What happens if storage temperature exceeds limit?

I recently returned from a road trip from LA to Las Vegas. Being the middle of summer, ambient temperatures reached up to 115 F degrees. I had my MBP in a black carrying case in the un-air-conditioned trunk, where I thought it would be reasonable shielded; when I took it out tonight at 6PM, the temperature of the metal frame (all over) of the computer was almost scalding to the touch. I know the storage temperature limit is 113 F, and I have no idea how hot it actually was in that trunk, but should I be concerned that my MBP was damaged? Is there a way to run a diagnostic? It seems to be working ok now...Thanks.

Is there a way to run a diagnostic?
Use Install DVD1 and hold down 'd' when Booting up

Similar Messages

  • What happened to Library temperature/tint controls?

    In LR4, I was quite attached to the easy-to-use temperature and tint controls in the Library module.  Now, in LR 5, those seem to be gone and I find the sliders in the Develop module much less handy.  Is there some way to get the other controls back?
    Paul

    Can you still see the Quick Develop panel, or has that gone AWOL?
    If you can see it, try the little disclosure triangles.
    If you can't see the panel, you may be able to help me track down a bug.....

  • In Labview 8.5, what happens if the signal input exceeds the signal input range set by the DAQ Assistant?

    Hello all,
    This should be a pretty simple question, but I can't seem to find the answer on-line and don't currently have the capabilities to test this:
    I'm using LabVIEW 8.5 and have a VI that imports sensor data through the DAQ Assistant. In the configuration tab there is a signal input range. What happens if my sensor exceeds this range? Will I get a warning? Will the value default to the maximum (or minimum)? I was interested in writing in some code to display an error as I approach the limits of this range, but was unsure if I also needed to include some code to display an error if the range is exceeded as well.
    Thanks for the help,
    Tristan
    Solved!
    Go to Solution.

    Hello Tristan,
    The behavior depends on the range you choose and the device you are using.
    If you are using a device with only one valid input range, we will use this range even if you set a smaller minimum and maximum in the DAQ Assistant.  Thus, if your device only supports ±10V and you set the range to ±8V, you will still continue to get valid data after your sensor exceeds 8V until you approach 10V.  Once you reach the limit of the range of your device, the output will "rail" and just return the maximum value until the signal drops below the maximum again.
    Note: A device that is nominally ±10V usually has some overshoot (like ±10.2V) that is typically specced in the manual.
    However, if you are using a device with multiple input ranges then things get more complex.
    The NI-DAQmx drive will pick the smallest range that fully encompasses the range you choose.  So, suppose your device supports the following input ranges: ±0.2V, ±1, ±5V, and ±10V and you choose 0V - 3V as the range in the DAQ assistant.  The NI-DAQmx driver is going to look at your input range and the list of input ranges that your hardware supports and choose the smallest that encompasses the full range you set.  This would the ±5V, because that's the only range that contains up to 3V.  As a result, any input signal between ±5V will be returned and any outside this range will "rail" to either the maximum or minimum value.
    We do this because using smaller ranges make more effective use of the resolution of the ADC.  Thus we try to use the most efficient range based on what you request without picking a range that will cause you to miss data.
    Let me know if I can clarify this further. 
    Seth B.
    Staff Test Engineer | National Instruments
    Certified LabVIEW Developer
    Certified TestStand Developer
    “Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams

  • What happens after numerous failed password attempts on a FileVault enabled system?

    Just curious what happens when someone hits the limit of password entry attempts on a FileVault enabled system?  Does it wipe the disk?  Or is the encryption key broken rendering the disk unusable?

    "If you forget your login password for a OS X Lion FileVault-encrypted drive, and you had chosen to store your recovery key with Apple, you may contact AppleCare and request retrieval of your recovery key. Typing in the wrong login password three times will produce a note under the password field which states, "If you forgot your password, you can… …reset it using your recovery key."
    http://support.apple.com/kb/HT4790

  • I was attempting to set up iCloud on my iPhone and my contacts were wiped out. What happened?

    I was attempting to setup my iPhone on iCloud and while downloading it wipe out my contacts. What happened?

    Device reached the limit of three free icloud accounts that Apple allows to be created on one device. Need to use another Apple device to create new account. Still can use icloud accounts but can't create new one.

  • What happens if i purchase apps when home page limit is exceeded already

    New to iPhone. I know iPhone 5 has the limit of 11 pages of home screen, and I wonder what happens if I accidentally continue to buy apps when it's already over the limit. Will it warn me or it will start removing apps to make room for new ones?

    The apps will still download to your phone, they just won't be on your home screen. You can still access the apps by searching for their names. To do a search, from your home screen, swipe from left to right until you see the search screen.
    Why don't you group apps into folders to make room for more?
    Deleting, Rearranging and Grouping Apps

  • HT204264 iDevice Sync Query - IOS Photos & iCloud Photo Library over filling ipad iphone storage - what happens next?

    Device Sync Query - IOS Photos & iCloud Photo Library fills ipad iphone storage - what happens next?
    Quick question, when you select IOS Photo / IiCloud storage (photos are optimised etc) what happens when ipad / iphone storage is full and you now need to add new apps, photos etc?  In my case I have  3 * 64gb ipads & 2 * 128 gb iphone but these are all filling up with photos since enabling IOS Photo &  iCloud Photo Library (as all of my photos on each device are now copbined on every device as well as the cloud).  This has become a problem as when I try to sync my idevice I get the device full warning (and I am assuming I now need to delete apps / videos if I want to sync or make more space for new photos etc). As far as I can tell once you enable IOS Photos and iCloud all photos will upload at original resolution and download at idevice resolution and there is no way to select / control the photos you want to keep on phone  (eg if you delete photo on phone it will now delete the original on cloud).
    Couple of questions / Suggestions:
    - Will IOS Photos on IOS device  automatically lower resolution of pics or use thumbnails for old photos that are already in icloud to ensure that there is space on device for new photos,  apps videos music etc. Eg will old photos that have already been uploaded in icloud be replaced by new apps videos music etc (not sure that the IOS Sync or iCloud currently does this)
    - Is there away to limit control or limit the number of IOS photos that sync to each idevice (eg by starring photos)? I had a look and can not see away to select photos you want to keep or remove (without deleting them on cloud).  As per above I am hoping that the IOS sync and icloud systems are smart enough to replace Photos that have already upgraded to cloud with a lower quality / thumbnail to make more more room for new photos and apps (but not clear if this occurs)
    - If this is a problem now what happens once the new PHOTOS launches for OS Desktop eg will it add in all our photos from iphoto to the icloud then to the idevice as part of the OS PHOTOS UPGRADE. I have 15-30 gb of photos in IPHOTO that are now backing up to icloud, there needs to be away to only select starred photos or albums or every photo try to download to my iphone (which will kill my storage). There also needs to be away to keep photos on idevice (for those times when you do not have internet and can not download from iCloud to iDevice
    Apologies if I have missed something obvious and welcome any thoughts & answers.
    If there is no solution then Apple needs to look at this and highlight it as a risk to customers who switch as this is being sold as a way to minimise your device storage but can lead to to customers using up more  storage for photos on ipad iphone as a result of switch to IOS PHOTOS &
    iCloud Photo Library

    Things are not as dire as they might seem at first glance. My 66GB iPhoto Library became a 40GB iCloud Photo Library (~11K photos, ~300 videos) and only uses 2.2GB on my iPad and 2.4GB on my iPhone. Scaling that experience, a 64GB/128GB iOS device should be able to easily handle a 300GB iPhoto library. My iPad and iPhone are 32GB devices and I expect them to be livable through at least 30-40K of photos.
    16GB devices have always been problematic for space even before iCloud Photo Library so I'd expect anybody with a 16GB device and more than a few thousand photos is not going to be able to use iCloud Photo Library with it. They will have to use iCloud Photo Streaming to get photos to iCloud Photo Library and iCloud Photo Sharing or iTunes syncing to get a subset of photos back to the device. Not a great solution but workable. However, it wrecks one of the best features for me which is using my iPad to edit the photos I take on my iPhone.
    The part that worries me is the automatic space management routine. The problem it creates is that I might want to add a movie, but there won't be enough space, and my only option will be to reset iCloud Photo Library on the device to get back to all thumbnails on it to see if that gets me the space I need. I've already had to do it a couple of times with iTunes Match and it's not fun. It all depends on how aggressive Photo Library will be in trimming off full-size photos/videos and Apple appears to be leaving it a black box at this point. It would at least be nice to know an estimate of the minimum size so I know how much space I can recapture.

  • What happen if the WAE capacity exceed?

    hi.
    I wonder if the capacity of wae exceed, what happen on wae?
    I think, the wae seems to like bypass that traffic. so bypassed traffic didn't accelerator.
    if there is wae in the middle between two end-to end wae, the wae in middle accelerate above those bypassed traffic?
    if you know, Please let me know.

    Hi,
    If the connection limit on the WAE is exceeded it will enter the TFO overload status and all subsequent TCP sessions will be placed in Pass Through (e.g. not attempted to be optimized).
    When the WAE exits this condition by TCP connections closing on the end client or server then new TCP connections will be flagged for optimization.
    While the 1st WAE is in the TFO overload condition if you had an intermediate WAE that was not in TFO overload it would flag the SYN packet for optimization per the normal TFO auto discovery process and if the server side or 3rd WAE was not in overload then this traffic could be optimized between WAE 2 and 3.
    Hope this helps,
    Mike Korenbaum
    Cisco WAAS PDI Help Desk
    http://www.cisco.com/go/pdihelpdesk
    P.S. if this answers your quesion, please mark it as answered with a 5.

  • What happens when max job limit of few RAS server is reached?

    Hi, I would like to know what happens when max job limit of server is reached. I know that we need to increase the job limit but my question is a bit different.
    We have 7 RAS per servers. I got this message "The maximum report processing jobs limit configured by your system administrator has been reached" on 4 RAS servers but not all 7. I am tracking servers using PIDs on WIndows server 2003.
    Does this means this is a warning that Job limit of 75 (in our case) has reached for 4 servers and for remaining 3 servers its still not reached. This means 3 servers are still able to handle more report request as they have not reached their max limit.
    OR
    This message means all of the servers have reached to their max limit and there is no more request which can be taken.
    We are doing 3000 users performance testing on 21 RAS servers.
    We are on BOXI R2 SP3 on IIS and opening crystal reports using .NET SDK.
    Thanks,

    This is same as my other question so I am closing this too. We have set limit as unlimited and during peak load we had almost balanced reports on all RAS.

  • HT204088 I already purchasing game item yesterday. It was written unable to purchase. I though my transaction was failed so i tried again and again but it still unable. And now my credit cards over limit. What happened here?

    I dont know what happened, i get charged from my father visa credit card. I play Ragnarok Valkyrie Uprising game which can buy shop item(name ruby). First time i tried to purchasing 210 rubies it cost 189 In Rupiah(Indonesian currency) but it was failed and showing dialog box unable to purchase ruby. So I tried again and again bought rubies with different values (10 rubies,50 rubies,210 rubies) but that unable to purchase dialog box always appears.  I though the purchasing rubies transaction was failed. Then i was trying to find whats wrong and get some information from the internet all day until i calling my credit card (Citibank/visa) technical support, he said i was already did some transaction for this. i ever did rubies transaction before and it was completely working. Please help. wheres my money gone? wheres my 210 rubies? I even cant check my billing information and purchased history cause my credit card is declined by itunes cause over limit. Pls give me respon to solve this.

    Hello Ading,
    It sounds like you were charged for an in App purchase but did not receive the item. I would report this issue to iTunes Store support with the following article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
    Find the email receipt for your purchase.
    Click Report a Problem under the app that is having the issue.
    When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
    Click Report a Problem next to the item you are having an issue with.
    From the Choose Problem dropdown menu, choose the appropriate issue.
    Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
    Click Submit to have your issue reviewed.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I have dropbox on my PC.  I no longer want to use that as my storage and backup.  I just paid $20 to buy more storage in I Cloud, yet my phone isn't backing up to it.  It just keeps saying backup is incomplete.Can I get rid of Dropbox?What happens to pics

    I currently have Dropbox on my Samsung PC to use for picture storage.  I no longer want to use Dropbox, and just bought extra storage from I Cloud.  When I tried to back up my phone onto the PC, it says the latest backup is incomplete and it won't do anything more to back it up. 
    1.  Can I get rid of Dropbox entirely, and if I do, what happens to the pictures that are in that storage?
    2.  Why won't the phone back up?  It is plugged into my laptop, wifi is on, and the phone is locked?

    iCloud is not a file storage system (dropbox is)
    I don't understand the rest of the post, if you are backing up to iCloud there would not be a cable, are you backing up to iTunes on your PC possible?

  • What happens to my apps, iTunes card, and iCloud storage if I change my Apple ID?

    What happens to my apps, iTunes card, and iCloud storage if I change my Apple ID?

    Depends upon what you mean by change.
    If you update your existing account to have a new primary email address then you shouldn't lose any of the account's past purchases, balance, or iCloud storage - you may have to log out of the old version of your account by tapping on it in Settings > iTunes & App Store and then log back in with the updated version, and similarly for iCloud (Settings > iCloud > Sign Out).
    If you create a new account then your existing account's purchases, balance and iCloud storage will remain tied to the existing account, you can't transfer them to a new account or merge the new account with the old one.

  • I just bought the 20g iCloud storage yesterday but I thought it was to bump the total upto 25g! I wonder what happen to the 5 free for?

    I just bought the 20g iCloud storage yesterday but I thought it was to bump the total upto 25g! I wonder what happen to the 5 free for?

    The new plans are based on total storage so the 5GB is no longer an addition.  Presumably the price reflects the fact that you get 5GB free.

  • What happens when IDSM-2 performance is exceeded

    Hi,
    we have IDSM-2 with about 20 inline vlan pairs in test environment. What happens to inline traffic when we exceed declared throughput of 500 Mbps? Is traffic dropped or is it forwarded without IPS inspection.

    If you exceed the monitoring capability of the sensor, then packets that can not be monitored will be dropped by the sensor.
    NOTE: 500Mbps is not an absolute performance number for the sensor. It is a performance level that the sensor has been testeed to be able to handle for specific types of traffic used in the performance test. It is unknown exactly how much traffic the sensor will be able to handle for your network. The IDSM-2 will likely handle AROUND 500 Mbps is many and even most customer networks. However, networks do vary and in some networks it may handle quite a bit less traffic, and in other networks might handle even more.
    So the question isn't what will happen if you send more than 500 Mbps, but rather what will happen if you send more of your traffic than what the sensor is able to monitor. And the answer is that any traffic that can not be monitored because of performance limitations will be dropped by the sensor.
    The only time packets are forwarded without inspection is if sensorApp has stopped monitoring ALL packets (either a reconfiguration or upgrade is taking place, or the sensorApp process has crashed) AND the auot software bypass functionality has kicked in. In which case ALL packets would be forwarded without analysis.

  • HT4847 Why would I back up games and other apps in iCloud? If I don't back them up (to free storage space) what happens if I lose my phone?  Thanks

    So I've never asked a question before and and unsure why I have to re-ask it here but here goes.  I received an e-mail that my iCloud storage id full on my iPhone4. I see that I have every app backed up?  What does that do for me?  Why would I want to back up games, or SiriusXM, things like CNN, Skype apple store? And what happens if i don't back them up and lose my phone?
    Thanks
    Gerri

    If one day you need to restore from a backup due to stolen, replaced, or corrupted system on a device, apps not included in the backup will not have their data files restored. I don't turn on a lot of my apps since I don't care about any data they may store (e.g. CNN recent stories or game points).  But I suspect that these apps contribute very little to total backup space. It's the camera roll and apps like Goodreader that store a lot of PDF and other files locally that pad up a backup.

Maybe you are looking for