What happened to the "Group Gripper" in CC 2014?

This thing in the upper right hand corner of grouped panels used to let you move all the tabs at once time. It was super helpful for redocking a group of panels in a floating window into another window. Now if you want to dock the panels again you have to move each tab individually. There isn't a "Dock Grouped Panels" option in the menu drop down on the individual tabs and I can't seem to find something that functions similarly to the group gripper. It's still mentioned in the AE Help Workspace page.
This isn't a problem specific to one computer either. My computer at home (Window 8.1), at work (OSX Mountain Lion), as well as a local studio (Windows 8) I've been freelancing all don't have it.
Is this a bug with the recent UI reskin? Or is this a purposeful change? I hope it isn't because it really eats up my time when I have 5 panels that need to be moved at once.

Thanks for the quick response. What was the reason behind removing it? And is there any ETA on when it'll return?

Similar Messages

What happened to the Grouping field in Get Info?

I asked this question before and was referred to a specialist on the phone that solved the problem by telling me to click on "Add Field" and "Always show current fields." Grouping was there and was editable. All worked well ...
Until today. Now, clicking on "Always show current fields" results in nothing. So what happened between 11/13/2014, when I last downloaded books and was able to get Grouping, and today, 11/25/2014, when I no longer can?
Grouping is essential to my ordering of Book series. FYI, I use iTunes mostly for Audiobooks of which I have about 700, which is why Grouping is essential to my sorting of series.
HELP!!!!!

Thank you so much. That works just fine. However, I also just discovered something. Evidently, at least some of the fields in list view are editable. By adding Grouping to the columns shown and clicking on the empty field, I was actually able to type whatever I needed into the field.
I have not yet tried it with other fields, but will do so to see if it works for all fields in the list view.
Laura

I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone I need to enable. Thanks.

Question
I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone and I think I need to enable. I can't log on to Citibank to pay my bills using Firefox or Safari for that matter. Citibank says cookies must be enabled to access their on-line bank. I wonder if this is the problem...cookies that is?

Yes, I found the cookies, and thanks for taking the time to help out. I called Citibank. They told me that they will not support Firefox or Safari for Mac because our user group is too small for them and the expense too high. The person that I spoke to said in the past, Firefox has worked with Citi, but that was just by accident. At the moment they have no plans to help Mac people using the latest OS log onto their website or enable programs like my Quicken or Mint.com to access. They don't work anymore either. I think all the problems happened after the last OS update.

What happens to the outputs when I reconfigure the 6524 card?

I have an application where I want to recongure the card throughout my program. For example I might initially want to set a single 8 bit port, so I could use Dig_Prt_Config and Dig_Out_Prt. Then I might want to output a batch of data using buffered IO so I use DIG_Block_PG_Config and DIG_Grp_Config to configure the card again. My question is what happens to the output states when I do this. If the port is then assigned to a group what happens to the outputs at that point? Do they remain unchanged until I do a Dig_Block_Out or do they all turn off? I guess I will find out when I try it, but it would save me from throwing away code if I knew now,
Thanks,
David

David,
I assume you have the 6534 board. On the 6534 board, reconfiguring the port will not affect the output value. Well, as long as the direction map doesn't change. Anyway, hope that helps.
Ron

ISE - What happens when the on-boarded certificate expires?

I'm trying to design a good BYOD deployment model but have a few questions that need direct answers. I have down how to go about on-boarding and getting a certificate on a device, the ISE provides great flow for this to happen in many ways. My questions come from a design perspective before and after the BYOD deployment is completed.
1. Figuring out a method to validate the device is a Corporate asset or a BYOD asset.
     (I don't want to install a certificate on just any device, or perhaps I do but I need to give permissions to all resources if its a Corporate Device, and more resitrictions if it's BYOD, so how do I figure this out during the provisioning phase?)
     a. Use MDM (May not have one, or if you do we are still waiting on ISE 1.2 for that integration)
     b. Build a Group for provisioning admins, if user PEAP-MSCHAPv2 account is from this group install a certificate. (issue here is that the end user looses administration of the device in the my device portal as the device is now registered to the provisioning admin)
     c. Pre-populate MAC into ISE as all Corporate devices should be provisioned by I.T. before they go to the end user (I think this is good but can see push back from customers as they don't want to add more time to the process)
     d. Certs on any IOS or Android device, provide access based on user group and do not worry if device is Company asset or not (I believe that this is the easiest solution and seems to be what I find in the guides)
     e. Other options I have not thought about, would love input from the crowd
2. What happens to the device once the Certificate expires?
     (I don't know the answer to this, my thought would be the user or device will fail during the authentication policy and this creates a mess)
     a. Tell the user to delete the profile so they can start all over again (creates help desk calls and frustrated users)
     b. Use MDM for Cert management (may not have one)
     c. Perhaps the client uses SCEP to renew based on the cert template renew policy and there are no issues (this is me wishing)
Would appreciate some feed back and would like to know if anyone has run into these issues.

Neno,
Sorry but I don't have any other info on using a public CA, Cisco says to use internal CA's for PKI. I think the best practice in 1.2 comes out will be to use one interface for Web Management and a different interface for Radius, profiling, posture, and on boarding. This way you can use your private CA for EAP and a public CA for web traffic. Have you tried a public CA bound to management and a private CA for EAP yet?
I did do a session on EAP-TEAP, they explained how it will work and also discussed EAP-FASTv2. EAP-FASTv2 is available now but you must use anyconnect as your supplicant. Microsoft and all other vendors will have EAP-TEAP native once it is fully released and comissioned as it will be the new gold standard for EAP. It will support TLS, MD5, and CHAPv2. If you are interested I have the PDF of the presentation I attended that shows the flow of how EAP-TEAP will work. This is much better than wasMachineAuthenticated and machine auth caching, which has many down falls.
I currently do machine and user auth I just don't require them. If Machine auth then allow machine on vlan-x with access to AD, DNS, and blah blah. Then a seperate rule to say user auth gets more access, although I require EAP-TLS for both and if you think about it you are accomplishing the same thing if your PKI is setup correctly. Make it so users and machines can only auto enroll, that way you know the only way they got their cert was from GPO policy. I won't go into anymore detail, but there is lots you can do.

VDI3: what happens when the Primary VDI core fails?

A potential customer asked me this and I did not really know how to answer the question ... sorry if this was asked before. So here we go:
What happens when and if the Primary VDI core fails? Will the entire VDI3 setup go down? Will running sessions be lost? And how do you fix that?
I found this page:
http://wikis.sun.com/display/VDI3/MySQL+Cluster+Reconfiguration+Scenarios
So I assume the "Non-VDI host ==> Primary Management Host" scenario is what would need to be done?
http://wikis.sun.com/display/VDI3/MySQL+Cluster+Reconfiguration+Scenarios#MySQLClusterReconfigurationScenarios-NonVdiToPrimary
If this is correct then this would answer the "how do you fix that?" part. OK then.
But still I'd welcome if anyone could explain what exactly would happen when and if a Primary VDI core fails. The customer's opinion on this is that they are a "single point of failure" because the Primary VDI host is not redundant (as opposed to the 2 x Secondary VDI cores) ... So, is this assumption correct or not?
Thanks in advance.

Hi,
Assuming you have 3 VDI core hosts. One of them is the primary. And the primary goes down. So what happens then:
* The underlying database is still running on the remaining hosts
* All desktop sessions are still running on the remaining hosts
* New session requests will be handled by the remaining hosts.
* All desktops are still running on the virtualization hosts.
So in essence, your VDI cluster is still healthy. The operation is just impacted in this way:
* You can't add new VDI core hosts
* You can't change the configuration of the Sun Ray server failover group
* A failure of another VDI core host (data node) will result into a complete outage of the underlying database
You should bring up the primary again as soon as possible in order to gain failover capabilities again.
-Dirk

What happens to the open item in bsid table when it is cleared

hi experts,
i have a doubt about open and cleared items of accounting documents. as we know open items of customers are stored in bsid and cleared ones in bsad. For suupose, an open item is closed ina particular period then what happened to the entry in bsid and bsad table. an entry regarding is stored in bsad (cleared),and what happens to the entry in bsid, still it will be there or removed from it.

Hi,
When ever we clear the document(Complete payment) that document will be moved to BSAD table. Other wise it will remain in BSID.
If u are making partial payment then all the partial payment documents along with original document will be stored in BSID till u made the complete payment for that invoice.
Assumption is u have to give all partial payment documents made for particular invoice item while u are making complete payment in F-28 transaction. So that these partail payment documents will also be cleared while making complete payment and moved to BSAD table.
This trasaction can be used for both partial and complete payments.
Irrespective of complete or partial payments made all the documents will remain stored in BKPF and BSEG tables.
BSID and BSAD are index tables to address performance issues with BKPF and BSEG tables.
So all open and cleared documents will be there in BKPF and BSEG tables.
All cleared documents will be there in BSAD table.
Alll open documents will be there in BSID table.
Hope it is clear.
Thanks,
Vinod.

What happens to the mail in my iMac after I delete it from my iPhone? Will it be deleted from my computer as well?

What happens to the mail in my iMac after I delete it from my iPhone? Will it be deleted from my computer as well?

If they are both using the same iCloud ID (assuming you are running your mail from iCloud), then yes, the email will disappear from your Mac after you delete it from your phone and after your phone sycs with iCloud and your Mac syncs with iCloud.
I use a windows phone, but it works the same.

Just upgraded to 5 from 3 - what happened to the page select icon? Can't find it in customize toolbars.

Used to be you could select which page you wished to go back or forward to from the arrow icons on the navigation toolbar. The history menu item only shows 10 sites without having to open history for today. What happened? Is there another icon or a new plug in for this functionality? I used it all the time.

''what happened to the page select icon (Back/Forward)''
The back/forward buttons have been moved to right-hand side of the navigation bar and the drop-down was removed. User right-click or hold click for one second to see the tab history. This is item #5 in my list.
The History menu also has "Open Previous session" and "Open closed windows",
to see more history use the History sidebar ("Ctrl+H") or the History Library List ("Ctrl+Shift+H") and sort or view by "Last visited".
You can make '''Firefox 5.0.1''' look like Firefox 3.6.19, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 5.0.1, or 4.0.1, look like 3.6.*)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

E4X: What happens to the root element?

I'm working with XML using the E4X notation. I'm used to the "old school" XML APIs that use DOM and I'm a bit confused.
For example, let's consider the following XML
<mx:XML id="myXML" >
<top>
    <sub1 id="uno">
      <sub2>hello</sub2>
      <sub3>world</sub3>
    </sub1>
    <sub1 id="duo">
      <sub2>ok</sub2>
      <sub3>ko</sub3>
    </sub1>
</top>
</mx:XML>
In my code I use the following traces. This is done with the De MonsterDebugger, but all others should work the same way. I have casted the traces to String only to make it easier to ask this question (no need post images)
MonsterDebugger.trace(this, "myXML:" + myXML);
MonsterDebugger.trace(this, "myXML.sub1: " + myXML.sub1);
MonsterDebugger.trace(this, "myXML.sub1.sub2: " + myXML.sub1.sub2);
What I get as output is
(String) = myXML:<top>
<sub1 id="uno">
    <sub2>hello</sub2>
    <sub3>world</sub3>
</sub1>
<sub1 id="duo">
    <sub2>ok</sub2>
    <sub3>ko</sub3>
</sub1>
</top>
(String) = myXML.sub1: <sub1 id="uno">
<sub2>hello</sub2>
<sub3>world</sub3>
</sub1>
<sub1 id="duo">
<sub2>ok</sub2>
<sub3>ko</sub3>
</sub1>
(String) = myXML.sub1.sub2: <sub2>hello</sub2>
<sub2>ok</sub2>
All is fine above and this was a bit long abstract for my question. The question is what happens to the root element, in this case <top>? I was trying to access the data with the following notation
myXML.top.sub1; // etc
I spent quite a lot of time trying to get it to work, until I discovered that the root element is not used. Can anyone explain this?
Or, I guess the simple explanation is that the root node is ignored and the sub nodes are created as properties of the object. The question also could be stated as: Why isn't this documented in the Flex API Reference?
Thanks.
P.S. I found this article on common E4X pitfalls which also has other interesting topics when working with E4X.

its gone
downgrading would kill the phone..

What happens to the original photo after editing? Does it get replaced by the edited photo?

I just bought my first iPhone(5). On Android, when editing a photo, the original stays in your gallery and the edited photo gets placed right next to it. So what I want to know is, When editing a photo in the photo app, what happens to the original since it would be nice to be able to make different edits of it.

That is an excellent question. This is definitely not the programmed behavior of Photoshop Elements. Normally, when you edit a file, a new copy of the file is created (the original is simply left alone). This new copy of the file will have "_edited-1" added to the end of the name. It should definitely not be adding $ to the name at all.
Just as a test, create a new user account on your computer, and try editing another image to see if does the same thing there. However, I suspect there is another application on your computer that is modifying how files are saved, deleted, and renamed.

What happens to the while loop iteration counter if it runs unchecked?

I want to use the iteration counter to initialise a value on the first loop of a while statement. ie i = 0, x = 100. Fine. The application I am building will be left to run for weeks or months on end without stopping (hopefully :¬)). What happens to the iteration counter in this situation? Does it reset to 0 or what? I don't want it reinitialising any values while the loop is running other than when it starts.
I set up a while loop to try to figure out what happens and the iteration counter stops at 2147483648 which is 2^31 - 1.
Any help would be appreciated,
Thanks,
Niel.

It might be something you already looked at, but perhaps it's an option to perform the initialization outside (before) the while loop. That way it will be initialized correctly only once, no matter what the iteration counter does.
Of course if you need the counter for other purposes than initialization you might have the same problem...
Note that a lot of the timer functions also overflow after a certain time (I believe 24 or 48 days?) so be careful running very long loops (but you already knew that probably).

TS2972 I just updated all of our computers to itunes 11 and now when we try to use our home sharing, we can't import songs. What happened to the easily located "import song" feature? I wish now that I wouldn't have updated to the new itunes 11.

I recently updated all of the computers in the house to itunes 11. Now when we try to import songs from homesharing, we are unable to. What happened to the conveniently located "import song" button on the old version of itunes. Please help an old mother out please!

diesel vdub, i use 11.1.1
solved the issue today. first sync with itunes, so all the stiff you bought on the mobile will be backuped.
1. uncheck sync music in itunes and sync. all the music will be erased from mobile device
2. check music player on the mobile device. just the unwanted songs will still be there
3. go on the iphone to settings, general, usage, music player. there is just a few mb from the remaining unwanted songs. swipeleft and erase the content. switch iphone off and on again
4. repeat step 2. there will be no data. otherwise repeat step 3
5. check sync music in itunes and sync. all the music will be back again but not the unwanted songs.

What happened to the "closed tabs" list in 4.0 RC2?

What happened to the "closed tabs" list in 4.0 RC2?
In prior versions of Firefox, I could open a list of closed tabs, but I can't find the button now.

Hi g,
Many features have been lost in Numbers 3. You can send feedback to Apple with Menu > Numbers > Provide Numbers Feedback.
And... playing the Devil's Advocate, have a look here:
Features that Apple has promised to reinstate:
http://support.apple.com/kb/HT6049
Hints on workarounds here:
https://discussions.apple.com/message/23622372#23622372
What has been GAINED in Numbers 3 is here:
https://discussions.apple.com/thread/5473882?start=75&tstart=0
What has been lost in Numbers 3 is here (with corrections where Apple has already reinstated some lost features in the Numbers 3.0.1 update):
https://discussions.apple.com/thread/5470448?start=240&tstart=0
I enjoy running both versions of Numbers (Numbers 2 and Numbers 3) at the same time. They each have strengths and weaknesses.
Numbers 3 did not replace your Numbers 2 (Numbers '09). Look in a folder called iWork '09 inside your Applications folder. And enjoy.
Regards,
Ian.

What happened to the nifty "sync" button in iTunes? It syncs as soon as I plug it in, and that's great! BUT! When I go to the iTunes Store and buy new stuff, I can't just 'sync' the device again so my new stuff gets added. Why?

What happened to the nifty "sync" button in iTunes? It syncs as soon as I plug it in, and that's great! BUT! When I go to the iTunes Store and buy new stuff, I can't just 'sync' the device again so my new stuff gets added. Why?

Nothing happened to it.
It is still there. Maybe it says apply now, not sure, but it is still there.

What happened to the "Group Gripper" in CC 2014?

Similar Messages

Maybe you are looking for