What happens if OD Master does not contain the most up-to-date information than the OD Replica

I have a Mac OS X Server v10.6 OD Master on a VMWare Fusion virtual machine and an OD Replica on a Parallels Bare Metal instance. One evening the volume containing the OD Master virtual machine just unmounted itself, when I manually remounted it Fusion now refuses to start the OD Master virtual machine so my only recourse was to restore the VM from an earlier snapshot. The OD Replica in the meantime was running smoothly containing an up-to-date LDAP data than the OD Master. What will now happen when a master-replica sync is attempted? Will it overwrite the data in the Replica with the older information from the mMaster? Or will it update the Master so that it will have the more up-to-date data from the Replica?

Hi
http://manuals.info.apple.com/en_US/OpenDirAdmin_v10.6.pdf
Page 60.
Replicas have read only access to the Master and they can't write data 'back up' to the Master. The relationship is top-down only. Master and Replica(s) must all be exactly the same OS as well as using the same NTP Server. If the Master is 10.6.5 and the Replica is 10.6.7 the Master/Replica relationship will be broken. The relationship is also broken if the Replica's LDAP database is newer than the Master's.
You should seriously consider promoting the existing Replica to an OD Master role. This will ensure the most current LDAP database is preserved. The old Master should be demoted and re-promoted to become the new Master's Replica.
Consult the Admin Manual (as linked above) as it does give relevant guidance on what to do in situations like yours.
HTH?
Tony

Similar Messages

  • What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod?

    What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod? I did this some time ago. On screen was shown available space somewhat less than 120 GB, but maybe somewhere between 10 and 20 GB more in the library. I had to get the iPod updated anyway, so I did proceed. However, afterwards the total content of the library was only about 110 GB. Now I wonder what did actually happen. Was the first sign only corrected for double copies of the same files or lost files or where files deleted from iTunes? And if files where deleted from iTunes, were they also deleted from my computer?

    Same as you would if you bought a pc; copy everything from your old computer to your new one.  Then you can just sync everything from the new computer, as you did with the old one.

  • Eclipse "selection does not contain main type" - but it does contain a main

    Hi!
    I'm having a strange thing happen to me when using the eclipse IDE in a macintosh envirnment.
    I imported a project, complete with package, and all of my classes. and when I try to run my main class, it tells me "selection does not contain main type".
    Which is entirely untrue, the class I am trying to run contains a public static void main(), does anyone know what's going on here?

    the class is quite large, I don't think that it is a problem with the class, because it runs fine on my windows based pc (also in eclipse)...

  • Project does not contain a valid connection problem

    I am using JDeveloper 10.1.3.2.0 and have checked out code that was in CVS. I tried to put the code under an Application and Project, but when I do the check out, the Application Navigator shows it at the Application level. Within that Application, there are two projects. When I do a Make on either project, I get the error that The Business Component Project does not contain a valid connection. Double clicking on the error send me to the corresponding .jpx file which contains this:
    <?xml version='1.0' encoding='ISO-8859-1' ?>
    <!DOCTYPE JboProject SYSTEM "jbo_03_01.dtd">
    <JboProject
    Name="ViewController"
    SeparateXMLFiles="true"
    PackageName="" >
    <DesignTime>
    <Attr Name="_ejbPackage" Value="false" />
    <Attr Name="_NamedConnection" Value="Fred" />
    <Attr Name="_version" Value="10.1.3.36.73" />
    <Attr Name="_jprName" Value="../ViewController.jpr" />
    </DesignTime>
    </JboProject>
    Does anyone know what connection needs to be set up? I wonder if part of the problem is how the CVS check out is working, but I can't seem to get it under an application.
    I'd appreciate any help!

    Hello.,
    Thank you so much for the responses! That was the problem. I had defined a database connection, but the name was not the same as what was in the jpx file. The error is now gone. :)
    Thanks again!

  • Document does not contain selectable items.

    Hello Gurus,
    My purchase team wanted to transfer plant from one plant to other.. and so they are creating STO , without any confirmation , while doing GRN 101 movement type Store person is facing error Document does not contain selectable items.
    Please help to resolve the same.

    Hi,
    1) this should be posted in MM forum, not here
    2) let the person go to MIGO , to menu Settings, click Default Values and check checkbox "Propose All Items"
    3) I guess if it is STO it would need goods issue first happening in source plant so that GR can happen in receiving plant (so first create Outbound Delivery in source plant, post goods issue against it and then do the GR with 101 against this delivery or PO itself)
    Regards,
    Tomek

  • Directory (AIR 3.4) does not contain a Flex SDK

    I had previously downloaded and installed the AIR 3.4 sdk in FB 4.6, but when I try to add it FB 4.7, I get:-
    Diretcory does not contain a Flex SDK
    How do I install the AIR 3.4 sdk into FB 4.7?
    I running on Mac OS X 10.7.4

    For everyone WHO IS ON A MAC and coming to this thread  -- and you're at wits end like I was..
    This is very important...
    This process will work flawless if you follow the steps on:
    http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html
    Follow them to a T. Don't drag, don't option copy, put tbz2 into your new sdk folder (step 1 below), do the unpacking from terminal under sudo using tar as the directions tell you to.
    An overview...
    1. Shutdown flash builder first and I highly recommend you backup the original 4.6.0 sdk folder and that you make a new sdk folder called            4.6.0_AIR3.x .. change x to be the version you are merging in. Put the tbz2 AIR file you downloaded from Adobe into this! Then unpack using sudo (plus the tar command they tell you to use in the above link).
    2. Update the <name> key under flex-sdk-description.xml after you unpack. append a (AIR 3.x) so you know what the *** this sdk is. To do this properly, and so you don't have permission issues.. do this from the 'ol command line in terminal. type: sudo nano flex-sdk-description.xml to edit it.
    3. Update your project to use the new SDK only. Project properties -> flex compiler -> Configure Flex SDKs
    4. Update your application namespace! Your project will error until you do! Edit your [myappname]-app.xml to reflect the proper AIR version in that first line that reads: <application xmlns="http://ns.adobe.com/air/application/3.x">
    Follow the steps and you should be golden.
    -Steve

  • Materialized View - does not contain a primary key constraint

    I am trying to create materialized view. I gone through the MV wizard creation. Added 2 columns (foo_column, foo_pk) of the table and have a simple select statement (Select foo_column from foo_dim). Also created a primary key contrainst and refencing the primary key (FOO_PK) of the dimension.
    I am getting the following error:
    ORA-12014: table 'FOO_DIM' does not contain a primary key constraint

    It was solved. The table that I am querying has to have a primary key defined before creating a materialized view.

  • Trying to download adobe program 'adobe p;hotshot CS5 Optional Automate Plug-ins' but get a message "does not contain valid signature"  Any ideas to get around that please.

    Trying to download adobe program  adobe photoshop CS5 Optional Automate Plug-ins, but get a message  that it does not contain valid signature and it won't install the app.  Can someone help with this please?  Trying to reach Adobe by phone is impossible.
    ev

    First, have you installed all the updates for photoshop cs5 by going to Help>Updates from within photoshop cs5?
    The automated installer only installs the following plugins:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4965
    The following plug-ins and associated files are available via an installer:
    Automate Plug-Ins:
    • Contact Sheet II 
    • Picture Package (ContactSheetII) 
    • Web Photo Gallery (WebContactSheetII) plus presets 
    • Script for Layer Comps to Web Photo Gallery
    Other Optional Plug-Ins:
    • TWAIN
    Other plugins including the pattern maker plugin need to be installed manually using this download:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4964

  • Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

    Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files. 

    Hi,
    Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
    Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
    Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
    If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
    a. OAB generation in Mailbox:
    \\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
    b. OAB distribution in Client Access:
    \\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
    Thanks,
    Winnie Liang
    TechNet Community Support

  • The master site control file does not contain a component item for SMS_STATUS_MANAGER.

    New to the System Center world. We are using a fresh install of Server 2012 R2 and System Center R2 with everything working until Server 2012 R2 Update 1 was installed. Now we are getting the following:
    Site type: Primary Site or CAS SMS_STATUS_MANAGER
    6/4/2014 1:35:21 PM 10996 (0x2AF4)
    Resolved the "Status Manager" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Resolved the "Site Control Manager (Master Site Control File)" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Parsed the master site control file, serial number 1551209029.
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    This site is the central site. SMS_STATUS_MANAGER
    6/4/2014 1:35:21 PM 10996 (0x2AF4)
    ERROR: The master site control file does not contain a component item for SMS_STATUS_MANAGER.
    SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
    10996 (0x2AF4)
    Sleeping for 60 seconds... SMS_STATUS_MANAGER
    6/4/2014 1:35:21 PM 10996 (0x2AF4)
    Any thoughts on how to fix this? Seen a few references to a "site reset" for SCCM 2007 but wanted to make sure there wasn't anything else to try before heading down that road with 2012R2.

    A site reset can also be done in CM12 so it's worth a try.
    Torsten Meringer | http://www.mssccmfaq.de

  • I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    # Question
    I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • I have an eMac which I want to connect to my home wireless network. My router is D-Link-601 tech 802.11n. My emac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

    I have an eMac which I want to connect to my home wireless network. My router is D-Link - 601 tech. 802.11n. My eMac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?

    You need the Airport card OR Airport Express but not both.  Considering the age of your machine, I recommend Airport Express as you will find other uses for it whenever you replace the eMac.
    To set up the AE, you do need OSX 10.4 or higher.

  • Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account

    Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account in order to access Icloud?

    If you want to change your iCloud ID or password on your phone go to Settings>iCloud and tap Delete Account, then sign back in with your updated information.  Note: this only deletes the account and any synced data from your phone, not from iCloud.  Provided you are signing back into the same account and not changing accounts it will be synced back to your device when you sign back in.

  • Error while executing webdynpro application : he URL does not contain full

    Dear All,
    I had installed SAP in my system.But when I am testing webdynpro application I am getting the belwo error. Please let me knwo what setting I need to do to avoid this error.
    Error when processing your request
    What has happened?
    The URL http://hari:8000/sap/bc/webdynpro/sap/z_test_pg was not called due to an error.
    Note
    The following error text was processed in the system DEV : The URL does not contain full domain specification (hari statt hari.<domain>.<ext>).
    The error occurred on the application server HARI_DEV_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: CHECK of program CX_FQDN=======================CP
    Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
    Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server HARI_DEV_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server HARI_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DEV -i: HARI_DEV_00 -w: 0 -d: 20080109 -t: 073032 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team

    Hello,
    Little extract from the SAP online help :
    In Web Dynpro ABAP it is imperative that a client browser with a fully qualified domain name (FQDN) has access to the AS-ABAP. For this reason the full URL must be assigned to a Web Dynpro ABAP application when it is called. The URL must not be shortened (for instance, no domain specification).
    More info on how you should do this can be found here :
    [Click|http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm]
    This will solve your problem.
    Success.
    Wim

  • Error: InfoObject does not contain alpha-conforming value 20030729

    Hi everyone,
    I got this problem, that i tried to fix yesterday, but all i did was that i got realy frustrated...
    I created an infoobject which is copy of 0DOC_NUMBER and has alpha coversion routine.
    Mapping field in DataSource is also type character 10(VBELN) as my infoobject.
    But there are some values in this field that i am trying to load, less then 10 characters long (20030729,20051116...) and shouldn't be there, because the values are dates and not document numbers.
    But anyway on R/3 side this values are in field which is defined as character 10 (VBELN), and when I am trying to load Infopackage(17500 records) I get 52 errors: InfoObject does not contain alpha-conforming value 20030729.
    I don't get it, since both fields are type character 10 and the values are only digits, why do I get this error message and how can I fix it?
    PS:One solution is to remove alpha conversion routine from infoobject, but i don't want that.
    Regards,
    Uroš

    hi,
    sorry... correction, it's 'Exclusive attributes' that cannot be used for navigational attribute, you can set lower case to differentiate ... check the impact of lower case setting here ...
    http://help.sap.com/saphelp_bw33/helpdata/en/b7/f470375fbf307ee10000009b38f8cf/frameset.htm
    Lowercase letters allowed / not allowed
    If this indicator is set, the system differentiates between lowercase letters and capital letters when you use a screen template to input values. If this indicator is not set, the system converts all the letters into capital letters when you use a screen template to input values.
    If you choose to allow the use of lowercase letters, you must be aware of what happens when you input variables:
    If you want to use the characteristic in variables, the system is only able to find the values for the characteristic if the lowercase letters and the capital letters are typed in accurately on the input screen for variables. If, on the other hand, you do not allow the use of lowercase letters, any characters that you type onto the input screen, are converted automatically into capital letters.
    Exclusive attributes:
    If you select Exclusively Attributes, the created characteristic can be used only as a display attribute for another characteristic, and not as a dedicated characteristic in the InfoCube. Furthermore, you then cannot transfer the characteristic into InfoCubes. However, you can use it in ODS objects or InfoSets.

Maybe you are looking for