What happened to the scrubber in Premiere CS6

One of my favorite tools in the source and program monitors in previous versions was the scrubbing tool. I don't see it in CS6. Any ideas ? TY Gene

Unfortunately Adobe got rid of some convenient tools that previous versions had, one of them is the scrubber, the other the left and right arrows in the timeline.
For the scrubber you have a replacement that is not as evident as the old one, but if you put the pointer over the timecode in the timeline panel, press the mouse left button and move to either left or right, it has the same function the scrubber had, and it's nice because it moves as fast as you move your hand, so you can move frame by frame or go really fast. In addition, if you want to go even faster, you can press shift while using it. The timecode in the Program panel works the same way, but unfortunately the one in the source panel stops when the mouse pointer (which goes invisible when you start scrubbing in any panel) reaches the edge of the screen. That doesn't happen in the other two timecodes. So the removal of the scrubbing wheel is not a terrible problem, since there is a replacement, but they should make it more evident, without having to read the whole manual. I found it one day by pure chance.
As for the removal of the arrows in the timeline panel, it's baffling why they did that. While you can move along the sequence with the slider like any other NLE, when you are zoomed in to where each second of footage is roughly half an inch of screen space, if you grab that slider and move it in either direction it flies, it doesn't detect too well the speed of your hand like moving the timecode does, so you end up several seconds ahead or before. Removing those arrows has to be one of the most idiotic things they've done, because if you didn't use them, then you still wouldn't use them, but many people did use them and now they don't have them anymore. It's even more baffling when you see that they improved it in many areas.

Similar Messages

  • What happened to the plug-ins in CS6? Can you move them from CS5 to CS6?

    Have they been renamed and placed in another folder/area? Or am I asking the obvious?

    You SHOULD NOT move plug-ins from any Photoshop install to another Photoshop install unless you know what you are doing!
    You should run the plug-in installer so it can do the right thing. If your plug-in installer cannot "see" Photoshop CS6 then contact the developer of the plug-in so they can create a new installer for you.
    If your plug-in is using Extension Manager make sure you run the correct version of Extension Manager for the suite app you are trying to install into. Extension Manager CS6 for Photoshop CS6 for example. You can right click or control click on the extension and pick the Extension Manager to launch.
    WARNING: Most of the time, users who try to manually copy, end up with not only a plug-in that will not work but a broken Photoshop that will not launch! You are better off working with the plug-in manufacturer.

  • What happened to the Extract Filter in CS6?

    I tried the Content aware option and all it did was shrink the image layer down.

    These are the optional plugins for photoshop cs5 windows:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4688
    For photoshop cs6 windows:
    http://helpx.adobe.com/photoshop/kb/plug-ins-photoshop-cs61.html

  • What happened to the hand drag sliders in CS6?

    What happened to the hand drag sliders in CS6? You know when you would create an adjustment layer and then you could hover below the sliders and just start dragging either way? And you could option+double click and reset the value to 0. Is this functionality still in CS6?

    There is no place I get  a "Hand" when near sliders in an adjustment layer, though I can click on the sliders themselves and drag them.
    Conroy, can you do a screen grab of what you're describing?  Perhaps I'm not looking at the same thing you are.
    -Noel

  • What happens to plug-ins for Premiere Pro when upgrading from CS6 Production Premium to CC?

    If I upgrade from CS 6 Production Premium to CCloud, what happens to the plug-ins currently installed in Premiere Pro? Will I lose them (some Red Giant, Synthetic Aperture and such)?

    Not only that, there was an internal code change when going from CC to CC2014
    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
    -so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
    If you are sure you don't need the old CC programs
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
    -read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

  • What happened to Camera Raw in Bridge CS6

    What is going on with Adobe? What happened to the Camera Raw features in Bridge CS6? It was working perfectly fine in previous versions.
    Working on a MAC, first sign, when I go in the AdobeBridge CS 6 drop down menu, select Camera Raw Preferences... nothing happens. Then, selecting any JPEG, right-click, no option to open in Camera Raw like before.
    Should I install something to have this activate? Am I missing a piece? We just bought 10 version of hte Creative suite and we rely on Bridge a lot to work our photos, specially Camera Raw...
    Any clue, someone?

    This from another post.  Hope this works.
    CAMERA RAW (ACR):
    To get to ACR: 
                File>open (Mac) or  open as (windows) and  pick file. Change format at bottom to Camera Raw from selection list
                File>browse in Bridge,  right click or hold ctrl and click on tiff or jpg and select open in camera raw
    There are also preferences you can choose under "file compatibility" to prefer ACR for supported RAW files

  • What happened to the T4i? Seems like it was here then gone...didn't seem to last very long.

    What happened to the T4i? Seems like it was here then gone...didn't seem to last very long. Did it have major problems?

    "How do you like your 7D?"
    Westy,
    In my opinion the 7D is the 'best buy' in a professional level DSLR out there. The pro level featuers are many and the downsides are few.
    If you couple the Canon 7D with the Sigma APO 50-150mm f/2.8 II EX DC HSM, you truly do have a fantastic set-up at the most value considered, reasonable, price.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • What happens after the year of subscription?

    I'm thinking about getting the student version of CC. My question now is, what happens after the year of subscription? Will I get any software that is able to open or even alter the my files? Someone told me that I'll get a copy of CS6. Is that correct?

    fullcorn wrote:
    what happens after the year of subscription? Will I get any software that is able to open or even alter the my files? Someone told me that I'll get a copy of CS6. Is that correct?
    No, not correct.
    When you cancel your subscription, or allow it to expire, your subscription software will stop working until you re-start your membership and start paying the monthly fee again.
    You pay, you use. Stop paying, software stops working.

  • What happens to the open item in bsid table when it is cleared

    hi experts,
                   i have a doubt about open and cleared items of accounting documents. as we know open items of customers are stored in bsid and cleared ones in bsad. For suupose, an open item is closed ina particular period then what happened to the entry in bsid and bsad table. an entry regarding is stored in bsad (cleared),and what happens to the entry in bsid, still it will be there or removed from it.

    Hi,
    When ever we clear the document(Complete payment) that document will be moved to BSAD table. Other wise it will remain in BSID.
    If u are making partial payment then all the partial payment documents along with original document will be stored in BSID till u made the complete payment for that invoice.
    Assumption is u have to give all partial payment documents made for particular invoice item while u are making complete payment in F-28 transaction. So that these partail payment documents will also be cleared while making complete payment and moved to BSAD table.
    This trasaction can be used for both partial and complete payments.
    Irrespective of complete or partial payments made all the documents will remain stored in BKPF and BSEG tables.
    BSID and BSAD are index tables to address performance issues with BKPF and BSEG tables.
    So all open and cleared documents will be there in BKPF and BSEG tables.
    All cleared documents will be there in BSAD table.
    Alll open documents will be there in BSID table.
    Hope it is clear.
    Thanks,
    Vinod.

  • What happens to the mail in my iMac after I delete it from my iPhone? Will it be deleted from my computer as well?

    What happens to the mail in my iMac after I delete it from my iPhone? Will it be deleted from my computer as well?

    If they are both using the same iCloud ID (assuming you are running your mail from iCloud), then yes, the email will disappear from your Mac after you delete it from your phone and after your phone sycs with iCloud and your Mac syncs with iCloud.
    I use a windows phone, but it works the same.

  • Just upgraded to 5 from 3 - what happened to the page select icon? Can't find it in customize toolbars.

    Used to be you could select which page you wished to go back or forward to from the arrow icons on the navigation toolbar. The history menu item only shows 10 sites without having to open history for today. What happened? Is there another icon or a new plug in for this functionality? I used it all the time.

    ''what happened to the page select icon (Back/Forward)''
    The back/forward buttons have been moved to right-hand side of the navigation bar and the drop-down was removed. User right-click or hold click for one second to see the tab history. This is item #5 in my list.
    The History menu also has "Open Previous session" and "Open closed windows",
    to see more history use the History sidebar ("Ctrl+H") or the History Library List ("Ctrl+Shift+H") and sort or view by "Last visited".
    You can make '''Firefox 5.0.1''' look like Firefox 3.6.19, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 5.0.1, or 4.0.1, look like 3.6.*)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • E4X: What happens to the root element?

    I'm working with XML using the E4X notation. I'm used to the "old school" XML APIs that use DOM and I'm a bit confused.
    For example, let's consider the following XML
    <mx:XML id="myXML" >
      <top>
        <sub1 id="uno">
          <sub2>hello</sub2>
          <sub3>world</sub3>
        </sub1>
        <sub1 id="duo">
          <sub2>ok</sub2>
          <sub3>ko</sub3>
        </sub1>
      </top>
    </mx:XML>
    In my code I use the following traces. This is done with the De MonsterDebugger, but all others should work the same way. I have casted the traces to String only to make it easier to ask this question (no need post images)
    MonsterDebugger.trace(this, "myXML:" + myXML);
    MonsterDebugger.trace(this, "myXML.sub1: " + myXML.sub1);
    MonsterDebugger.trace(this, "myXML.sub1.sub2: " + myXML.sub1.sub2);
    What I get as output is
    (String) = myXML:<top>
      <sub1 id="uno">
        <sub2>hello</sub2>
        <sub3>world</sub3>
      </sub1>
      <sub1 id="duo">
        <sub2>ok</sub2>
        <sub3>ko</sub3>
      </sub1>
    </top>
    (String) = myXML.sub1: <sub1 id="uno">
      <sub2>hello</sub2>
      <sub3>world</sub3>
    </sub1>
    <sub1 id="duo">
      <sub2>ok</sub2>
      <sub3>ko</sub3>
    </sub1>
    (String) = myXML.sub1.sub2: <sub2>hello</sub2>
    <sub2>ok</sub2>
    All is fine above and this was a bit long abstract for my question. The question is what happens to the root element, in this case <top>? I was trying to access the data with the following notation
    myXML.top.sub1; // etc
    I spent quite a lot of time trying to get it to work, until I discovered that the root element is not used. Can anyone explain this?
    Or, I guess the simple explanation is that the root node is ignored and the sub nodes are created as properties of the object. The question also could be stated as: Why isn't this documented in the Flex API Reference?
    Thanks.
    P.S. I found this article on common E4X pitfalls which also has other interesting topics when working with E4X.

    its gone
    downgrading would kill the phone..

  • What happens to the original photo after editing?  Does it get replaced by the edited photo?

    I just bought my first iPhone(5).  On Android, when editing a photo, the original stays in your gallery and the edited photo gets placed right next to it.  So what I want to know is, When editing a photo in the photo app, what happens to the original since it would be nice to be able to make different edits of it.

    That is an excellent question. This is definitely not the programmed behavior of Photoshop Elements. Normally, when you edit a file, a new copy of the file is created (the original is simply left alone). This new copy of the file will have "_edited-1" added to the end of the name. It should definitely not be adding $ to the name at all.
    Just as a test, create a new user account on your computer, and try editing another image to see if does the same thing there. However, I suspect there is another application on your computer that is modifying how files are saved, deleted, and renamed.

  • What happens to the while loop iteration counter if it runs unchecked?

    I want to use the iteration counter to initialise a value on the first loop of a while statement. ie i = 0, x = 100. Fine. The application I am building will be left to run for weeks or months on end without stopping (hopefully :¬)). What happens to the iteration counter in this situation? Does it reset to 0 or what? I don't want it reinitialising any values while the loop is running other than when it starts.
    I set up a while loop to try to figure out what happens and the iteration counter stops at 2147483648 which is 2^31 - 1.
    Any help would be appreciated,
    Thanks,
    Niel.

    It might be something you already looked at, but perhaps it's an option to perform the initialization outside (before) the while loop. That way it will be initialized correctly only once, no matter what the iteration counter does.
    Of course if you need the counter for other purposes than initialization you might have the same problem...
    Note that a lot of the timer functions also overflow after a certain time (I believe 24 or 48 days?) so be careful running very long loops (but you already knew that probably).

  • TS2972 I just updated all of our computers to itunes 11 and now when we try to use our home sharing, we can't import songs.  What happened to the easily located "import song" feature?  I wish now that I wouldn't have updated to the new itunes 11.

    I recently updated all of the computers in the house to itunes 11.  Now when we try to import songs from homesharing, we are unable to.  What happened to the conveniently located "import song" button on the old version of itunes.  Please help an old mother out please!

    diesel vdub, i use 11.1.1
    solved the issue today. first sync with itunes, so all the stiff you bought on the mobile will be backuped.
    1. uncheck sync music in itunes and sync. all the music will be erased from mobile device
    2. check music player on the mobile device. just the unwanted songs will still be there
    3. go on the iphone to settings, general, usage, music player. there is just a few mb from the remaining unwanted songs. swipeleft and erase the content. switch iphone off and on again
    4. repeat step 2. there will be no data. otherwise repeat step 3
    5. check sync music in itunes and sync. all the music will be back again but not the unwanted songs.

Maybe you are looking for