What happened with this DVD?!

Built, formatted, and burned a regular DVD-R in DVDSP, using my internal G5's burner. It plays fine on my Mac, and also on my set-top player.
Tested it on my PC laptop and got these results:
VLC Media Player - can't even launch it
Intel WinDVD (something like that, came with Sony laptop) - plays it OK
Windows Media Player - plays it at double speed, audio sounds like the Chipmunks.
Any suggestions? Should I try burning in Toast instead?

Lots of issues, long story short lots of gotchas for DVDs in Windows from DVD SP (and also in general).
http://discussions.apple.com/thread.jspa?messageID=2983004&#2983004
http://discussions.apple.com/thread.jspa?messageID=2982374&#2982374
Do a quick serach for VLC Media Player, WinDvd and WIndows Media Player, you will find many threads and issues...

Similar Messages

The PWR MGMT LED on the front panel of the sup720 is off. What happen with this?

The PWR MGMT LED on the front panel of the standby sup720 is off (But the active engine is on). We check the switch guide which states "The SYSTEM and PWR MGMT LEDs on a redundant supervisor engine or RSP are synchronized to the active module.". What happen with this? Thanks!

HI @bingxiong.feng,
This is not a cause for concern as Cisco says in the following link:
http://www.cisco.com/c/en/us/support/docs/field-notices/200/fn28695.html
HTH.
Rgrds,
Martin, IT Specialist

I am running OSX Lion 10.7.4 and the computer no longer will go into sleep mode when I close the cover What happened with this option?

I am running OSX Lion 10.78.4 and the computer will no longer go into sleep mode when I close the cover. In system preferences I can no longer find the option that allows for this energy saving feature. What happened to this option and why is this no longer happening with the latest version of Lion?

No external monitors or devices attached. When you mention that this function only works when devices are attached that is true when you set up your preferences that way. Up until my upgrade to Lion the computer would always go into sleep mode when I closed the lid. There also used to be an option to check in system preferences that allowed you to choose this option. My question for the discussion is what happened to that option and how do you get the computer to sleep or at least the display to sleep when you close the lid as we have been able to do in the past. Thanks.

What happened with this latest update?

My Skype automatically updated on Monday or Tuesday, and now I'm not receiving messages nor are any of my contacts showing as being online. What did they do THIS time? Is it just me, or does it seem like every time Skype updates, it performs worse than before?

Is your connection status on Skype Online? The status icon next to your name must be solid green with a white checkmark inside.

Any idea what happened with this BIND crash?

May 15 23:06:57 SERVER named[6630]: mem.c:1298: REQUIRE(ptr != ((void *)0)) failed, back trace
May 15 23:06:57 SERVER named[6630]: #0 0x433afd in ??
May 15 23:06:57 SERVER named[6630]: #1 0x7fa24887215a in ??
May 15 23:06:57 SERVER named[6630]: #2 0x7fa2488871bf in ??
May 15 23:06:57 SERVER named[6630]: #3 0x7fa2491fc0b4 in ??
May 15 23:06:57 SERVER named[6630]: #4 0x7fa2491a6a0a in ??
May 15 23:06:57 SERVER named[6630]: #5 0x7fa24918c5d0 in ??
May 15 23:06:57 SERVER named[6630]: #6 0x7fa24918c734 in ??
May 15 23:06:57 SERVER named[6630]: #7 0x7fa249203090 in ??
May 15 23:06:57 SERVER named[6630]: #8 0x7fa24921270b in ??
May 15 23:06:57 SERVER named[6630]: #9 0x7fa2488944dc in ??
May 15 23:06:57 SERVER named[6630]: #10 0x7fa2484460a2 in ??
May 15 23:06:57 SERVER named[6630]: #11 0x7fa247c0fd1d in ??
May 15 23:06:57 SERVER named[6630]: exiting (due to assertion failure)
May 15 23:06:58 SERVER systemd[1]: named.service: main process exited, code=killed, status=6/ABRT
May 15 23:06:58 SERVER rndc[6638]: rndc: connect failed: 127.0.0.1#953: connection refused
May 15 23:06:58 SERVER systemd[1]: named.service: control process exited, code=exited status=1
May 15 23:06:58 SERVER systemd[1]: Unit named.service entered failed state.
May 15 23:06:58 SERVER systemd-coredump[6636]: Process 6630 (named) dumped core.
out of the blue, bind crashed on this internal caching/forwarding BIND nameserver. all attempts to restart it would immediately result in the same exact error output, and the only solution was to reboot the server. haven't seen it since.
just a spurious error?

https://bugs.archlinux.org/task/40304

TS1702 Any body know what is happening with this app "eTodo" ? is no more in the iTunes store !

Any body know what is happening with this app "eTodo" ? is no more in the iTunes store !
I have this problem for one year I think and no one can’t solve that,I made 6 screen shots and I will uploading in a few seconds all of them and please just check them !
My problem is: I bought an application last year and after some time I had lost the app from my iTunes store.
Now,what I want to do is: I want to get that app again,but I could not find anywhere in the iTunes store,websites ,nobody could not help me with that
The app has been deleted from everywhere !

If the app is no longer in the store then you won't be able to redownload it. You don't have a copy of it in your computer's iTunes library or on your backup of your downloads/library so that you can sync it back to your phone ?

Satellite P300-1GI (PSPCCE) What happens with Vista after install of Win 7?

Hello,
I'm planning to instal windows 7 onto my notebook but want to know what happens with my windows Vista I'm currently running. I already have made the recovery DVD's but are these enough to reinstal windows Vista after I installed windows 7? or wat can I do to make this possible?
(I'm sorry for my bad english, I'm from the netherlands)
Thanks,
Futience

Hi
The recovery disk allows you to reinstall the Vista and all the Toshiba drivers and tools.
Dont be afraid to install Win 7.
If something will go wrong, you will be able to recover the notebook using the recovery disk. This will set the notebook back to factory settings
Cheers

Cloning Hdd to SSD boot drive and what happens with Music/Logic Plugins

Hi, my computer is a mid-2012 Mac Pro 12 Core
It's a great computer but I'm considering upgrading my main boot drive (WD Caviar Black 1TB HDD) to a 1tB Samsung EVO 840 SSD drive (I'm using a sonnet tempo PCI card to mount an SSD that holds audio at the moment and will add another SSD for the boot drive I'm referring to) so I just had a question - if I clone the HDD to the new SSD, what happens with things like licenses for my audio plugins, such as Native Instruments Komplete, programs by IKMultemedia. programs that use an ILOK such as Steven Slate Plugins and also, WAVES plugins? Will this info all carry across to the new SSD drive or do you think I'll need to reauthorise some things? I have all the serials etc so this shouldn't be an issue, but just wondered.
Any help would be appreciated as it feels like quite a big step in that it's my main system drive!
Thanks in advance
Sam

CCC is excellent. If it doesn't work then sure, just always have a safety net of your system that is untouched.
Also, after a clean install, CLONE it!
And then use Setup Assistant. Migration Assistant.
Clone of the system can go on sparse disk images too so you don't have to partition (should have at least one though) and you can have clone from different stages and versions: 10.9.4, without Setup Assistant, migrated, full loaded with all your apps. Multiple versions.
CCC is designed to make a working bootable copy of a system so you can move the system to another boot device like hdd and SSDs without the worry.
But I think we were talking about a system that did not see a clean install of Mountain Lion or Mavericks so it is over due for one!

In latest 2 days after update ios 5.01 my ipad2 suddenly restart when i reading from ibook, what happen with new update ?

In latest 2 days after update ios 5.01 my ipad2 suddenly restart when i reading from ibook, what happen with new update ?

Download the full version of the software then shift click the restore button. This will ask you where the firmware files are. Once you point to the firmware then you can install the official version

What happened with the pagemaker trial?

Hi, I'm trying to download the Adobe Pagemaker on my MAC and it's not working, can you guys help me or tell me why?
Thanks

I try that too but didn't open as well...???Do you think there's anyway you can send me the file?Thanks!
Nany           <Removed by Moderator>
Date: Fri, 8 Jun 2012 10:19:15 -0600
From: [email protected]
To: <removed by moderator>
Subject: Re: What happened with the pagemaker trial? What happened with the pagemaker trial?
    Re: What happened with the pagemaker trial?
    created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
This is a stuff-it archive. You can locate a copy of Stuff-it Expander at http://www.stuffit.com/mac-expander.html#compare. You can use this to open the sit file.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: What happened with the pagemaker trial?
To unsubscribe from this thread, please visit the message page at Re: What happened with the pagemaker trial?. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

What happened with the 7000 2011.q1 fw update

Dose any one know what happened with the 7000 2011.q1 fw update, we where eagerly waiting hopping to get the compressed replication feature (save in replication bandwidth).
Thanks,
-Eli

Restore your library from an up to date backup.
If you don't have a backup (which you really should), see turingtest2's user tip on Empty/corrupt iTunes library after upgrade/crash for steps necessary to restore your library within iTunes - this assumes that your media is all present on your computer, as it always should be.
Otherwise, see tt2's notes on Recover your iTunes library from your iPod or iOS device

What happened with my photoshop? the layers name disappear and every drop-down function getting smaller?

What happened with my photoshop? the layers name disappear and every drop-down function getting smaller?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

What happened with cc sync?

what happened with cc sync. its been more than a year since adobe advertise service file/folder sync, right? So why still it doesn't work? we paying for this service after all! any suggestions?

When Whats app is synced to my computer I think it just copies the app

Hi, I need your help, I don't know what happened with my iphone 4, but I can't edit my contact?

Hi, I need your help, I don't know what happened with my iphone 4, but I can't edit my contact?

try to make a hard reset (home button +power button for 15seconds) then restore by itunes.this is called DFU mode,once you done,can only restore the device by itunes!let me know if it works

Use to have a + on the right of the tab that when clicked, opens a new tab. what happened to this?

use to have a + on the right of the tab that when clicked, opens a new tab. what happened to this?

greghcrash wrote:
It Would be great to have keys on the onscreen keyboard.
Such as a computer keyboard.
With BACKSPACE, TAB WITH SETTINGS, DELETE, TYPE OF TYPE, BOLD TYPE, UNDERLINE ETC....
I HAVE A KEYBOARD COVER AND IF I NEED TO USE CERTAIN KEYS I HAVE TO SWITCH TO MY KEYBOARD CASE AND THAT IS VERY INCONVENIENT.
IT IS ALSO A TIME WASTER.
When you installed iOS 8 did you read about the new features? Applications can create custom keyboards…
http://www.imore.com/custom-keyboards-ios-8-explained
You need to look for an app that has a custom keyboard with the features you require, I suggest you find one without CAPSLOCK
greghcrash wrote:
IT IS ALSO AGGRAVATING WHEN TYPING AND IT AUTOMATICALLY CHANGES THE WORDS THAT YOU WANT TO USE.
THANK YOU FOR YOUR TIME
Again you need to look at how to manage the device - these settings can be turned off already & you can edit the 'suggestions' too.
Settings > General > Keyboards > turn Auto-Correction Off.
Sadly you cannot disable autocorrect temporarily, so it's all or nothing.

What happened with this DVD?!

Similar Messages

Maybe you are looking for