What happened to my Voice Input option button

My microphone was present on my keyboard and now it's not. I go to Settings/Language and Input/etc. etc. This is the message next to VOICE INPUT option that is grayed out "no voice input methods enabled. check Lang and input settings". I downloaded the Google keyboard and the same problem exists.
Why did the microphone key disappear? I can't put it back by the methods I have found using Google Search because I don't have the VOICE INPUT option. This is ridiculous. I loved using the TTS option. Now I can't. I've only had my phone a few months.
Galaxy Note 3.

Having the same problem on my 3Gs after upgrade.
The voice memos are NOT in iTunes but when the phone is connected to iTunes i can see and hear the voice memos on the iphone menu inside iTunes.
So it looks like the memos are still in the phone but somehow invisible... and now?

Similar Messages

  • My voice input option in the keyboard has disappeared ..i am using iphone 4s

    my voice input option in the keyboard has disappeared ..i am using iphone 4s

    Three places:
    1.  Setings > General > Cellular is in the second block of access buttons.
    2.  Settings > General > About > Network tells what network you are on, and Carrier tells who your cellular service carrier is.
    3.  Settings > WiFi ON for wireless network access, then Choose a Network to select and attach to a wireless network.

  • Just upgraded to  Safari 6, What happened to the "Empty Cache" option?

    JUST CURIOUS, WHAT HAPPENED TO THE "EMPTY CACHE" OPTION IN SAFARI 6?

    Go to safari preference/advance and add the develop drop down menu. Empty cache is there.

  • HT1879 What happened to the power search option?  Has it been deleted or moved and I just can't find it.

    What happened to the power search option?  Has it been deleted or has it been moved and I just can't find it.

    you haven't lost anything, it's virtually impossible to delete your Zotero library by accident.
    You may just need to show your add-on bar (View --> Toolbars ---> Add on Bar).
    To check if Zotero is disabled, go to Tools--> Add-ons --> Extensions.
    Make sure to check for Zotero updates, you may need the newest version (2.1.10) for FF6 compatibility.
    As a general piece of advice, if technical problems make you frantic, don't perform major software upgrades in the middle of a project. Also, support for Zotero is better on the Zotero forums than here.

  • What happened to the Audio Books option?

    What happened to the "audio books" option in "music" under the "more" option on the lower left of my iPhone 4s?  I have been syncing downloaded non-iTunes audio books for years without problems - until now. I have read lots of solutions while searching for an answer and none of them have worked. Any ideas? What is Apples official response? Many seem to share this problem.

    1) To see your audiobooks in iTunes, there's a dropdown on the top left to select the Library it's displaying. Use the dropdown to select Books, and it will show them (you can choose Audiobooks, Books, PDFs, etc.)
    2) To see your audio books in the iPad/iPhone -- when you have your iDevice connected to the computer with iTunes check your sync settings to make sure they're correct for what you want to do. They may have gotten switched behind your back.
    3) iTunes match - fraid I can't help you there. My Itunes computer is still on Snow Leopard, no iCloud for me.

  • What happened to the Initial View options under Document Properties??

    What happened to the Initial View options under Document Properties? I just updated my Reader and it's no longer accessible! SOS.

    Hi kga406,
    Please tell me if you are able to access 'initial view' tab in document properties using Acrobat.
    You can change initial view settings only in Acrobat and can view PDFs in Reader with the same initial view as set.
    Regards,
    Anubha

  • What happened to my hot spot option?

    What happened to the hot spot option under general settings

    Your carrier doesn't support it, or you're not paying for it.

  • What happened to the Blu-Ray option under the Share menu in FCPX 10.0.6?

    what happened to the Blu-Ray option under the Share menu in FCPX 10.0.6? The Share menu is now buriedn on the Fil menu and there's no Blu-Ray option for burning AVCHD to a Standard DVD for play on a Blu-Ray player.

    Select Add Destination. Blu-ray is in the Destinations preferences.

  • In Labview 8.5, what happens if the signal input exceeds the signal input range set by the DAQ Assistant?

    Hello all,
    This should be a pretty simple question, but I can't seem to find the answer on-line and don't currently have the capabilities to test this:
    I'm using LabVIEW 8.5 and have a VI that imports sensor data through the DAQ Assistant. In the configuration tab there is a signal input range. What happens if my sensor exceeds this range? Will I get a warning? Will the value default to the maximum (or minimum)? I was interested in writing in some code to display an error as I approach the limits of this range, but was unsure if I also needed to include some code to display an error if the range is exceeded as well.
    Thanks for the help,
    Tristan
    Solved!
    Go to Solution.

    Hello Tristan,
    The behavior depends on the range you choose and the device you are using.
    If you are using a device with only one valid input range, we will use this range even if you set a smaller minimum and maximum in the DAQ Assistant.  Thus, if your device only supports ±10V and you set the range to ±8V, you will still continue to get valid data after your sensor exceeds 8V until you approach 10V.  Once you reach the limit of the range of your device, the output will "rail" and just return the maximum value until the signal drops below the maximum again.
    Note: A device that is nominally ±10V usually has some overshoot (like ±10.2V) that is typically specced in the manual.
    However, if you are using a device with multiple input ranges then things get more complex.
    The NI-DAQmx drive will pick the smallest range that fully encompasses the range you choose.  So, suppose your device supports the following input ranges: ±0.2V, ±1, ±5V, and ±10V and you choose 0V - 3V as the range in the DAQ assistant.  The NI-DAQmx driver is going to look at your input range and the list of input ranges that your hardware supports and choose the smallest that encompasses the full range you set.  This would the ±5V, because that's the only range that contains up to 3V.  As a result, any input signal between ±5V will be returned and any outside this range will "rail" to either the maximum or minimum value.
    We do this because using smaller ranges make more effective use of the resolution of the ADC.  Thus we try to use the most efficient range based on what you request without picking a range that will cause you to miss data.
    Let me know if I can clarify this further. 
    Seth B.
    Staff Test Engineer | National Instruments
    Certified LabVIEW Developer
    Certified TestStand Developer
    “Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams

  • What happened to all of the options under Site Manager?

    There used to be tons of options under Site Manager:
    Pages
    Page Templates
    Module Templates
    Content Holders Menus
    Web Forms
    File Manager
    Etc.
    Now I only have two:
    Web Forms
    System Emails
    What happened to all of the extra options, and how do I access them now? Seems like it only happened since the BC updates.
    I have an Ecommerce BC Plan, so I should have everything.

    Turns out it was something simple. I created a ticket, and got the answer back. I clicked on "my details" under my name in the top right. I then checked and enabled "content editing". Somehow it must have gotten disabled because I was using Muse.

  • What happened to Artist, Genere, Composer, etc buttons?

    What happened to the black buttons from iTunes 8.0 which included "Artist", "Genere" etc ... as seen in this screenshot (at the top) http://www.megaleecher.net/uploads/iTunes-8-Pwnage.jpg

    Nevermind, found it after some searching.
    View > Grid View > Show Header

  • What happened to the add on update button?

    Previously the help tab would show an update feature for add-ons,
    what happened to that service?

    If you open Tools > Add-ons, you can check for updates using the "gear" icon. I'm not sure if that works exactly the same, but it's the only one I know of, besides the plugincheck site.

  • What happens when I click to "sync" button?

    If I click on the "sync" button while "manually manage music and videos" is checked in the options section on the summary page in itunes, what will happen? Will iTunes sycn everything including the music or video or will it just sync everything else? I have some songs in my iPod Touch and I don't have them in iTunes. I need to press the "sync" button, but I am afraid of losing my songs if iTunes sync the music.

    Will iTunes sycn everything including the music or video
    It will only sync what you have selected.

  • What happened to the back/previous history button? (next to the back/forward buttons)

    Hi, just upgraded from firefox 3.6 to 4.
    The main problem I have with this version which will make me go back to 3.6 if I can't solve it, is that in this version (4) there is no back history to click on next to the navigational back and forward buttons. I'm not talking about the history menu from the menu bar. I'm talking about the pathway I took to get to the page I'm on, which will be different for every tab that I have open. Sometimes if I've just gone through ebay or paypal checkouts or sent/posted questions on forums etc, I will not be able to just repeatedly press 'back' as it may resend twice, or force me to resend data to re-enter that page, even though I didn't want that page, I wanted the page that was 5 steps back prior. You know what I mean? It used to be great to use that on 3.6 to navigate around and jump about back and fore 8 or 9 pages at a time. The history button in the menu bar doesn't help me, it just tells me the last few pages I've been to overall, and not specific to that tab.
    Also, how can I customise the navigation bar? I want an icon for the refresh button back like the one in 3.6 (big, prominent, and moveable). Same for the home button, it's now stuck at the far side (I used to customise all these buttons to be as together or as central as I could).

    The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4.
    Use one of these methods to open the tab history list:
    * Right click on the Back or Forward button
    * Hold down the left mouse button on the enabled Back or Forward button until the list opens
    You can look at this extension:
    * Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/
    To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
    * Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
    * Drag the Reload and Stop buttons to their previous position to the left of the location bar.
    * Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
    * Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.
    * http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/

  • What happened to the "close tab" option in FILE in the toolbar?

    i just downloaded ff 6.01.2. the "close tab" option does not appear in "FILE."
    please advise.
    windows xp pro, sp3
    lenovo x201 laptop

    Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
    You can see the difference if you use Alt+F to open the File menu or other menus like the Edit menu (Alt+E) and Bookmarks menu (Alt+B) and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.

Maybe you are looking for

  • Dmg files are not executable - need to reinstall Lion( but will mount)

    iMac 27, 2.8 Quad Core, 16 GB RAM, 3 TB HD running 10.7.3 Hi, lead in > Lately I am having trouble with Aperture 3.2.3 who doesn't let me make some image adjustments "out of the blue". To correct this I usially have to reinstall Aperture from scratch

  • Images with news items appearing as blanks

    I am using BT Yahoo - Mozilla Firefox with Windows XP professional and Service Pack 2. There is a news section on the home page but any news item accompanied with still images (e.g Chinese New Year Celebrations on Jan 22)the images are blanked out. I

  • Why this doesn't work?

    Hi, Is there anyone who could help me debug this piece? I only get '1' in the print statement - instead of an expected 'ab1' Thanks. int RESULT; String testOut = new String(); String testIn1 = new String ("a"); String testIn2 = new String ("b"); RESU

  • WebI - free hand sql

    Hi, I am new to WebI. I am runiing BO Xi 3.1. Does anyone know how to create a Webi report using free hand sql?

  • How do I restore the background in the Itunes store to whiteinstead of black?

    When I open the itunes store, the background is black and I cannot read any of the choices wwritten on the page. Can I change the background so that I can see all of the choices?