What happened to processing an effect to end of view while in edit mode????

Back when Audition was Cool Edit Pro, they had an option while adding effects while in Edit Mode that would let you highlight a section of the waveform, add an effect say like an echo, then would allow to process that effect to the end of view. That was a beautiful thing.... Since Adobe took over, that has been missing. I can't believe I was the only one out there that used this option. It was a HUGE time saver!!! Say like I want to add an echo to only one word. I could highlight that word, add the echo, then have the word echo past the highlighted area until it faded completely, or reached the end of the view. Now, I have to highlight that word, cut and paste it into a new track, then go back into edit mode, extend silence to the end of the file, add the echo effect, go back to multitrack mode and then mixdown the 2 files. This is rediculous and time consuming. Am I missing that option somewhere or does it not exist?? Or maybe someone out there has a better way to do it??? Or better yet....ADD THAT OPTION BACK IN!!!!

yes definately this should be added back

Similar Messages

Processing effects to end of view while in edit mode is missing

Back when Audition was Cool Edit Pro, they had an option while adding effects while in Edit Mode that would let you highlight a section of the waveform, add an effect say like an echo, then would allow to process that effect to the end of view. That was a beautiful thing.... Since Adobe took over, that has been missing. I can't believe I was the only one out there that used this option. It was a HUGE time saver!!! Say like I want to add an echo to only one word. I could highlight that word, add the echo, then have the word echo past the highlighted area until it faded completely, or reached the end of the view. Now, I have to highlight that word, cut and paste it into a new track, then go back into edit mode, extend silence to the end of the file, add the echo effect, go back to multitrack mode and then mixdown the 2 files. This is rediculous and time consuming. Am I missing that option somewhere or does it not exist?? Or maybe someone out there has a better way to do it???

yes definately this should be added back

I have been trying to download ios8. I dont remember exactly what happened but at some point I ended up unplugging my phone from my computer because there was an error. Every since then it has not been turning on or responding to iTunes. When it d

I have been trying to download ios8. I dont remember exactly what happened but at some point I ended up unplugging my phone from my computer because there was an error. Every since then it has not been turning on or responding to iTunes.
When it does respond to iTunes it tells me that I have to restore my phone. I click restore and it says "Extracting Software". It gets all the way to the end and then says that there is an error; something about a disk being full?
I have no idea what is going on and I could really use some help.
Thanks.

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

While in Edit Mode in Moodle - page content does not render at all, but I am able to display the underlying HTML code. Happens only after upgrade to Firefox 11.0.

While in edit mode in the Moodle course management system, the Page Content window should display the page as it will appear to the user. If you click on the "Edit" button, you are able to view the HTML code for the page. However, when you return to the normal display mode, the page is blank. This has occurred after the upgrade to Firefox 11.0. Page is normally rendered in Internet Explorer.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.org/kb/Error+loading+web+sites

What happened to the sound effects in Garageband after in app purchase of $4.99 expansion pack?

I purchased a brand new MacBook Pro OS Mavericks and promptly began using Garageband 10.0.2. There were many sound effects provided in the program (thunder, galloping horses, etc.), and I decided to complete the in app purchase. Once I completed the download and install, I realized that I no longer had those sound effects. Does any one know what happened to them?

Galloping Horses and thunder are not part of the GarageBand sound effects. You have probably other loop packages installed, for example the Final Cut Pro Sound Effects or the iLife Sound Effects.
Check, how your Loop Browser is set. The pop-up menu at the top of the Loop Browser should be set to "Loops" to have all loops available. Set the "Scale" to any, clear the search field. In the GarageBand Preferences, "Loops" pane disable "Keyword Browsing", filter for more relevant results.
Now you should be able to see all installed loops. If not, use the command "Reindex all Loops" from the "Loops" pop-up menu.

What happens when the multiply effect is applied to both the object and the graphic within?

Hi everyone,
I could really use some help with this...
I'm getting a booklet ready to be printed. Originally, half of the pages were to be printed on paper with a (physical) colour. For budget reasons however, I've now decided to print the paper colour, and have the content of the pages overprinted on the tint in the background, which I've applied to the pages in the background of an additional master page.
When I set the objects to multiply, they blend with the background colour, which is the effect I'm looking for, as there would be no 'paper white' on the pages that I want to appear as though printed on coloured paper.
There's something confusing me though; you can also set the graphic within the object frame to multiply. This makes the graphic appear darker, which I don't really understand, since there is no extra colour within the graphic that accounts for this. I've looked at the output in the resulting pdf, and it looks like it's not just an on-screen effect, but the extra amount of (in this case) yellow would also be visible in the printed result.
Does anyone have an explanation for this? Please see the graphic for a visual example.
Thanks in advance, kind regards
Robbin

Hi.
          Yes. There is a heartbeat mechanism between all cluster members so they detect when a
          member has left the cluster. The primary server recognizes when it's secondary server
          has failed, and then proceeds to search for another member of the cluster to make as
          it's new secondary.
          Regards,
          Michael
          David Whitehouse wrote:
          > I'm trying to figure out what happens when the server holding the replicated state
          > for an object fails.
          > Does the server with the primary object (or the replica-aware stub) recognize
          > the failure and select a new
          > server to hold the replicated state?
          >
          > For instance, Assume I have a cluster defined with three servers - 1,2,3 - with
          > an instance of object A on server 1
          > and the replicated state ino on server 2. What happens if server 2 fails? Is the
          > state now replicated to server 3?
          >
          > Thanks, David
          Michael Young
          Developer Relations Engineer
          BEA Support

What happened to my after effects cs6 trial?

i had adobe after effects cs6 for some time but i deleteda problem but when i tried to reinstall it, i get ascreen thats says "join the community for (amount of money a month)"
and under it, it says license this product. i want to continue my trial but it is faded out on the bottom right corner. plz help

RamonZ your evaluation period has ended for After Effects. If you wish to keep evaluating the software title you will want to install it on a different computer.

What happens when your phones warranty is ended but now you need to go into apple to have it fixed or get a refirbished one?

okayy so my phones warranty ended december 19th, 2012 its currently december 31st and im noticing a few problems. For starters, my phone restarts sometimes out of nowhere for no reason. Also, ive noticed on the left side of my screen it looks like the left side of my front screen glass is slightly lifting... So now that my warranty is ended i dont know what to do or how much money it will be please help!

when I took my phone that was out of warranty to the apple store bc it would not power up they told me $150 and they was just going to give me a new phone instead of trying to fix it

What happens to iweb hosting when mobileme ends?

I cuurently host a website with iweb/mobileme... what will happen to hosting when mobileme switches off?

I opened an account with GoDaddy, and moved all my iDisk files to their "OnLineFileFolder" system. I also created space for iWeb hosting. With the help of their telephone support (which is excellent), I was able to re-publish all my iWeb sites to their system, and it works fine. From reading the other replies, there appears to be several solutions for iWeb hosting elsewhere.
Here is a sample of iWeb posted on GoDaddy:
http://www.garry-anderson.info/Garry_at_Home/About_Me.html
Best wishes, Garry.

What happens to Muse site when you end subscription to Creative Cloud?

What will happen if i leave Creative Cloud/ Muse? Does the site die? Will the client still have editing capabilities?

Hi Andrea,
If you have hosted the site on BC against the 5 free sites you get with cloud subscription, the site will expire once the cloud subscription has expired. If you have not hosted the site on BC or not against the free sites you get with cloud subscription, then nothing will happen to the site. It will be go as per its billing cycle.
Regards,
Aish

What happened to the special effects from the old iMovie (Smoke, Rain, etc.) It's not on the new version and I need/want it!

I remember older versions of iMovie having special video effects like smoke, lightning, and rain. Where are they hiding in the new version? If they are no longer included is there a download or work around? I need them for a school project I'm helping my 11 year old with.

Workaround? I did these effects on my iPhone and then imported to my Mac for editing. I have lightning, but no smoke or rain. I used an iPhone App called Action Movie.

What happened to MOTION 3D effect?

Hi, I have motion 3, and can't find the 3D effect anymore, does anyone know if it disappeared completely?
Thanks

I'm not too clear on your instructions (right click on the toolbar and then drag the "add camera" button??) but you don't need a camera in your project to have 3-D...Motion project in version 3.0.x are always 3D. In the Inspector if you open the properties for Position and Rotation you'll see x, y, and z for each of them (3D means you can rotate and move layers in 3D space). To layers interact with each other in 3D you'll need to make the groups containing them into 3D groups. One way to do that is to add a camera, but again it's not strictly necessary as it's easy to directly convert any group to a 3D group.

What happened to Nvidia 3D effects in kdemod4.3?

Recently I re-installed Arch using the 08/2009 iso onto my P4(no hyperthreading)/AsusP4S800DXmob/ GeForce6200 desktop with HannspreeHF237 monitor. The video card(8XAGP) and monitor were recent additions.
The prior 2mo old install updated until midAug. gave me the 3D effects. The new install following the new wiki and my old notes did not give me the 3D stuff. Ubu and MDK(mandriva) still did. But Ubu log files mentioned ACPI not found by nvidia after the last kernel update. So I checked the var/log for xorg and I noticed that nvidia could not find ACPI... so 3D desktop was changed to 2D.
Reading the recent posts about the nvidia driver(from extra) and my GeForce6200 having problems with 3D I said EEK! I've been hit by the Arch rolling release engine!
Could there be a problem with the new kernel's built-in ACPI that nvidia wasn't seeing the ACPI module it expects? So I installed ACPID and now the kernel was showing ACPI messages and hal loaded the acpid module. /var/log/Xorg.0.log shows nvidia now seeing ACPI and loading 3D. Just to be sure I ran nvidia-xconfig( since kernel was recently upgraded) and xorg logs showed same ACPI loading. Following the log messages that AGPFastWrite and PageFlip were not used and that Freetype module doesn't exist I commented those lines from /etc/X11/xorg.conf. And now nvidia loads dri and dri2! Go figure! ---Gotta go over the fonts wiki entries again...
So the conclusion to the tale is that yes the nvidia driver from extra(repo) works fine with my GeForce. And I must read read read those logs and make sure acpid is installed. Hope this experience helps:)

Should have mentioned that ( 8/24/09)kernel gave message that my bios doesn't support acpi or apm--which it does! And during boot ACPI wasn't mentioned. Don't recall ever having to install acpid in arch. Figured the kernel missed it so I installed acpid. xorg log now shows acpi present and 3D desktop didn't revert to 2D. And the boot sequence includes starting acpi.
Will wait until I get more experience with arch linux before trying aur, though I've used yaourt. More familiar with slackware. Thanx all:)

What happened to the default folder set (for your own libraries) in Edit/Preferences, in Adobe Photoshop CC?

Once again I come to my computer, and it's not the way I left it. While I love cloud, I think in some way, the concept of Customer Service i.e. Providing a Service to a Customer "Set Service, for a Set Price" has lost the value of "service"
I find it extremely disheartening, to always be dealing with changes Adobe makes, it costs me an exorbitant amount of time. I don't work with a team, so it's just me. And every other week, there is some changes, when my 3D quite working in CS6 I had no forewarning, just woke up one morning and "Poof" no more 3D, the software turned off the feature in my CS6, however, it did work in CC.
The things I find most disheartening
features quit working with NO PRIOR WARNING.
Plug-ins, libraries what, now have to be stored in the cloud in order for MY system to automatically see them?
Again No Default Libraries on our machines ( unless you think I'm going to store 2 Terabytes of libraries on the cloud and/or in my AppData Directory *not* Nothing but system/program files themselves go on my Primary drive, everything else is on external drives, this is a security issue and one I'm not about to change, nor should anyone have to change it, since it is a *best practices* standard.
I still can't access items in (for instance: Color Themes created on Kuler, are available on my computer, but not for me to put them into a library on the cloud. I have over 100 color themes there I have created, on my Creative Cloud account, why can they not be imported or drag/drop into the library designated for it. When I log into my Cloud Account on My iPad it is the same cloud account as on my PC, yet it doesn't even see my previously created color scheme's? Why? Does anyone have any ideas?
I use a font manager for Windows called High-Logic, a Font Manager, Creator and a Scanner for Hand Writing Fonts Great Program, I've had it for over a year, while there is no plugin for Photoshop there is for In-Design and for Photoshop, I use the Font Manager on my computer to activate the font I want and it shows up in the Character Tool Box automatically. Yet, just in the last week, every time I try and create something in Photoshop, I'm fine, until I go to use a font, at which time, my working project goes "dark" ( no longer visible) until I click on another tool in Photoshop.
I cannot keep having these issues, it's way too time consuming, it's exorbitantly time consumer attempting to get a response to questions in the forums (no one's fault, it's just the nature of the forums themselves)
The true cost of a product is not only in it's subscription based fee, but also includes the time it takes to keep up with product changes, additional training, the cost of delivery (cable connections/provider). So far since the first of the year I have logged over 100 hours to either 'fix something that quit working with no notice', time spent re-reading documentation seeking a solution, time spent perusing the forums for a solutions, or posting a question, time spent in additional training/books, etc."
While I understand I'm relatively new, as I had a 5 years off from working, I went from Macromedia Suite 8 to CS5.5 -full suite (heck-of a learning curve)
Yet, I cannot believe I am the only person having these issues, otherwise the forums wouldn't be so full.
I did try limiting the permissions to not allow Adobe to update the software automatically, however, the permissions I wrote, were in fact re-written by adobe's cloud synchronization, Which I did find disturbing on a few levels. None of which I'll go into, but it needed to be mentioned that *yes, I tried that too*.
*I ended up re-configuring my machine AGAIN* and deleting CS6 altogether, The performance change after I deleted CS6, was/is the difference and why I am still with my cloud membership.
**I have reconfigured my machine numerous times, to facilitate the cloud, I am on a PC, Adobe and Microsoft Development Environments do not play well together, I ended up removing them altogether and creating a vm for them and basically all my development work. And have twice since reconfigured it for various reasons.

Hi
One of the reasons that Edge fonts and web fonts are though to be preferable to the old font stacks was because of Android tablets/smartphones only having the Droid font family available, (Android 4.3 added the Roboto font family also).
This meant that Android device users defaulted to the 'Droid' font or a user installed font. The default font if the user had installed a custom font and set it as default, could be anything, (even a comic script font) thus possibly destroying your text and/or layout completely.
If you are not using an Edge font or a downloadable font do not forget to set the last three fonts in your font stack to -
'...., Roboto variant, Droid variant, default font'
PZ

What happened? I can no longer see property changes in the design mode/

I'm not sure what I did to make this change, but previously
when I use the property values as opposed to html code to make
changes, color, formatting, etc, it could be immediately viewed
without out going out to the browser.
I would view with browser and maybe make a few changes here
and there to html to finess, but primarily I could do all in the
design layout.
Now, even when I color text, it doesn't show until I preview
in browser. Changes in font size, color, etc, nothing can be seen
until I go to preview and save.
Can anyone tell me what change I made to cause this?
Thanks for your help in advance. Sharon

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"YBBD" <[email protected]> wrote in message
news:gnhkjh$7ap$[email protected]..
> I'm not sure what I did to make this change, but
previously when I use the
> property values as opposed to html code to make changes,
color,
> formatting,
> etc, it could be immediately viewed without out going
out to the browser.
>
> I would view with browser and maybe make a few changes
here and there to
> html
> to finess, but primarily I could do all in the design
layout.
>
> Now, even when I color text, it doesn't show until I
preview in browser.
> Changes in font size, color, etc, nothing can be seen
until I go to
> preview and
> save.
>
> Can anyone tell me what change I made to cause this?
>
> Thanks for your help in advance. Sharon
>

What happened to processing an effect to end of view while in edit mode????

Similar Messages

Maybe you are looking for