What happened to useful workflow conditions?

I'm jumping from 2007 workflows to 2013 and finding a lot of things I can't do that I used to be able to. I would have thought workflows options would have expanded not shrunk. what has happened to the condition item "begins with" or
"contains" or "is empty" ?
Also, how do I make link two conditions with and AND operator.? If This AND That?
There are no mistakes; every result tells you something of value about what you are trying to accomplish.

Hi,
According to your post, my understanding is that you wanted to know what happened to useful workflow conditions.
There are features that are deprecated in or removed from SharePoint Designer 2013. Features that are deprecated are included in the SharePoint 2013 release for compatibility with previous product versions but will be removed from future
versions.
There are also the capabilities and features that are new to workflows in SharePoint 2013.
For more information, you can refer to:
What's changed in SharePoint Designer 2013
What's new in workflows for SharePoint 2013
In addition, you can also use And operator in the condition.
You can add a condition, and then click the condition and add another condition.
You can create workflow as below:
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Similar Messages

What is the use of Condition is Query Designer ??

What is the use of Condition in Query Designer ??
How to use condition in Query Designer ??

Hi,
Conditions in a query can be defined for both characteristic combinations and key figures.
Characteristic combinations can be used using the ranking list functionality (e.g Top N or Last N customers with highest sales).
Key figures can be assigned the value limit conditions ( for e.g. display only rows in the query for which the key figure > 10 ).
For your specific requirements in which you need to display only a limited set based on the key figures, then you can go for conditions.
The conditions can be allowed to work on all the drill down characteristics independently, single characteristics or combination as well based on your requirement.
While execution the report, you can activate or deactivate the condition anytime by right clicking on the data cells.
Regards,
VA

I can no longer download and save files. They are now saved with a ".part" suffix that I can not use or open. What happened, I used to do this all the time?

Downloads seem to be happening normally at first but the file shows up with a file extension of ".part" that I can not use or open. If I refresh the folder where it was downloaded to, it disappears as though it wasn't there at all.
I used to do this and it just yesterday started to give me problems. It doesn't seem to matter what file type I do this with as PDF, MP3 and EXE files have all shown this problem.
Please help!

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See also "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

What happened when using non-TX datasource connection in a Transaction?

Hi,
I try to update a timestamp table in a transactional EJB method invocation.
The table is in the same db where the entity bean stores. I get the
connection via DataSource (non-transactional), and issue the sql statement,
and then close the connection.
My question is: is my update part of the EJB transaction? If yes, how do
I manage to get the timestamp update out of the scope of the transaction
since I just want to timestamp no matter wether the EJB transactional method
invokcation succeed or fails. Do I need to explicitly suspend and resume
the transaction?
Thanks!
-Chunbo

Chunbo Huang wrote:
>
Hi,
I try to update a timestamp table in a transactional EJB method invocation.
The table is in the same db where the entity bean stores. I get the
connection via DataSource (non-transactional), and issue the sql statement,
and then close the connection.
My question is: is my update part of the EJB transaction? If yes, how do
I manage to get the timestamp update out of the scope of the transaction
since I just want to timestamp no matter wether the EJB transactional method
invokcation succeed or fails. Do I need to explicitly suspend and resume
the transaction?Hi. Your update is non-transactional. It is not part of the EJB transaction,
and will succeed or fail at the time you do it, regardless of the eventual
fate of the EJB transaction.
Joe
>
Thanks!
-Chunbo

HT204074 Cannot access iTunes from iPad any longer? Not sure what happened?

Cannot access iTunes from iPad...not sure what happen. Used to work fine

You are right- they got to let us know that status or something. Here I am already to sit down and relax with a nice episode of Dexter and cannot access anything. it was fine this morning and now its annoying.

What is the difference using start condition and check function module

what is the difference between using start condition and check function module

That's new to me, I thought a start condition was evaluated before the workflow started, and thus now workflow work item is available. That's why I think the only situation in which start conditions/check functions can't be used, is when the availability of a workflow log for investigation of exactly what stopped the workflow is a requirement.
I suppose the <a href="http://help.sap.com/saphelp_46c/helpdata/en/4c/86bf43feca11d2a64f0060087a79ea/frameset.htm">SAP documentation</a> is in need of an update.

I'm using the great Firefox 5.o. What happened to the "Bookmark All Tabs" feature that used to be found under Bookmarks? I love Mozilla Firefox!!!! :-)

I've looked under the Bookmarks heading as well as History. What happened to the extremely useful "Bookmark All Tabs". Loved that feature of Firefox. Thank you!!!!!!

Right-click '''on''' a Tab to see that menu item or use {Ctrl + Shft + D}.
In conjunction with the new Firefox button in Firefox 4.0 and with the addition of some new features that added a number of new menu items, many of the older menu items were moved around or only appear under certain conditions. It can be a bit confusing until you get used to the changes, but beyond adding new menu items in the future for new features, I don't think there will be major changes like that for awhile.

What happens u0093Updateu0094 command is used without where clause ?

Hi
What happens Update command is used without where clause ?
thank you

Hi subash,
chk this help
UPDATE dbtab SET f1 ... fn. or
UPDATE (dbtabname) SET f1 ... fn.
Extras:
1. ... WHERE condition
2. ... CLIENT SPECIFIED
3. ... CONNECTION con
Effect
Updates values in a database table. <b>If there is no WHERE clause, all lines (in the current client) are updated.</b> If a WHERE condition is specified, only thoserecords which satisfy the WHERE condition are updated.

By publishing this workflow, conditions and actions inside Impersonation steps will run using your credentials

In a SharePoint 2010 workflow that accesses a custom list, I am getting the following warning message before I publish the workflow to the SharePoint test server:
"By publishing this workflow, conditions, and actions inside impersonation steps will run with your credentials".
The only step in this SharePoint 2010 workflow is the impersonate step.
Thus would you tell me what I can do to have the workflow run under different credentials?

Hi,
As the warning says, any actions within Impersonation step would be carried out under your credentials if you published the workflow. If you intended to just add a Step in the workflow, then use different icon that says Step (with down arrow). Impersonation
step is used to modify the permissions on the item.
Once you have this, the workflow will be executing under the credentials of whoever starts it. Hope it helps.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?

I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

What happen if i use controll break statement in between select & endselect

Hi all,
what happen if i use controll break statement in between select & endselect ?
Thanks in Advance
KR

Hi for reference u can go through this code example
data:
fs_tab like sflight.
data:
   t_tab like standard table of fs_tab.
   select * from sflight into table t_tab.
   loop at t_tab into fs_tab.
     write: / fs_tab-carrid.
   endloop.
   refresh t_tab.
   clear fs_tab.
   select * from sflight into fs_tab.
     at new fs_tab-carrid.
       append fs_tab to t_tab.
     endat.
   endselect.

When using Iphoto to import photo from existing folder, what happens if I delete the photo in Iphoto ? Will the original file in the folder be deleted too?

When using Iphoto to import photo from existing folder to iphoto, what happens if:
1. I delete that photo in iphoto? will the original file in the folder be deleted too ?
2. when importing, does the hard disk store 2 versions of the photo, hence occupying additional space in the harddisk?

1 - no -- iPhoto only manages fiel within the iPhoto library - it does not ever do anything with files outside the library
2 - No idea what you are asking - by default (and strongly recommended) iPhoto copies the original to the iPhoto library and you delete the source file outside the iPhoto library - iPhoto alwasy has at least two versions of every photo and some times three - it always have the original, a thumbnail and once a photo is modified a preview - this is not optional - if it is not what you want then iPhoto is not the correct progrtam to be using for phopto management
LN

When I open iPhoto its asks me what photo library I want to use. I already have a photo library that i've been using for 2 years, where did it go? and why am I being asked now to choose a library or "create new" what happened to all my photos?

When I open iPhoto it asks me to choose a photo library. I already have a libary with photos and events in it that I've been using for 2 years. Where did it go? What happened to all my photos

We have no way of knowing what goes on on your machine. All we can tell is that your iPhoto library is missing and iPhoto can't find it. If you can't find then I the only thing you can do is restore from your Back Up.
Regards
TD

What is the use of specifying an "End Date" when certifying conditionally?

Hi,
When certifying conditionally, it is possible to specify an "End Date".
* What does OIM do with this End Date?
* What happens on specified date?
* Will the entitlement be automatically removed at that date?
Note : Screen view for help.
The steps are:
1. Start any certification
2. Log in as the certifier
3. Open the certification task
4. Now you can certify any item "conditionally" and enter an end date (see screenshots 1, 2 and 3).
http://docs.oracle.com/cd/E40329_01/admin.1112/e27149/managecert.htm#OMADM5063
http://docs.oracle.com/cd/E40329_01/user.1112/e27151/usingcert.htm#OMUSG3891

I had the same thought
wilnesse dericer

What happened to useful workflow conditions?

Similar Messages

Maybe you are looking for