What happened to Print Setup?

Just moved from Acrobat 9 to Acrobat X via CS6 upgrade. In the past, when I had considerable setup to do, I would go into Print Setup, and makle all the changes not only in the Acrobat print setup dialog but also the printer's properties dialog. And, this allowed for these settings to persist as long as I didn't close Acrobat. This was extremely helpful and important to me.
Now that I've moved to Acrobat X, there doesn't seem to be a Print Setup menu choice. Is there some way to enable the previous menu choice that performed the Print Setup action? Only "Print" is available, which seems to require a committment to print instead of simply setting up properties in preparation for printing.
less than happy,
mike

OK, let me pose a typical scenario regarding this.
I clicked Print, chose a different printer from the default printer, hit the Page Setup button and chose a different page size, reverse pages, print on same side, and a few others. Then, because I'm not ready to print yet (but I DO want to persist these settings!) I hit Cancel. A few minutes later I'm ready to print. I click Print, but GUESS WHAT? the default printer is now re-selected, same for the page size!
If I had Print Setp as in previous versions, I could do each of these things under Print Setup, choose OK, and these settings are persisted until I close Acrobat, without having had to print something yet!
I don't see AT ALL how this is the same. Please try this yourself.

Similar Messages

  • PS CS6 - What happened to Page Setup?

    Please help - I'm about to bang my head on the desk in complete frustration, and it shouldn't be this difficult!!
    What happened to Page setup in CS6?  I'm trying to print a document with canvas size 11x17.  When I try to print, the media box is listed at 8.5x11.  There is no obvious way to change it, and Page Setup is no longer in the file menu, or on the dialog box.
    Here's a video demonstrating my attempts - http://screencast.com/t/n5Uuae3zSzTc
    Please help!!!!
    Many thanks.

    Change the page size in print settings. But some printer drivers require that you save custom print sizes as a preset before they'll tell the application about the custom page size (lame, but that's printer drivers for ya).

  • What happen when printing hyper black?

    Hi all
    Imagine you start a new document...after create any element and fill it using C=100, M=100, Y=100 and K=100. In the Illustrator preferences I have set output blacks accuratelly. So we will have 100% of colors at all the plates in press.
    Ok..this is my question: Why would occur when printing this element hyper black? Would it "crash" the paper because it´s to much concentration of ink? or what?
    It´s a question about graphic production..not how to do do anythin in Illustrator.
    Thank you a lot
    See.

    It might be that nothing would happen; for example, if the four seps were not printed on the same press run. Suppose the four color job was run on a two color press, with plenty of drying time between runs.
    More than 300% ink coverage is not really uncommon. Spot varnish is often printed over areas already pushing the recommended total ink coverage limit; but again, that's on a separate press run after adequate drying time. Same goes for spot inks, like opaque metallics.
    JET

  • What happens in print when I do this?

    If I have a base 4/c photo, and place a white box with a 30% opacity applied to it so I can vaguely see the photo underneath, in the print process does it just 'screen back' the 4/c dots in this area to a 30% value?
    If it is a black box or blue box (set at 30% opacity), what would happen in the actual print process then?

    You can get the output values if you turn on Separations in the Separations Preview panel and mouse over an object. The panel shows the output CMYK values when you export or print to flattened Document CMYK

  • What happened to print preview and the ability to select what you want to print?

    I've tried all of the suggestions and still no print preview.

    Does this also happen if you use the Print items in the file menu?
    *Tap the Alt key or press F10 to show the Menu bar.
    Does anything open at all?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • What happened to printing templates???

    I used to print tons of photos using the "customize" toolbar in iPhoto, it offered so many amazing border and background themes.  These seem to have been removed??? Really bummed about this, is there any way to regain this function??? If not, any similar apps/programs that could replicate? The current print options are far too boring and plain...

    The borders in iPhoto are gone.
    Try the BorderFX plug-in. You can use it to add borders to your photo when exporting from iPhoto for printing. It is very versatile and lets you add text and the annotations to the photo as well.
    BorderFX - iBorderFX iPhoto

  • Printing my own photos!  Does anyone know what happened to the area on the left hand side of iPhoto when you went into printing your own photos?  I used to be able to create a page of wallets and print it from my own computer and now I can't find it.Help

    Does anyone know what happened to printing your own photos in iphoto?  There used to be a thing on the left hand side of iphoto that you used to create wallets, 5x7, etc.  Now there is nothing there.  Can anyone help me?  I dont want to order stuff, i want to pirint my own.

    what version of iPhoto?
    LN

  • I have Cs2 andOffice for Mac 2004 installed on an Os 10.6.3 system. This weekend my computer did an auto pdate to Os 10.6.8 and now I cannot save or print from any office or CS2 Apps. What happened. Office also freezes and I have to force quit.

    I had Cs2 and Office for Mac 2004 installed on an OS 10.6.3 system. Worked fine. This weekend my computer did an auto update to OS 10.6.8 and now I cannot save or print from any office or CS2 Apps. What happened. Office also freezes and I have to force quit. Any advise. System or Software problem?

    Bad timing.  Reapply the security update:
    http://support.apple.com/kb/DL1489
    What happened is that version 1.0 of the security update was available for a bit of time this weekend, and that disabled Rosetta.  Version 1.1 brought it back.

  • What happen ?why can't i print a pdf any longer ?? very very frustrated uninstalled reinstalled 3 times ??????????

    What happened ? Why can I no longer print PDF on my mac pro???????? Uninstalled reinstalled 3 times very very frustrated

    I cant print anything now from my computer to my hp printer.  Never had this happen until November or December.  Then it seemed to be OK. now today I cant print one thing.  not from my gmail, or the Matrix portal I use as a realtor.  My office partner is connected to the same printer and his is fine.  Mine prints nothing.  All I get is a print screen that says loading preview... and the .. keep moving and nothing ever shows up.  If I try to to to a PDF (which is the only way we could print anything after some update last fall from the Matrix portal) it just spins ... and nothing happens .  WE use to be able to print without having to save everything to a download and that changed.  now I cant print anything.  I need help fast.... I can't get my work done at all and I'm getting very frustrated.
    I uninstalled the adobe reader and re-installed it and nothing helps.  We have 2 others printers in our office and it wont let me print to them either or allow me to save it as a PDF so I can print it out that way.;
    I need HELP!!!  Can't work this way and not sure what happened to cause this problem as things were fine earlier today.

  • I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

    I have added photos to a portfolio website I'm building and a lot of them look VERY grainy when you click on them. They are nice clean large files and can print bat high res way over 16" x 20" so whats happened to them in iWeb?

    When you are dealing with websites, image file size is a trade off between quality and download speed. There's not a lot of point to having high quality images if they take too long to download in the browser.
    Nowadays we also have to consider the device that the end user is viewing the images on. An image that is optimized for viewing on a large screen is total overkill and unsuitable for those using mobile devices.
    Really we should be supplying different versions of media files for different devices using @media rules in the stylesheet but this is rather outside of the scope of iWeb. If you use the built in image optimizer and the iWeb Photo template with slideshow, the application will optimize the images according to the way in which you set this function in preferences and the slideshow size will be automatically reduced for those viewing it on smaller screens.
    If you want to give your viewers the opportunity to view large, high quality images, you can supply them as a download.

  • I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new  but the new dose not gave the setup that I have in my old version! What happen ?

    I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new  but the new dose not gave the setup that I have in my old version! What happen ?

    Seriously, I doubt that your answer helped Erik.  He has two issues.
    He installed the new program and has a double icon folders with software. One for the new &  one for the old.  (I have this same problem.)
    He must have attempted to open one of the products and no longer see his personal settings transferred over.  (The install will ask to have those settings migrating, but you have to accept it. eh, I could be wrong; but, that what i remembered doing.
    I concur with his first. 
    However, i can not get any of my products to work.  Ie. have to constantly click on icon to open; once open i get a unexpected error and have to close. I'm on a mac pro w/ latest os system.
    In addition, I have tried to uninstall the older by clicking on the application's manager icon.; Unfortunately, it shuts down at each attempt.  Therefore, I am unable to un-install the old product or the new. 
    Possibly, we were hoping that the new product would be simply updated if an old recent was already installed. 
    Instead, the installation simply created a new icon and the new folder with product.

  • What happened to the soft proof function for printing???

    What happened to the soft proof function for printing???

    Edward Sozinho wrote:
    Thanks Jim.  It's no longer located there.  I miss spoke I'm running Lightroom CC now.
    Then you must not be seeing the toolbar. Press the letter T to display the toolbar. I'm using Lightroom CC.

  • What happened to the Page setup menu item in the Grab Utility?

    What happened to the Page Setup menu item in the Grab Utility? It was there in Snow Leopard and gone in Mountain Lion?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • What happened to class designer and printing in JDev 9i??

    Where did the "Class Designer" go in JDeveloper 9i... It was in JDev 3.2??
    Also, I've read that the printing functionality will be put back into JDeveloper in the next release. It there a date set for this release?
    Thanks

    Are we still another release away from getting the printing functionality back?? I just downloaded 903 and it still doesn't have all the printing functionallity that 3.2.3 had?? What happened?
    Bret
    Where did the "Class Designer" go in JDeveloper 9i... It was in JDev 3.2??In JDev9i, the editors are seperated, so right-click in your code editor, and select Class Editor.
    Also, I've read that the printing functionality will be put back into JDeveloper in the next release. It there a date set for this release?Unfortunately, we don't have a firm date yet for the next release.
    Rob

  • HT1430 I would like to share and email pictures from my album in my ipad but I don't see the logo of email. I can only choose FB, print and copy. What happen to my email logo?

    i would like to email pictures from my photo album in ipad but the logo of email is not there to send. I can only choose FB, copy and print. what happen to my email logo?

    I wouldn't want to say exactly, however I would imagine that it has to do with the fact you use the same Apple ID on both devices. Since Facetime was activated on the phone, with the number, and then activated on the iPad with the email and same Apple ID, they are somehow linked. I'm not sure that you can separate it without having a different Apple ID on the two devices. Otherwise you can look at this support document http://support.apple.com/kb/TS3367 and see if that helps you any.

Maybe you are looking for

  • Adobe 5.0 PDF cannot be read in Adobe Reader 7.0

    I am on Mac OS 9.1 using Adobe Acrobat 5.0 to create PDF files. Lately people have been upgrading their Adobe Reader to the 7.0 version and now my PDF will not open for them. I have a library of PDF's created by 5.0 and now they are useless. Can anyo

  • Slideshows don't function on tablet versions?

    Is anyone having an issue with slideshows and drop down menus on tablet versions. I cannot get these to work. Home page: About and Services has a drop down that works perfectly on desktop version but no go on tablet. Slideshow toward bottom of page:

  • Status Bar in Mail 3?

    With looking at the photos of Mail 3 I don't see a status bar (at the bottom or elsewhere), has it been mentioned if the status bar will be added back?

  • Division cannot be carried out because divisor is zero - EA00

    hi, While doing EA00 transaction following error occurs: During billing simulation, a termination occurs with message AJ020 (Division cannot be carried out because divisor is zero) or AJ097 (Unexpected termination in variant &1 in schema &2) I gone t

  • ClassCastException while creating sendstream

    Hi, I'm trying to establish an unicast rtp session and play an url to the remote client. DataSource[] sources = new DataSource[urls.length];           for(int i = 0; i < urls.length; i++) {                sources[i] = Manager.createDataSource(urls);