Lion, you could hold down command control D over text (try it in TextEdit or Safari) and the definition for the word would pop up.
What happened to this? Why is it gone? How can this be restored?
Anyone?
It is so bothersome when functionality you've been using for years mysteriously goes away.

Alex Zavatone wrote:
OMG. Now it does it on the release of the keys. Previously, you had to wait for it to display.
I'm still on Lion and the definition doesn't appear until you release the keys. I tested it in Safari and TextEdit. I think your mind is playing tricks on you!

My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

What happened to my formatted text???

Similar Messages

Maybe you are looking for