What happened to the Get/Set Date and Time utilities from RT 7.1?

I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites  call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

Similar Messages

  • How do I change the "Set Date and Time Automatically" server

    Is there a way to change System Preferences/Date & Time/Date & Time/Set date and time automatically from "Apple Americas/U.S. (time.apple.com)" to another time server instead?

    sig wrote:
    The menu has a drop down. But if you know the address of another time server I would think you can type it in.
    Yeah, that's not really a menu, but a "combo box", which is a combination of an edit field and pop-up menu. So you can choose from existing items or just type in whatever time server you want.
    charlie

  • Is there a way to force time can only be set to "Set date and time automatically"?

    I am using OS X 10.9 .5 , and here is what I want to do.
    When you click "Open Date & Time Preference", you will find an option that states "Set date and time automatically". And of course you can chose not to do that, and adjust the time.
    But can you remove that option? So your OS X is forced to chose the mode "Set date and time automatically" no matter what you do? (aka you can't adjust the time by yourself now.)
    Is that possible? Is there an app that can achieve this goal or can you do that at Terminal?
    Thanks in advance.

    There's a similar setting in iPhoto preferences (in iLife '08 versions and later), or in Image Capture preferences (if you're using iLife '06 or earlier). Check those settings as well.

  • I get the message  on Apple TV "setting date and time"

    I get the message  on Apple TV "setting date and time", but seems to be stuck in that action. When I check, network settings, everything seems OK.  Any suggestions?

    This will normally happen if you continually turn the AppleTV off at the wall (happens each time you turn it on). If its stuck on that, just turn it completely off, then see if it gets stuck on that again. If it keeps getting stuck (as in for more than 5 minutes) on it, plug it into your computer and attempt to update the AppleTV. You may need to restore it if the software is already up to date or it's still not working after the update.

  • Cannot get pass the "Setting date and time" screen

    Hi, I am faced with a very serious problem... someone please help!
    I bought home an Apple TV (2nd generation) for my parent overseas, but when I switched on - it got stuck on "Setting date and time" screen and cannot continue. Pressing "menu" button (or hold on for many seconds) does not work at all! I am stuck in that screen. Restart the Apple TV does not helped.
    I thought it is the issue of the remote control (maybe "menu" key has failed), so I bought another one (the aluminum model) and the same issue persists! I tested the remote control on Mac (boot up and press menu key, using Better Touch Tool... both shows the menu key is working).
    What shall I do? Thanks!

    is it connected to the internet either wired or wirelessly

  • Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

    Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

    also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

  • I am getting a message "setting date and time...." but nothing happens

    My Apple TV has stopped working. I start up and it says "setting date and time...." but I cannot access the internet.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Why is the screen from my Apple TV doesn't go past setting date and time and the screen stays black

    My Apple TV screen turns on black and stays on setting date and time a few seconds after that it stays black but on light is still on and nothing else happens,I can't get it to do anything else!I just moved and have a new router and I think that might be the reason but I don't know! Please help!!!!

    I have the same issue and seeking an answer...
    I have already reset my ATV3 to factory defaults twice and connected it directly to the router, but the problem remains the same... BTW, I connected it to the two routers of two different networks I have at home... It reacts the same to both nw....
    Any ideas?

  • HT1595 My AppleTV seems to be stuck on the "Setting Date and Time" load page

    I just moved from a house to an apartment and when I hooked up my appleTV it said "Setting date and time" with a spinning load wheel and it's been doing this for a long time now. I hit MENU on the remote and tried going to Settings> General> Network like it said at the bottom of the screen, but nothing happened. It's connected to the right WiFi network, but the only icons it shows on the home screen are the 'Computers' icon (for Home Sharing) and the 'Settings' icon. My movies, music, tv shows, netflix etc. icons aren't showing up. I restarted it and got as far as the "Setting date and time" load page again, where it just sits and loads.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • What happened to the 'get all' podcast option?

    what happened to the 'get all' podcast option?

    It's disappeared!
    I don't mean to be flippant, but I couldn't think of a more appropriate opening response.
    I've had this happen to me in the past, and it has just re-occurred with the latest iTunes update. The solution is to download iTunes again (don't remove or delete your existing iTunes) and then start the installation procedure. One of the two options you see should be a Repair option. Use that and all will be well again.
    Your post prompted me to repair my iTunes (for just that reason) and while it was running, I noticed a very brief message about "Get Podcast", in other words,it was the repair being applied. The procedure only took a few minutes and I didn't need to close other programmes or re-start my computer.
    By the way, I like your user ID, are you intending that your first born becomes ;adxcjghvldxkjfghbv ll?   
    Message was edited by: the fiend

  • Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

    Subject:
    Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

    Settings>General>International.
    Set the calendar to "Gregorian". You have it set to Buddhist.

  • TS4268 I changed set date and time automatically to "no" and I was able to activate iMessage. This seems contrary to all the troubleshooting discussions I've been reading.

    Is there any definitive info on this subject?

    When ATV is setting date and time, and hangs there, it usually indicate there isn't a network connection.  Is your router still working, is the Internet for all the other computers on the same network working?  Have you tried changing from WiFi connection to Ethernet or vice versa?

  • I need to get the Current System Date and time in the format

    I need to get the Current System Date and time in the format
    *6/24/2009 11:30:29 AM*
    How do i do it ?

    I seem to be saying this a lot lately.
    Google is your friend.
    I googled "java current date format" and SimpleDateFormat featured prominently in the results.

  • Can I get the Requisition Submitted Date and Time in Emails

    Can I get the Requisition Submitted Date and Time in Emails
    Hi,
    Is there a way to get Requisition submitted Date and Time in Service Initiation Emails.

    Unfotunately, there is not a namespace that will return Submitted Date for a requisition or service. You can, however, get the start date:
    #Requisition.StartedDate# or #Service.Requisition.StartedDate#

  • The apple tv is stocked at setting date and time

    I Updated the Apple TV and now it requested to start the configuratio all over again and is stocked at setting date and time, can somebody help me?

    http://appletv2.com/stuck-on-setting-date-and-time-fix/

Maybe you are looking for

  • Getting Error:::oracle.jbo.domain.Date cannot be cast to java.lang.String

    Hi Friends, I have simple req'. i have one date filed in OAF page...if user has change the date filed..means if he incresed by 2 days..then i need to call one procedure..if not no need to call.... first am picking that date field to by uusing prepare

  • Mappings with custom input parameter.

    We are using PL/SQL wrappers to execute all the OWB 10G (10.1.0.4) mappings. How do we call a mapping in the wrapper which has a input mapping parameter.? We use the sql exec template in a procedure.

  • Hotspot via bluetooth

    Hotspot via Bluetooth is the only way to connect to it without having to activate the hotspot. in wifi hotspot mode are problems to connect and then only helps on and off the hotspot function. so I use bluetooth because I then once with my ipad mini

  • Some objects didn't come from dump file

    Al salamo 3likom ,, Hi guys.. this is the first question here in this forum and I will appreciate your answers when I made import dump file to my database via impdp command I found some objects didn't come like triggers, some function and procedures,

  • Movie Won't Download from iTunes on iPad

    I recently purchased two movies from iTunes using a gift card I got for Christmas. I started the download and once the first movie got too about 3.2 GB of 6.2' it stopped and started over for no apparent reason. I tried multiple times to download bot