What happened to user/group preferences in lion server?

I am installing Lion server and using am using the new server admin tools. The user/groups function is very different than Leopard/Snow Leopard. Many of the parameters are missing. We use the group preferences to restrict access to printers. That function seems to be missing.

jimshaughn
The print service has been eliminated from Lion so the old familiar way is gone.
However if you set up the Profile Manager service and then go to the management website of your server linked in the Server application, I believe you will be able to limit printers to specific users and groups. I have not implemented it yet, but I do remember seeing those options in there when I began looking at it. The difficulty with the Profile Manager is that it appears to require that the clients be 10.7. The new abilities in Profile Manager are actually pretty nice and seem easier to configure than WGM / Server Admin in my cursory review of the settings and options.
I am moving servers first so for me this is a bit of a challenge for me too since our clients are still 10.6. I had to bring computers and groups into the OD via WGM which will still cover the old machines. Control is split until all clients are up to date which is a little frustrating.
Have you set up the printers on the server itself and then edited the users/groups from WGM on the server itself which may allow you to still add the printers attached directly? It appears that you can still do that.
Hope this helps.
-Erich

Similar Messages

To use the "Users & Groups" preferences pane, System Preferences must quit and reopen.

When I try to access some of the system preferences in Mavericks I get an error pane that states "To use the “Users & Groups” preferences pane, System Preferences must quit and reopen."
Has anybody had this problem and if so what is the fix?

Usually happens if you opened one that was 32-bit. Then, you need to revert back to 64-bit.

Could not load Users & Groups preference pane.

Hi,
After upgrading to Lion from 10.6 i got this message. Preferences pane : Could not load Users & Groups preference pane.
I am unable to create accounts and access them.
I reinstalled the lion from the apple store again, and I cannot create, delete, or access the account setup.
Any help is appreciated.
thanks,
Francisco

I am still getting the same message :
Preferences error :
Could not load Users & Groups preference pane.
Every time i try to go to accounts I get that message.
Something is not allowing me to add accounts...
drwxr-xr-x 3 root wheel 102 Aug 4 21:11 Accounts.prefPane
drwxr-xr-x 3 root wheel 102 Jul 14 14:29 Appearance.prefPane
drwxr-xr-x 3 root wheel 102 Aug 25 19:52 Bluetooth.prefPane
drwxr-xr-x 3 root wheel 102 May 25 21:36 DateAndTime.prefPane
drwxr-xr-x 3 root wheel 102 Aug 1 19:22 DesktopScreenEffectsPref.prefPane
drwxr-xr-x 3 root wheel 102 May 25 17:58 DigiHubDiscs.prefPane
drwxr-xr-x 3 root wheel 102 May 27 20:42 Displays.prefPane
drwxr-xr-x 3 root wheel 102 May 25 16:28 Dock.prefPane
drwxr-xr-x 3 root wheel 102 Jul 21 16:03 EnergySaver.prefPane
drwxr-xr-x 3 root wheel 102 Jul 25 18:46 Expose.prefPane
drwxr-xr-x 3 root wheel 102 May 25 17:51 FibreChannel.prefPane
drwxr-xr-x 3 root wheel 102 Aug 2 23:38 Ink.prefPane
drwxr-xr-x 3 root wheel 102 Sep 23 20:57 InternetAccounts.prefPane
drwxr-xr-x 3 root wheel 102 Jul 25 18:50 Keyboard.prefPane
drwxr-xr-x 3 root wheel 102 Aug 1 15:58 Localization.prefPane
drwxr-xr-x 3 root wheel 102 Sep 13 22:46 MobileMe.prefPane
drwxr-xr-x 3 root wheel 102 Jul 25 18:51 Mouse.prefPane
drwxr-xr-x 3 root wheel 102 Aug 11 19:46 Network.prefPane
drwxr-xr-x 3 root wheel 102 Sep 13 22:15 ParentalControls.prefPane
lrwxr-xr-x 1 root wheel 21 Nov 9 23:03 PrintAndFax.prefPane -> PrintAndScan.prefPane
drwxr-xr-x 3 root wheel 102 Jul 21 16:14 PrintAndScan.prefPane
drwxr-xr-x 3 root wheel 102 Aug 23 21:20 Profiles.prefPane
drwxr-xr-x 3 root wheel 102 Aug 23 21:18 Security.prefPane
drwxr-xr-x 3 root wheel 102 Jul 25 18:47 SharingPref.prefPane
drwxr-xr-x 3 root wheel 102 Aug 20 14:47 SoftwareUpdate.prefPane
drwxr-xr-x 3 root wheel 102 Jun 1 22:27 Sound.prefPane
drwxr-xr-x 3 root wheel 102 Jul 31 17:15 Speech.prefPane
drwxr-xr-x 3 root wheel 102 Jul 17 14:33 Spotlight.prefPane
drwxr-xr-x 3 root wheel 102 Jun 20 17:54 StartupDisk.prefPane
drwxr-xr-x 3 root wheel 102 Jul 26 22:47 TimeMachine.prefPane
drwxr-xr-x 3 root wheel 102 Jul 25 18:51 Trackpad.prefPane
drwxr-xr-x 3 root wheel 102 Aug 16 18:07 UniversalAccessPref.prefPane
drwxr-xr-x 3 root wheel 102 Jul 12 16:42 Xsan.prefPane
drwxr-xr-x 3 root wheel 102 Sep 20 22:21 iCloudPref.prefPane
This is what i am getting.
THanks.

Users&groups preferences pane wants to open in 32-bit mode

Crazy isn't it? The users&groups preferences pane says: "To use the "Users & Groups" preferences pane, System Preferences must quit and reopen (like with 32-bit pps). when I click ok, it says: "Preferences Error, Could not load Users & Groups preferences pane."

I had to reinstall Lion, just running the installer again, not a clean install and the problem was gone. Just give it a try (hopefully) nothing to lose...

Can't open Users & Groups preference pane?

I am only user on my MBA. I was going to add wife as another user, but each time I try open User and Groups in System Preferences I get:
Preference Error
Could not load Users & Groups preference pane.
I found this post on the same issue. I also recently upgraded to Mountain Lion from Snow Leopard. I tried to follow the suggestion to open via Terminal app by entering /System/Library/PreferencePanes/Accounts.prefPane, but only got response that it is a directory.
Armando

1. You have a corrupt user picture.
2. Read this whole message before doing anything. If you're not sure you understand it, STOP. Get someone with more experience to help you; e.g., by making a "Genius" appointment at an Apple Store.
3. Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now. If you don't have backups, or you don't know how to restore from them without being able to log in, STOP.
4. Triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
5. In the Directory Utility window, click the lock icon and authenticate. Select the Directory Editor tool in the toolbar. Select Users from the Viewing menu in the toolbar, if not already selected. Select your user account in the list. On the right is a list of properties and values. Select the property "JPEGPhoto" and delete it by clicking the minus-sign icondirectly below the property list. There are two such icons in the window. You want the one on the right, not the one on the left.
CAUTION: Do not click the minus-sign icon on the left, below the user list.
Then click the Save button in the lower right corner of the window. Quit Directory Utility.
6. Try again to open Users & Groups. If it still doesn't work, repeat the above steps with any other users you created. You'll need to reset the user pictures. Don't use the same ones.
7. Besides the users you created, there are many other items in the user list, representing built-in accounts. Don't change those accounts.
8. CAUTION: There is no "undo" in Directory Utility. If you make a mistake and delete something in the Directory Editor that should not have been deleted, restore your whole system from a backup and start over. I have no other help to offer in that case.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

What happens if i need to reinstall Lion from a disc after my iMac ***** itself?

What happens if i need to reinstall Lion from a disc after my iMac sh**'s itself?

It depends on how bad your iMac sh**'s itself. If you can boot into the Recovery partition, then there is re-install option which will automatically download Lion from the store and install it. If you can't boot into recovery then you would have needed to create a bootable Lion dvd or thumb drive to do an install. In this case you would need to create the bootable image after downloading the Lion installer and before performing the install as the installer gets deleted upon successful upgrade to Lion.

System preferences in lion server not responding

My System Preferences iin Lion Server are not responding.
when I try to open any application in the system preferences panel, it never opens
How can I fix this?

Boot with your bootable backup/clone and restore it. If you don't have one, boot with your install disc and restore your Time Machine backup from some point in the past before the problem cropped up. Don't have one of those either? Then, boot with the install disc and reinstall Snow Leopard. That should restore all functionality without mucking with anything else. Then, run Software Update to get to something other than the 10.6 that your profile is showing, namely 10.6.4, the latest version, repair permissions, and restart.

I have a Mac Pro using Lion, with a SSD for system. Restored drive from backup. Now logon password doesn't work. Account password still works. Changing password in user group preferences no longer works to change logon password.

I have a Mac Pro using Lion, with SSD for system drive. Drive stopped booting, but otherwise appeared healthy. Restored from system backup. Now drive seems to work properly, BUT my logon password no longer works. Password OK for account; can access system preferences, and change user password there BUT logon still refuses to accept password. No luck changing password for that account after adding new administrator account and logging on from that account. Suggestions? Thanks.

If you redirect Accounts to another location (not on the Boot Drive) you need to direct them back there again after a restore.
SystemPreferences > Accounts/User&Groups > ...
... Unlock the lock, then hold down Control as you click on an Account to get access to the Advanced Options pane.

What happened to user restrictions on apps/sys prefs etc?

What happened to the user restrictions on system preferences and applications/utilities etc controls you used to have in the user account set-ups? (In Panther I think?) You used to be able to easily restrict a user to only certain applications and limited system preferences?
I can't seem to find it in Tiger (i'm running 10.4.8)? Have they changed this? I see you can have a admin, standard or modirated user - but this ability to restrict apps etc was essential for my machines.
Has it gone or am I just not looking in the right place?!

hi,
system preferences,
account,
select account,
parental control,
select system & finder
set your apps restrict preferences.
restrict user can't be an admin.

HT4798 How do I gain access to Users & Groups preferences when I cannot even log in.

I only have one apple ID linked and I cannot reset my password via the pop up box and cannot access the user groups as I cannot even log in.
Can anyone help.
Thanks
Matt

Reset Password
OS X 10.6 Snow Leopard
Follow the instructions in second and third boxes.
Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
I don't remember my original (former) account password
https://support.apple.com/kb/HT1631

What happen to User Interface Development under JDeveloper 9.0.3

Does anyone know what happen to the user interface development environment that was there under ver 9.0.2 but seems to be missing on ver 9.0.3

Are you talking about Swing graphical development?
If you are just right click on the Java file and choose the visual editor.

What happened to the Grouping field in Get Info?

I asked this question before and was referred to a specialist on the phone that solved the problem by telling me to click on "Add Field" and "Always show current fields." Grouping was there and was editable. All worked well ...
Until today. Now, clicking on "Always show current fields" results in nothing. So what happened between 11/13/2014, when I last downloaded books and was able to get Grouping, and today, 11/25/2014, when I no longer can?
Grouping is essential to my ordering of Book series. FYI, I use iTunes mostly for Audiobooks of which I have about 700, which is why Grouping is essential to my sorting of series.
HELP!!!!!

Thank you so much. That works just fine. However, I also just discovered something. Evidently, at least some of the fields in list view are editable. By adding Grouping to the columns shown and clicking on the empty field, I was actually able to type whatever I needed into the field.
I have not yet tried it with other fields, but will do so to see if it works for all fields in the list view.
Laura

What happens when I upgrade to mountain lion from snow leopard?

I currently have 2 partitions. my mac side and my windows 7 home side.
If i upgrade to mountain lion from snow leopard will i be expected to reinstall bootcamp and windows7 home along with all my other windows programs?
What happens to the partitions? do they stay the same or does the upgrade pretty much do a factory restore and make me start from square one again?
I have a time capsule. but do not really know how to work it like its supposed to. i just really use it to store data that i do not need on my partitions at the current times.

I do not have any knowledge about boorcamp but on my old MacBook with snowleapard,
I was not able to upgrade to Mountain Lion Because of my hardware I think.
And about tha bootcamp partition:
there shouldn't be any problem with upgrading "if even possible" because the Mac partition
can't edit the Windows partition.
I hope this helps you, but I would do some more research befor upgrading instead of completely trusting on my advise.

Sharing only users cannot connect to Lion Server

Dear all,
I stumbled across a funny problem, that I tried to resolve all day. I just wanted to add a sharing only user for my girlfriends new MacBook that she could use to connect to a shared Time Machine Volume.
If I add a new standard user, this user can connect to my server via finder (connect as...) and see the shared drives. If the same user tries to connect to the Time Machine Backup Volume via the settings dialog, it receives an error message (OSStatus-error 5).
If I add a sharing only user, this user cannot connect via finder or Time Machine (same error). The clients console states the following error message:
/System/Library/CoreServices/NetAuthAgent.app/Contents/MacOS/NetAuthAgent[2471] AFP error -5018 mapped to EIO
Does anybody have an Idea?

That is my point. Yes, Apple still lets you add users via users and groups in system preferences but that is not how you should be adding users. I've seen nothing but trouble when that option is used to add users and I believe that the Lion server docs say to not use that. If you are using lion server why not use it the way it was meant to be. Just create a account in OD and only give her access to the Time Machine Service and none of the others.

How do you change the volume used for group folders in Lion Server?

So I'm slowly acclimating to Lion Server, however, I'm not able to determine how to specify the parent folder for Groups. By default it's the /Groups root directory on the boot volume however I'm trying to change it to an alternate drive on a separate volume. I've tried removing the sharepoint from the 'Server' admin utility and adding the alternate Group folder (on a separate volume) but to no avail.
Has anyone else worked with this?

Hey,
Open Workgroup Manager app, from the ServerAdminTools, (link) enter your domain name for your server (FQDN), enter your OpenDirectory administrator user and password, go to Groups > Groups Folder.
Hope this helps.

What happened to user/group preferences in lion server?

Similar Messages

Maybe you are looking for