What happened to "REWIRE" with GB 10.0.1?

I'm using the latest version of Garageband 10.0.1. Was wondering what happened to the rewire function. I depend on it because I've arrangements that use Live 8lite with rewire.

Settings > General > Siri > Siri On.
To use Siri: Hold the home button for 3-5 seconds and speak to it.
About Siri...
http://support.apple.com/kb/HT4992

Similar Messages

RE: WHS 2011 what happens to it with the release of windows 10?

Hi
So i'm glade Microsoft has seen the light with windows 10 and brought back the start button, I haven't had time to watch the presentation only the highlights.
The question I have is what happens with Windows Home Server?
Windows 10 is supposedly going to be all thing to all people, but they said that about windows 8; i'm hoping the difference now is that they have learned from there mistakes; home server needs tweaks for sure, and if its part of the free update even better.
I think having a central data store for homes is a necessity especially where the internet isn't unlimited like it is in Africa

Home server 2011 will not change/upgrade to Server 10. It should allow for Win10 client to connect/be backed up though.
Grey

What happens if 3700 with WSSI module is connected to 802.3af PoE port?

I know that the 3700 itself will drop to 3x4 MIMO if it only gets 15.4W of power (takes 16.8 with 4x4). If I add in a WSSI module, I know that is not enough power to run the WSSI module. We'd like to deploy our APs with the module installed and light up WSSI only as we get 802.3at power available. What I don't know is if the AP will light up as 3x4 with WSSI disabled, or if the AP will just completely fail. I should get a chance to test this soon, but if you happen to know, please tell!
Thanks!
Gary Hahn

If you have enough power to the AP, you can look at the GUI and under the main screen under Access Point Summary, you will see Dual-Band Radios... the WSSI or WSM will show up there.
Please rate helpful post and Cisco Support Community will donate to Kiva
Scotty

What happened to X201 with i7-620M processor and X201s?

Been looking at the X201 with the i7-620M processor and the X201s.
Looking at lenovo's website today, seems like the X201 now only comes with the i5-540M processor and the X201s is no where to be found?
What's going on? Are these discontinued? Out of Stock? Or did Lenovo take them off the website while they revise the specs? I'm hoping they just took them off to upgrade the specs. If they come out with a X2xx with WXGA+(or better) screen and i7-620M processor(or better) I would definitely pick one up.

chairmansdad wrote:
Just got a news from a insider who knows about CPU demand market that now Lenovo manufactories are all lack of i7 and some i5 processors. Due to the recently, crazy large orders of processors that from ACER with Intel that makes smaller customers have to wait for couple weeks. ACER is one of biggest customers of Intel and they have priority.
http://www.electronista.com/articles/10/03/18/acer.other.majors.squeezing.intel.cpu.supply/
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

What Happened to AirPlay with iOS 8?

AIrPlay icon is missing on on iPad2 after upgrading to iOS 8. I have upgraded AppleTV to latest version and AirPlay works with iPhone 5 running iOS 8. Everything is connected to same Wi-Fi network. Is this a iOS 8 bug or is there some fix/work-around?

I had the same problem but only with my videos/movies (AirPlay button not there's), but got it to work with a work-around. What I did was open youtube (I did it with the PBS iPad app), which AirPlay worked, then hit pause on the program, then went to my videos, and click play and it hijacks the AirPlay and works.
LIsten Apple, this is #rottenApples, so please fix this. You really shouldn't screw with our entertainment.
GUruTracy

What Happened to QT with version 10?

I just got a new MacPro a week ago and the new version of QT has very diminished capabilities. I used to be able to import an image sequence and save it out as a QT movie, I used to be able to export a single frame, and I used to be able to export with many options as to codec, size, filter, etc. NONE of that is available with QT 10 or am i completely missing something?
Any ideas about this "dumbing down" of QT?
What are you people doing when you need to do these tasks?
Thanks for the help!
Bernard

Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded.
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".

What happened to thread with id 213613 ?

I have a watch on the 'cryptography' forum and received an email about thread
http://forums.oracle.com/forums/thread.jspa?forumID=964&threadID=2136135
but when I try to visit it I just get a message saying - The specified thread [2136135] was not found. forumID=964 IS the 'cryptography' forum but when I visit the 'cryptography' forum there is no trace of that thread.
The text of the email indicates that it is probably in the correct forum so I don't think it will have been moved by a moderator to another forum. I can't see it having been deleted by one of the moderators.
Is this just another bit of crapp exhibited by this forum software ?
Edited by: sabre150 on 26-Nov-2010 07:01
Interesting. When I look at user http://forums.oracle.com/forums/profile.jspa?userID=815944 he does not seem to have created any threads yet the email indicates that he is the author of the thread.
Can a non-moderator delete his own threads?

Not very comforting, but I tried to reference this topic using its shorthand link syntax (normally links to the topic without the forum id in the URL): as you can see it doesn't work; it looks like the thread has definitely been removed:
{thread:id=2136135}
Edited by: jduprez on Dec 3, 2010 12:29 PM
Note that your OP's title mentioned id 213613; this one doesn't exist either, but I'm certain it was a typo anyway:
{thread:id=213613}

What happens to iChat with the move to iCloud?

Just tried to activate iChat after a long absence and got the whole speal about the move to iCloud. Read through all the material but there was no mention of supporting or not supporting iChat after the move from MobileMe to iCloud.

Hi,
iChat still supports active MobileMe names as well as @mac.com names.
New iCloud (@me.com) names can only be used in iChat 6 (Lion)
@mac.com names work if they were paid for but have lapsed, were trial accounts or have been linked to MobileMe accounts at the MobileMe launch. (the last oif these gives your two valid AIM Screen Names)
Is that 10.5.2 still an accurate state of your current OS level ?
Some up to date details may help.
Waht type of name were you trying to use ?
Which version of the OS and which version of iChat (from iChat 3 onwards these need to "Match" in progress/updates).
10:32 PM Tuesday; November 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have not made any purchages 14th and 15th Apr 2012. But Apple Itunes Store had collected money from my Credid Card. How do I get the support to understand what happened.

I have not made any purchages 14th and 15th Apr 2012. But Apple Itunes Store had collected money from my Credid Card. How do I get the support to understand what happened.

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
 Cheers, Tom

What happens internally when Delta is Initialized?

Hi..All
Can any one plz explain What happens internally when Delta is Initialized?
And Can we Intialize delta, if delta load error flagged to INTIALIZE DELTA?
With Regards
Jonn

Hi John,
Delta Initialization sends all the historical data requested on the "selection screen" of the infopackage.
After the initialization, you can do the Delta loads for the same selection. After the first historical load,
delta loads bring in only the changes.
This is what happens internally.
With delta initialization, the system is preparing for an initial full load and later only the changes.
If your delta initialization failed. You can delete the initialization. In your infopackage, on the top left hand
corner, you will find Scheduler. Drop down the menu for Scheduler, Double click on "Initialization Options for
source system". Select your previous delta initialization and delete it. The delete button is the trash can at the bottom left hand corner.
This will delete your previous delta initialization. You can now initialize your delta again.
You can also refereto the below link for further information.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/content.htm
Hope the answer was helpful.
Regards,
S.P
*Assign points for Useful Answers*
Message was edited by: S.P
Message was edited by: S.P
Message was edited by: S.P

Help I just installed the latest update on my IPhone4 and now I can't open any of my stored podcasts. When I hit the podcast icon, the screen goes white for a second and the goes back to the opening page with all the icons. What happened?

Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?

Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.

I was surfing the net when my computer started emitting double beeps. I shut it down with no problem but I can't find any info on double beeps that did not occur at startup (haven't tried starting it back up yet though). What happened?

Quite the trial to sign in to freaking Apple support. I apparently made an account with my primary e-mail, but damned if I can recover the password, apparently I don't know my own birthday. So I had to make a new account with another e-mail, and even when I thought it was done, no, I had to fill out more information before I could get to this screen. You won't let me ask for tech support from your message board without my mailing address? Then my completely inoccuous user name was rejected for containing banned words. Lemurs and cats are profane now, what? This is why I hate computers.
Anyway, I've got Mac OS X 4.something, can't check because it is shut down, and I already described my problem in the subject there before I got dragged back into account creation. I searched several places for answers but all I can find are discussions about double beeping at startup (even when excluding the word "startup" from search results), while my double beeping started all of a sudden when the computer was in use. The beeps were certainly less than a minute apart. What happened? What do I need to do about it? Is it safe to start the computer up again? Fortunately my files are pretty much all backed up.

I don't know if we are experiencing the same problem, but this is what I did and it seemed to work for me so far.
Before anything I had to hard restart my laptop. hold power button until off then turn back on.
In Finder click on Go, then click Go to Folder. in the dialogue box type
/var/db/crls
In that folder there are two files that you need to move to the trash
crlcache.db
ocspcache.db
You will need to type in your password to move these to the trash.
Restart your computer and then Empty the Trash. It is very important that you empty the trash afterwards. I forgot to do this the first time and I had to restart the whole process. It has been a few days and I have been without any problems.
I am not claiming this process to be my own, I found it on another discussion thread and it worked for me. I don't have a link to it because I had to use someone else's computer and had no luck trying to find it again. This is the procedure I followed, I do remember it well and I wrote down the steps because I had to do it twice and got tired of combing through all of the websites I have searched looking for a fix to my problem. Hopefully this helps, and try it at your own risk of course.
Let me know if you try it and it works or not, good luck.

I updated iOS 7 and my contacts were ok then they suddenly disappeared a few weeks after updating. I have no idea if it has anything to do with iOS 7 but when I email someone the contacts are there. When I open the app they are gone. What happened?

I updated iOS 7 and my contacts were ok then they suddenly disappeared a few weeks after updating. I have no idea if it has anything to do with iOS 7 but when I email someone the contacts are there. When I open the app they are gone. What happened?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

What happens to the data in apps that you choose not to backup with iCloud?

Hi,
I have a 64b iPad and a lot of the storage is used up with data stored inside apps. Some of these data stores are 10s of GB in size. Such as, I keep some videos on my iPad that I play with VLC player. When I upgraded the iPad to iOS5 and activated iCloud backup, it immediately told me there wasn't enough room to back up my iPad entirely. I turned off backing up certain apps, such as VLC.
What happens to these apps? Are they still backed up during regular syncs with your Mac?

when you plug into itunes you can backup to both locations (icloud and locally) just not a the same time. When you click on your phone in itunes you'll see this option
click icloud then sync (will backup to icloud when you sync)
afterwords
click back to this computer and sync
keep in mind that if icloud has a 5GB backup limite unless you upgrade it
10GB — $20/year
25GB — $40/year
50GB — $100/year
edit: forgot to say
if you don't sync with itunes to the computer then whatever doesn't go to icloud is not backed up at all.

What happens if i boot with windows an install a new version of windows on mac book pro ?

I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
the main questions are :
1. does it recognize any of my partition to select for windows installation ?
2. if no , can i format any partition for new partition during windows installation?
3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?

majid khalili wrote:
I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
Give your previous partition layout, you cannot install Windows via Bootcamp, unless you are willing to give up all your extra partitions and go back to EFI, OS X and RecoveryHD only configuration.
i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
the main questions are :
1. does it recognize any of my partition to select for windows installation ?
2. if no , can i format any partition for new partition during windows installation?
3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?
1. Windows installer will not work and you will end up with driver issues.
2. No.
3. You cannot, but if you could, the Apple Bootmanager would be your Boot Manager/Loader.

What happened to "REWIRE" with GB 10.0.1?

Similar Messages

Maybe you are looking for