What happened to X201 with i7-620M processor and X201s?

Been looking at the X201 with the i7-620M processor and the X201s.
Looking at lenovo's website today, seems like the X201 now only comes with the i5-540M processor and the X201s is no where to be found?
What's going on? Are these discontinued? Out of Stock? Or did Lenovo take them off the website while they revise the specs? I'm hoping they just took them off to upgrade the specs. If they come out with a X2xx with WXGA+(or better) screen and i7-620M processor(or better) I would definitely pick one up.

chairmansdad wrote:
Just got a news from a insider who knows about CPU demand market that now Lenovo manufactories are all lack of i7 and some i5 processors. Due to the recently, crazy large orders of processors that from ACER with Intel that makes smaller customers have to wait for couple weeks. ACER is one of biggest customers of Intel and they have priority.
http://www.electronista.com/articles/10/03/18/acer.other.majors.squeezing.intel.cpu.supply/
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

TS3694 What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

What happens when the iPhone needs an activation and it doesn't respond? Then it asks me to restore it but due to an unknown error (-1) the iPhone can't be restored.

Thank you for your response. However, I have done that plenty of times and each time I try to restore my phone, it extracts the software and then when it says restoring with the loading bar, an error message comes up saying an unknown error has occurred.

Since i updated my iphone to ios7, i can no longer download applications and also cannot update my apps. what happened? there is an alert popping and it tells that i should switch to Philippine store.

since i updated my iphone to ios7, i can no longer download applications and also cannot update my apps. what happened? there is an alert popping and it tells that i should switch to Philippine store.

Hi, sallymaesmag.
Thank you for visiting Apple Support Communities.
If you are in the Philippines, check to see if the country is changed in the iTunes Store settings on the iOS device. These steps will show you how to change the preference.
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. TapSettings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Once you make the change attempt to download applications again.
Jason H.

Can I transfer docs between a MacBook with a Intel processor and a iMac with a PowerPC processor by using a usb cord?

Can I transfer docs/folders between a MacBook with a Intel processor and a iMAC with a PowerPC processor using a usb cord? Or by loading from the MacBook to a external drive and then to the Imac.

You need to use an external drive, FireWire cable, Ethernet cable, or wireless connection.
(73713)

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?

Thanks for the reply,. I went to the site provided and executed the directions but this did not solve the issue.
Even more details:
If I send a message to the Jane Doe address from another account on this machine (all my family uses the same email services provider and each have accounts set up on this machine), when you open it, it shows Jane Doe then the <applejax.xx> address AND the picture associated with the Apple Jax account.
So the problem shows up when the message is sent to this account from this machine, AND when it is sent from this machine from this account. No other accounts on the machine are effected.
I have sent and received email messages from the mail service provider's website, and everything is fine.

What is going on with CBS Channel 2 and 502

What is going on with CBS Channel 2 and 502? The audio went out mid-day. When it came back the picture is now a postage stamp? I called and was told Verizon is having trouble with CBS. It is now 9 hours latter and the picture is still a postge stamp? (5.1 AC3 digital )
Any fix soon?
Thanks

You didn't identify where you are. Channel 502 (WCBS in NY) was fine when I checked in VHO 5.
Also did you try a STB In-home-agent fix, set top box auto correct?

What's going on with the iTunes Store and the App Store this AM?

What's Going on with the iTunes Store and the App Store this morning? 3/11/2015

As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
https://www.apple.com/support/systemstatus/
Edit

What's going on with safari on ipad and iphone not connecting?

What's going on with safari on ipad and iphone not connecting?

I am using safari on my iPad to respond here. What problems are you having? Do you have a good wifi connection? Try a reset, hold the power button and home button until you see the apple then let go.

What happened when my ipod doesnt turn on and its just the apple sign on the screen ?

What happened when i pluged up my ipod and only the apple sign comes up on it , what is going on ?

Have you tried a hard reset yet to see if that does any good? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. Try this more than once if necessary.
Otherwise, try connecting it to your iTunes library in Recovery Mode and restoring it. See this article for instructions on getting your iPod into Recovery mode.
http://support.apple.com/kb/ht1808
B-rock

What is the Difference with FMLE 3.1 and 3.2? having problems with my stream

What is the difference with FMLE 3.1 and 3.2?
I am having major problems with my live stream, i am currently using FMLE 3.1 and using a Imac computer.
The stream seems to be delayed by 20mins and keeps on crashing
I have a 2MB upload speed and frame rate 25.00 and bit rate 800 kbps fromat VP6
Can anyone help me with getting the settings right and what is the best computer to use to allow FMLE not to crash and stream to run smooth?
Please Help
Thank you

Hello!
I would be interested in helping you with your question. You are going to need to provide a little more information about your current configuration in order for me to better understand your issue. Until then, I'll do my best to answer your quesitons.
There are subtle changes from 3.1 to 3.2. Both are stable releases. With your setup, you should be using 3.2.
Issues with FMLE typically deal with your capture card. The issues you are having sound like a streaming server issue. Stream delayed 20min? This isn't typical behavior. What streaming media server are you usign? FMS or Wowza? Define 'crashing'. Anything in the output log in FMLE or is your server 'crashing'.
Thank you,
Stephen Apple
Independent Broadcast

What happens if I have a credit card and an iTunes gift card in the App Store

What happens if I have a credit card and an iTunes gift card in the App Store And I buy an app? Does the iTunes gift card get deducted or does it get charged my credit card?

The gift card balance will be deducted unless you gift that application.
(73861)

What happens to Existing index after table partition and created with local index

Hi guys,
desc part id number, name varchar2(100), salary number
In an existing table PART i am adding 1 more column DATASEQ NUMBER. i am asked to partition the table part based on dataseq.now the table is created with this logic
create table part( id number, name varchar2(100), salary number, DATASEQ number) partition by list(dataseq) (partition PART_INITIAL values (1));
Suggestionn required. since the table is partitioned based on DATASEQ i am asked to add local index on dataseq. i have added local index to dataseq create index idx on part(dataseq) LOCAL; Now my question is already there is existing index is for the column ID and salary.
1) IDX for dataseq is created locally so that it will have partition on each partition on the main table. Please tell me what happens to the existing index on the column ID and salary.. will it again created in local?
Please suggest
S

Hi,
first of all, in reality "partition a table" means create a new table a migrate existing data there (although theoretically you can use dbms_redefinition to partition an existing table -- however, it's just doing the same thing behind the scenes). This means that you also get to decide what to do with the indexes -- which indexes will be local, which will be global (you can also re-evaluate some of existing indexes and decide that they're not really needed).
Second of all, the choice of partitioning key looks odd. Partitioning is a data manageability technique more than anything else, so in order to benefit from it you need to find a good partitioning key. A recently added column named "data_seq" doesn't look like a good candidate. Can you provide more details about this column and why it was chosen as a partitioning key?
I suspect that whoever suggested this partitioning scheme is making a huge mistake. A non-partitioned table is much better in all aspects (including manageability and performance) than wrongly partitioned one.
Best regards,
Nikolay

RE: WHS 2011 what happens to it with the release of windows 10?

Hi
So i'm glade Microsoft has seen the light with windows 10 and brought back the start button, I haven't had time to watch the presentation only the highlights.
The question I have is what happens with Windows Home Server?
Windows 10 is supposedly going to be all thing to all people, but they said that about windows 8; i'm hoping the difference now is that they have learned from there mistakes; home server needs tweaks for sure, and if its part of the free update even better.
I think having a central data store for homes is a necessity especially where the internet isn't unlimited like it is in Africa

Home server 2011 will not change/upgrade to Server 10. It should allow for Win10 client to connect/be backed up though.
Grey

What happens if 3700 with WSSI module is connected to 802.3af PoE port?

I know that the 3700 itself will drop to 3x4 MIMO if it only gets 15.4W of power (takes 16.8 with 4x4). If I add in a WSSI module, I know that is not enough power to run the WSSI module. We'd like to deploy our APs with the module installed and light up WSSI only as we get 802.3at power available. What I don't know is if the AP will light up as 3x4 with WSSI disabled, or if the AP will just completely fail. I should get a chance to test this soon, but if you happen to know, please tell!
Thanks!
Gary Hahn

If you have enough power to the AP, you can look at the GUI and under the main screen under Access Point Summary, you will see Dual-Band Radios... the WSSI or WSM will show up there.
Please rate helpful post and Cisco Support Community will donate to Kiva
Scotty

What happened to "REWIRE" with GB 10.0.1?

I'm using the latest version of Garageband 10.0.1. Was wondering what happened to the rewire function. I depend on it because I've arrangements that use Live 8lite with rewire.

Settings > General > Siri > Siri On.
To use Siri: Hold the home button for 3-5 seconds and speak to it.
About Siri...
http://support.apple.com/kb/HT4992

What happened to X201 with i7-620M processor and X201s?

Similar Messages

Maybe you are looking for